ANNKE I61DR 2MP (Hikvision Cube Clone)

[alastairstevenson]

Check the links in post 562.

 

[strathglass]

I have one of these that has gone out of focus:
for the life of me I cannot find the screen to adjust focus.
Can anyone help point me to the correct way to get into a screen that will let me adjust or auto focus the camera?

 

[alastairstevenson]

One of the cube cameras?
These are fixed focus.
The lens is very exposed, maybe check if something has contaminated it.
Can you post a sample screenshot?

 

[strathglass]

One of the cube cameras?
These are fixed focus.
The lens is very exposed, maybe check if something has contaminated it.
Can you post a sample screenshot?

Thanks ... explains why I couldn't find the focus screen LOL.
Not sure what the issue is, but it is looking through a window, it is just not normally this bad:

 

[Mike A.]

Thanks ... explains why I couldn't find the focus screen LOL.
Not sure what the issue is, but it is looking through a window, it is just not normally this bad:

That's likely the problem. Could be the way light is hitting the window now, or dirt, or whatever combination of other factors.

Try pointing the cam at a different place and/or angle or inside and see if you have the same issue. If it's out of focus even inside then there's a problem. If not, then as above.

 

[strathglass]

You were write ... it is already looking better in a different light. I guess I never noticed that before. Thanks.

 

[stl1]

Is there any updated firmware for this that I'm not aware of. I'm on V5.4.5 build 170123 but not finding a lot of information. I know these are old, but i'm still using about of these. Thanks in advance.

 

[OfficerD00fy]

Is there any updated firmware for this that I'm not aware of. I'm on V5.4.5 build 170123 but not finding a lot of information. I know these are old, but i'm still using about of these. Thanks in advance.

Runing 5.4.83build 181011