Thanks so much, that was the password that I put originally, but the system does not respond to that password it says that the password is incorrect (cameras and NVR). Any ideas what could be happening?
Regards
Carlos
Regards
Carlos
The password extracted from the camera should work on the camera, and by default it will also be the NVR password, if the camera was added to the NVR PoE port in Plug&Play mode - and if the optional 'alternate camera password' has not been set in the NVR VGA/HDMI Camera Management interface.the system does not respond to that password it says that the password is incorrect (cameras and NVR). Any ideas what could be happening?
Device Information | |
Firmware Version*: | V3.4.90build 160926 |
Complete Device Serial Number*: | DS-9664NI-I81620151130CCRR559857238WCVU |
Current date on device* : | 2020-02-23 |
Device start time & date on SADP* : | (2-23-2020 12:50:51 AM) |
It looks like you have!I believe I followed the correct steps with an older DS-2CD2032F, running V5.3.0 with a reset button!
More likely just a fan of his.Justin Jordan is an American comics writer. He is known for co-creating The Strange Talent of Luther Strode and its two sequels, and for writing 22 issues of Green Lantern: New Guardians.
Hopefully not one of the many that I was watching.The NVR I am trying to make use of was an eBay purchase
Of course, always fun to do that, and see what interesting passwords get used ...hoping you can spare a little time to help me out with a DS-2CD2332-I that the password was lost on.
UPnP is / was on by default in Hikvision cameras.Really odd though, no port forwarding set up at all.