bi5, remote management - 99% CPU on server

S

Shaun Barrow

n3wb
Apr 19, 2016
26
8
Hello all, just installed the BI5 on my server, idle CPU without BI interface running is about 36%. Whenever I have the console open locally it will pop up to 90+. So I tested installing the remote management on my local PC and test remotely connecting to see if the same thing happens with CPU on the server, it does... CPU on server hits 98% and CPU on client side is about 12%. It was my understanding, maybe my assumption that the CPU consumption would be less on the server side when running the management tool on a remote site. Am I missing something? or is this the expectation?

BI server Specs:
i7 6700
8GB of RAM

Cameras:
7x DS-2CD2042WD-I @ 2688x1520
1x DS-2CD2085FWD-I @ 3840x2160
3x IP2M-841W @ 1920x1080
1x IP4M-1051W @ 2688x1520
1x FI9826PB @ 1280x960
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Shaun Barrow said:
Hello all, just installed the BI5 on my server, idle CPU without BI interface running is about 36%. Whenever I have the console open locally it will pop up to 90+. So I tested installing the remote management on my local PC and test remotely connecting to see if the same thing happens with CPU on the server, it does... CPU on server hits 98% and CPU on client side is about 12%. It was my understanding, maybe my assumption that the CPU consumption would be less on the server side when running the management tool on a remote site. Am I missing something? or is this the expectation?

BI server Specs:
i7 6700
8GB of RAM

Cameras:
7x DS-2CD2042WD-I @ 2688x1520
1x DS-2CD2085FWD-I @ 3840x2160
3x IP2M-841W @ 1920x1080
1x IP4M-1051W @ 2688x1520
1x FI9826PB @ 1280x960
Click to expand...
Are you using limit decoding?
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
What are your frame rates? are you using direct to disk? The console should not be 90 when open locally. Is it a 4k monitor?
 
Im sorry, when I say its 90% "locally" that is when i load the console in a RDP, this has always happened in BI4 and 5, I believe its the norm.. But my issue is running the management console remotely in BI5 causing the server to run at 90-98% NOT using RDP or anything like that. All cameras are around 10 FPS,
upload_2019-6-1_11-3-57.png
upload_2019-6-1_11-5-19.png
upload_2019-6-1_11-6-9.png
These settings are what i have for all of my cameras.
 
Just tested the remote management again, and now as soon as I connect to the remote server my BI5 client on my PC just crashes. Uninstall/Reinstall same issue. Event logs:
Faulting application name: BlueIris.exe, version: 5.0.0.42, time stamp: 0x5cf14cd8
Faulting module name: mfc140u.dll, version: 14.14.26405.0, time stamp: 0x5ac5ba86
Exception code: 0xc0000005
Fault offset: 0x000000000001325f
Faulting process id: 0x2230
Faulting application start time: 0x01d5188d7e289200
Faulting application path: C:\Program Files\Blue Iris 5\BlueIris.exe
Faulting module path: C:\WINDOWS\SYSTEM32\mfc140u.dll
Report Id: 9d67991a-77b7-4fee-96cf-58ee6f02ca71
Faulting package full name:
Faulting package-relative application ID:
 
I would wait a bit until several updates are released and the bugs ironed out.
 
*UPDATE* I was able to delete the whole registry for BI5 on my workstation and then reinstalled. Now I am able to launch the management console, and launch the remote stream!

I was able to get my BI5 (in service mode) down to about 30% CPU usage. But, when i connect the remote management the servers CPU spikes to about 70-80%. Not sure if this is the expectation? or is there a config that allows some of the rendering to get offloaded to the client?
 
You must log in or register to reply here.
Top Bottom