The NVR is NVR4216-4KS3 with 2 types of camera
-HDW1639T-A-IL-0280B
-HFW1639TC-A-IL (bullet)
I noticed something.
My problem is only HFW1639TC are recording (8 cameras) with setting for only when motion is detected, and HDW1639T is not recording at all, but both cameras have the same type of...
I am using the SmartPSS app for Mac and the DMSS app for mobile. On mobile, I can get push notifications to work on my mobile, but when I try to go into remote configuration in the DMSS app on mobile and make sure to go into motion detection and its advanced settings, I can't successfully save...
I have had a Dahua 4A425 for some time now, but have never setup up the auto tracking on it. I'm having a hard time finding any resources that detail the setup I would like. Hoping someone here will have some insight. I would like the camera to be on a constant pan from one side of my property...
I have a motion sensor in the corner of a wall & ceiling that I want to replace with a PoE camera. See attached image. Hopefully the next couple of weeks I will open the wall and pull some Ethernet cable to that location (same place where the other cable for the motion sensor is currently coming...
I have a Dahua NVR (NVR4216-16P-4KS2) with multiple Dahua ip cams (HDW2431T-ZS-S2). Motion is almost always captured too late, object just leaving view when recording starts. I setup pre-recording through nvr but it does not seem to work. Playback through DMSS, smartPSS or via weblink from...
Hey guys, been at this problem for days now so I think it's time to ask for help :)
I implemented a dahua setup at a guy's place containing a dahua nvr (v4) and 11 dahua ip cams. Most cams are on the LAN, a few directly at the nvr poe ports. I've setup simple MD.
A few weeks ago the guy rang...
First, appreciate the forums and all the good info. Sorry for the long post but I'm looking for the best advise I can get!
So currently I have 2, 3xLogic VX-4V-OD-RI-02 domes on a lamp post highlighted below and a 3rd further down on a private road. They have been in place for a few years and...
Hello All,
Last night after arriving home form work there where a number of shots fired within 60 feet of my residence. The Police arrived and asked if they can view the footage of my cameras. My cameras have served me well thus far but from time to time because I have them set for motion...
Hi All,
I am using Hikvision ip camera. My camera is not continuously detecting the motion of the same object continuously so lets say
I am moving before the camera then my cam detect the event then it detect for 5 sec. and then clear after that even if i keep doing the movement then it is not...
I have some older (10+ yo) Axis camera that can do motion detection, but I have been using BI's built in motion detection to date.
1. I'm wondering if the built-in Axis detection algorthim is better than BI's - anyone know?
2. My CPU often runs 70% (I have 3 cameras). Is this mostly due to...
Hello,
Is there a way to make AI scan only the Alert image for objects (checking the whole image) without creating an additional motion zone?
I'm new to codeproject AI and struggling with the below example:
I have an LPR scenario where I need my motion zone trigger on the right side of the...
Hi. Thanks for reading this post.
Anyone who uses a Hikvision NVR and genuine Hikvision cameras will understand how important and useful the green smart event motion detection markers are that appear along the timeline. These motion indicators allow you to review an hours worth of video in just...
I fairly recently had a hdd die, and had to start totally over. I am getting duplicate alerts/notifications when a camera is triggered. I have researched left and right trying to figure out how to fix this but no luck, hopefully y'all can help. I also ran repair database. For this porch camera I...
First question I have is about the DS-2CD23X7G2. Can the ones without the strobe light (LU) be set to activate the light when motion is detected. I heard that some firmware versions had the feature but not sure about the latest one. I'd like to know for both the G3 and G5.
Second question I...
I am trying to capture rodent activity on one of my cameras connected to Blue Iris, but so far it is not working. I have "use zones and hotspots" checked and the area properly selected. I have "min object size" set at the smallest (100) and "min contrast" set at 20. I likely need to take...
Have some animal leaving giant piles of poop in my yard. Is there any recommendation on motion detection for a dog? Ideally I'd like an alert generated if a dog or a dog sized object is detected.
I have IPC-T5442T-ZE on latest Blue Iris. Beginner to intermediate understanding of Blue Iris and...
Hello everyone, i have followed with hundreds of these threads and loved the knowledge you all have so here is my question..
Just purchased a Dahua 2MP active deterrent IPC camera to add to the front door,
(Model IPC-HDW5241H-AS-PV)
I specifically chose this model as when i walked in the...
There appears to be a bug with this NVR and camera combination.
When setting up corridor mode (physically rotating camera 90 degrees and then rotating in the image settings) all motion tracking and VCA detection (line cross and intrusion) stop working.
If I change the rotation back to normal...
Anyone got this working on 2021 R1?
So i need to setup alarm + email whenever there's a movement at night for specific cam,
I found some tutorials mentioning i need to use input from the cam like this one
But the problem is, out of 5 cams only 1 cam has input, and it has 5 of them, so there...
Hi all, I've noticed something strange in Blue Iris which I can't quite figure out. I define a zone for one of my cameras using a live preview image where I paint or clear the bits of the picture I want covered or uncovered by the zone.
When I then go to view a clip and enable the 'Test run...
I noticed after going through my clips day in and day out that almost every clip that has the shortest possible video time or so (= pre-trigger time + post-trigger timeout “break”) is useless. A false alarm from some bug, or some leaf, or something. I don’t mind recording these, but it gets old...
Hi All
I have BI5 running, with Sentry AI as well. So far, so good.
It's integrated with Home Assistant as well, and it works for the most part. (motion detection not showing in HA)
I have a problem with BI switching profile from "Away/Ude" (2) back to "Home/Hjemme" (1) without me knowing why...
Note: I will no longer be providing release updates or responding to questions on this thread. If you would like to stay up-to-date on releases you can subscribe to release notifications on the github project. For support open a github support issue.
A few weeks ago I came across The Hook Up's...
Hi all,
I was wondering if anyone has a similar issue and was able to figure this out. Is there any way to stop the camera to send the 'motion detection stop' notification email on Dahua.
Everytime a motion is triggered it sends 2 emails. One with the attached pics and another one for the...
Hello. I am new to the world of IP Cameras and have just purhcased my first Dahua IP Camera the IPC-HDW5231R-ZE
I have a youtube Channel where I have set up a Live Interactive Bird Feeder and the Camera uses RTMP to stream directly to youtube. Instead of streaming 24/7 I would like to stream...
One of my cameras is outside, pointed toward our chicken feeder. We use this camera to observe nocturnal wildlife -- mostly rats, opossums and raccoons -- as they come to eat the chicken feed overnight while the chickens are safely locked in their coop.
I had my alerts configured pretty well in...
I just got a Hikvision-USA DS-9632NI-H8 NVR running firmware V3.1.4 Build 150625. Cameras are Hikvision and have set each camera so they are activated by motion. ( I previously used all 12 of my camera with BlueIris and the motion recording worked fine) 9 of the 12 cameras only record when NVR...
Hello all, I have hey question about blue Iris Version five How can I change the trigger time so when it activates so I can extend it to 5 or 10 minutes or long ? There was a break-in next-door vehicle coming in but it got chopped off.. I guess it did not record long enough until motion...
I got my HFW5231E-Z12E and it is very enthusiastic about storing a series of snapshots to my FTP when motion detection is triggered. I played with the anti-dither setting and looked around for anywhere that I can tell it "dude, ONE photo would be perfect, I don't need four to six of them per...
Hi - Does anyone know how to set these up to record alerts to Dahua's cloud?
I effectively use both iDMSS and IMOU. The camera is working fine with PIR alerts functioning. Pushing notifications coming through on both apps but its not recording alerts to Dahua's cloud. I have an active...