Blue iris not recording

[adehaan86]

BI is not continuous recording like I have it set to. Not sure really what to check but its not fun.

 

[SouthernYankee]

How long have you been using BI ?

Is that one camera trace ?
What make/model camera ?
Is the camera Wifi or hardwire ?
How is the camera powered ? POE or wall wart ?
Have you looked at the log in the camera ?
Has the BI PC been rebooting ?

 

[crw030]

Can you post the settings for the camera (Camera Properties : "Record" Tab), as well as the schedule configurations ("Gear Icon" > "Schedules" tab)

 

[adehaan86]

crw030 see attached image



Southern yankee


How long have you been using BI ? 2 months about

Is that one camera trace ? I have 3 cameras , 2 set to record no matter what
What make/model camera ? hikvision 4 mp
Is the camera Wifi or hardwire ? POE hard wire
How is the camera powered ? POE or wall wart ? see above
Have you looked at the log in the camera ? see image below
Has the BI PC been rebooting ? see image below. no to answer question

 

[Q™]

Perhaps your Blue Iris Schedule preventing it from recording?

 

[adehaan86]

" data-source="post: 324546" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

Perhaps your Blue Iris Schedule preventing it from recording?

Well I hope and pray it makes it record. I want it to record between my 3 schedules.

Sent from my Pixel 2 XL using Tapatalk

 

[SouthernYankee]

I do not think it is scheduling as the record holes are at different time on the two days in the view.

wrong log file, on a Hikvision camera
login to the camera directly. Configuration tab -> system -> maintenance -> log

a screen shot of the BI status clip storage ?

 

[adehaan86]

Sorry for bad picture.

Sent from my Pixel 2 XL using Tapatalk

 

[SouthernYankee]

Look at the log for errors or problems. The screen shot is only 19 seconds long.

A screen shot of the bi status for clip storage. That is a tab off of the bi button with the three vertical bars.

What / how are you switching profiles

 

[adehaan86]

Look at the log for errors or problems. The screen shot is only 19 seconds long.

A screen shot of the bi status for clip storage. That is a tab off of the bi button with the three vertical bars.

I checked the log. Said the same thing 79 times over and over again.

Sent from my Pixel 2 XL using Tapatalk

 

[SouthernYankee]

on the camera status page in BI does it show "no signal" ?

need the clip storage screen shot.

 

[adehaan86]

It never shows no signal.

 

[adehaan86]

Here is the BI log



Schedule

 

[adehaan86]

The concern here is do I want to go larger on the combine or cut video each?

 

[crw030]

I feel like that "Signal Restored" on object LR with a count # of 3538 could be an indicator. You said you have been using BI for 2 months, and even with auto maintain (i.e. reboot) setup on the camera that wouldn't typically be that high. If it was "dropping out" 50 times a day that could explain that graph you were showing and that high #.

Are you sure the spotty video recording is on the Hikvision Front camera, meaning had you clicked it before showing the timeline? I feel like I would want to investigate the "LR" camera, whichever one that is, possibly for some type of wiring issue/power problem.

Also someone else reported logs full of those messages here: Hikvision log showing "Remote: Get Parameters" every 3 seconds???? with a Hikvision 2142 they bought off Amazon. You said you suspect the Hikvision 4MP camera, is it by chance a 2142? Depending whether you have the cameras on their own network/VLAN or not, and any firewall ports forwarded, you might want to look into whether they have been hacked (just as a general precaution).

 

[adehaan86]

Sadly, I did get mine off of amazon so I dont think its a real hikvision even though it says it.

My LR camera only records when it sees motion. my other 2 record continuous.

 

[looney2ns]

The concern here is do I want to go larger on the combine or cut video each?

View attachment 37445

ONe thing, you have Combine cut to 3hrs, yet also have it set to limit the file to 1gb. The 1gb is over riding the 3hrs.
Change the size to 10gb from 1gb.

See these: Blue Iris Video Tutorials

 

[adehaan86]

I will try this now. i am moving all clips off drives, rebuild DB. start service.

 

[SouthernYankee]

I use 1 hour for combine and cut on continuous recording with a file size of 4 GB. All files arer 1 hour long and under 1.5GB. 15 FPS, iframe 15, 1920x1080.

 

[SouthernYankee]

adehann86
are you still getting gaps in the recordings today ?
after the changes in the combine and cut, let it run for 24 hours and see if you get gaps.
Report back.