Blue Iris motion detections clips not getting captured

[zillah]

Dear folk

I have 3 HiVisionn cameras (DS-2CD2032-I) connected through LAN cables and I am using Blue Iris software and windows 7

I realized two out of 3 HikVision cameras motion detection's clips not getting captured

I tried to compare settings of the one that is working properly to the other two but I couldn't figure out the culprit ?

Thanks

 

[fenderman]

Dear folk

I have 3 HiVisionn cameras (DS-2CD2032-I) connected through LAN cables and I am using Blue Iris software and windows 7

I realized two out of 3 HikVision cameras motion detection's clips not getting captured

I tried to compare settings of the one that is working properly to the other two but I couldn't figure out the culprit ?

Thanks

you will have to post your settings BOTH for blue iris motion and recording AND your cameras video settings.

 

[zillah]

No problem fenderman

 

[zillah]

Camera 1 not working



Camera 2 not working



Camera 3 working one

 

[SouthernYankee]

Please post screen shots directly to the forum. Can not see the screen shots for the crap app.

 

[fenderman]

Camera 1 not working



Camera 2 not working



Camera 3 working one

you have not posted the actual motion detection settings.
Match the iframe interval to the fps in the camera settings
What is happening? are you completely missing the event?

 

[zillah]

Please post screen shots directly to the forum.

Sorry here are the photos

 

[zillah]

Match the iframe interval to the fps in the camera settings

This is for the one that i have no problem and the other two are same settings to this one ,,,,,Do I need to change other two ?

What is happening? are you completely missing the event?

I am missing the clips means those 2 cameras won't capture events

 

[zillah]

you have not posted the actual motion detection settings.

I couldn't see such an option in the link below within my blue Iris
https://cdn.reolink.com/images/faqs/onvif-software/enable-motion-sensor-blueiris.png

The one that i found are those

 

[fenderman]

I couldn't see such an option in the link below within my blue Iris
https://cdn.reolink.com/images/faqs/onvif-software/enable-motion-sensor-blueiris.png

The one that i found are those

Lower the minimum size and make time.
If that doesnt work. Delete the cameras from blue iris and start again. Even with these pics we cannot see your zones.

 

[Mike]

Do your clips read 0 seconds? If so this is due to hardware acceleration not working properly. Disable HA globally or on said cameras, but only if the clip time is 0 seconds.

 

[zillah]

Thanks fenderman

Lower the minimum size and make time.If that doesn't work.

Didn't work

Delete the cameras from blue iris and start again.

I had done that but still no joy

Do your clips read 0 seconds?

Thanks Mike
This is what I have got only for one Camera other two showing nothing