I can still zoom. There is no difference in that regard.
Just checked...I'm able to zoom in.Anyone notice with substreams enabled, you're no longer able zoom in/out on that camera?
I'm on 5.2.7.5, is that what you're on?Just checked...I'm able to zoom in.
I'm also on 5.2.7.5. Able to zoom in with the scroll of the mouse wheel.I'm on 5.2.7.5, is that what you're on?
After adding a substream to a camera, it will no longer zoom. At first it still zooms, but after a restart or if I edit another camera, it looses the ability to zoom. After removing sub stream, zoom ability comes back again. Using 640x480 res on my substreams.
I don't even get the blue arrows or any of the typical PTZ mouse icons like I normally would.I'm also on 5.2.7.5. Able to zoom in with the scroll of the mouse wheel.
View attachment 61238
View attachment 61239
Yeah, soon as I go into config and blank out the sub stream path, the arrows and zoom work again.
Ken informed me not to run your FPS on the sub stream to low...this is why I was getting yellow alert. I raised the fps to 5 and left the bit rate real low and now all looks goodNothing in status or log. But if I remove sub stream entry, it does go away.
No problems here with PTZ zoom on substreams with BI 5.2.7.5 and Dahua cameras.
I'm using Sub Stream 2 and here's the string that works.I’ve been trying to get a substream working for my Dahua 5231s and haven’t been successful. Anyone try this and get it working with this model of camera, please post the string. Thanks
Also might be worth checking that the sub-stream is enabled on the camera itself.I’ve been trying to get a substream working for my Dahua 5231s and haven’t been successful. Anyone try this and get it working with this model of camera, please post the string. Thanks
Main stream
text into the Sub stream
box.?
) after the text you pasted in the Sub stream
box.Params
text into the Sub stream
box after the question mark.subtype=0
to subtype=1
. (or subtype=2
if using the second sub stream on a camera that has multiple)Main Stream
text and change {CAMNO}
to 2
.No, I was talking about digital zoom actually. But, I fixed the issue, I'll share what I changed in case it helps anyone else who's having issues with substreams.