shelestoff
Young grasshopper
Im sorry for stupid question, but who have issue with clicking relay, did you make factory default after upgrade? If not, just do it!
i upload it already, Dahua specs tells that firmware is testedThe Aug firmware i will release on it soon when we get feedback from the volunteers
Dahua engineers sometimes sucked, can't trust them too much.i upload it already, Dahua specs tells that firmware is tested
sometimes.Dahua engineers sometimes sucked, can't trust them too much.
Oh you have the same issue too?!? Glad it’s not a hardware problem then, as I suspected.MakeItRain- Did you still have the clicking from the relay after upgrading to the latest 4.0-1 firmware? I have the same NVR and the same relay cycling issue on 4.0
You clearly think we’re all idiots. Yes, I have factory reset 10 times. I have factory default 10 times. I even used the hardware button to factory reset on the motherboard. Each time it resets, but the clicking relay comes back when it boots.Im sorry for stupid question, but who have issue with clicking relay, did you make factory default after upgrade? If not, just do it!
I didn’t check it, I’ll take a look tonight@MakeItRain
By any chance, did you see the incoming bandwidth issue, on the OSD (camera section) ?
Which isn't always true.i upload it already, Dahua specs tells that firmware is tested
is it possible that it is just a firmware hardcoded display max value of 80Mbps but realistically the hardware can still support 320mbps. What I'm saying is, if you indeed max'd out the bandwidth beyond 80, the value of the remaining will probably just wrap to a minus value, but still keep going, allowing you to run. So its nothing more than a aesthetic bug, not a hard limit.Mine shows Residue Bandwidth / Total Bandwidth as 89 Mbps / 168 Mbps on a NVR5416-16P-4KS2. 9 cameras running.
i have, but anything have to be clearly confirmed.@shelestoff
By any chance, do you have direct access to dahua engineers ? In case, can you tell 'em about the SmartIR issue/bad functioning on the IP cam ? I believe that @EMPIRETECANDY already reported the problem, but maybe, with more pressure ......
Fine SmartIR
Review: Dahua HFW5442T-ASE 4MP Starlight+
For bad SmartIR, on IPC version, every video with a person at 2/3 mt in front of the camera, can show the issue.