BI Zoom Support for Dahua IPC-HFW2320R-ZS-IRE6

E

eatmorfood

n3wb
Mar 14, 2016
28
1
I just bought one of these
http://www.dahuasecurity.com/products/ipc-hfw2320r-zsvfs-ire6-1402.html

This model has the motorized verifocal lens.

However, I am unable to get the optical zoom to function in BI.

I can only get the image to show by using main stream rtsp.
The profile for HFW2300r-z does not produce an image.

Blue iris is up to date with release 4.3.9.6 x64

Any suggestions other than email BI support and wait for a patch?


screenshot.pngscreenshot2.png
 
Unfortunately, that did not work.
I get the magnifying glass on the screen with the + or - and click, but no reaction.
ptz3.png
Thanks for the tip on the other thing about the colors, did not know that.

We've got this huge warehouse and are putting in about 50 or so cameras.

We bought this verifocal cam that I just put up in the ceiling today to test it out and decide on placement if we go forward with more like it.
I chose this cam over the the cam that is supported in BI (HFW2300r-z) since it has the longer Ir distance - not that it really matters at the distance its currently mounted at.
 
eatmorfood said:
Unfortunately, that did not work.
I get the magnifying glass on the screen with the + or - and click, but no reaction.
View attachment 11780
Thanks for the tip on the other thing about the colors, did not know that.

We've got this huge warehouse and are putting in about 50 or so cameras.

We bought this verifocal cam that I just put up in the ceiling today to test it out and decide on placement if we go forward with more like it.
I chose this cam over the the cam that is supported in BI (HFW2300r-z) since it has the longer Ir distance - not that it really matters at the distance its currently mounted at.
Click to expand...
try scanning the camera with find/inspect, then use the ONVIF option in the ptz dropdown.
If that doesnt work you will need to email support and provide access to the camera.
 
Unfortunately, that did not correct the issue either.
I have emailed support.

Next question is camera placement.
I'll post that in a different section.

thanks.
 
You must log in or register to reply here.
Top Bottom