Hi everyone, I have decided to upgrade my Blue Iris Release 5.3.7.0 x64 system once again after have using it for many years. Purchased qty 9 new Annke C800 4K camera's to replace some aging 2MP camears. Had to built a new system with the I9-10850, 32G Mem, 1TB M.2 for db & 12TB WD Purple HD for file storage to support the new camera's. Didn't have any luck selecting the Camera "Make" Annke from the drop down, so I let Blue Iris use Find/inspect and the camera's where selected at Generic/ONVIF. All camera's are working as expected with very good video quality @ 15fps, video quality set to "Highest". CPU running < 50%.
Could use some help in taking advantage of the RTSP Sub Stream to further reduce the CPU usage, just can't figure out the correct syntax. Would also like to take advantage of the H265+ if possible to avoid adding multiple 12TB HD for file storage.
Best Regards,
Dave


Could use some help in taking advantage of the RTSP Sub Stream to further reduce the CPU usage, just can't figure out the correct syntax. Would also like to take advantage of the H265+ if possible to avoid adding multiple 12TB HD for file storage.
Best Regards,
Dave

