Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

[ldasilva]

shutter speed1/25

shutter speed1/1

 

[nayr]

try 1/3

 

[ldasilva]

weird i cant get it dark again it looks like day light again

 

[wxman]

On that example, the 1/1 is much darker than the 1/25....It may require sitting for a minute for the 1/1 to fully activate.

 

[ldasilva]

shutter speed1/3.jpg
i have to much street lighting

 

[wxman]

That looks more reasonable for a 1/3...I think it's just taking it a minute to adjust the exposure...If you try it back to 1/1 and let it sit for 1 to 2 minutes, it will probably go even lighter than this

 

[ldasilva]

shutter speed1/3

 

[ldasilva]

shutter speed1/1.b

 

[wxman]

Sad part is this only works when there's no motion. If a person walked through the screen, they'd just show up as a long streak. How awesome it would be if that brightness and clarity could be achieved at faster shutter using aperture and ISO/Gain.

 

[ldasilva]

backlight BLC mode

 

[ldasilva]

backlight HLC mode
set at 50

 

[ldasilva]

backlight WDR mode
set at 50

 

[ldasilva]

testing
blue iris shows up with about 995kB/s
when running at
frame rate 25
bit rate CBR 8192
encode mode H.264

 

[phydeaux]

All this eye candy is messing with my budget.
Om the good side it's answering a lot of Questions

 

[ldasilva]

i must say dahua did a great job on this camera

 

[hmjgriffon]

shutter speed1/1.b
View attachment 13956

Can't remember if you are using Blue Iris, were you able to get ptz controls to work?

 

[ldasilva]

Can't remember if you are using Blue Iris, were you able to get ptz controls to work?

Yes blue iris
And yes ptz works

 

[ldasilva]

There's only like 2 option s for dahua one should work in the ptz tab

 

[hmjgriffon]

None of those work, I also notice in BI when sending 15fps in the general box I get the yellow circle but if I send a higher one it's not there, not sure if it's telling me it's angry or not.

Sent from my Nexus 6P using Tapatalk

 

[hmjgriffon]

Yes blue iris
And yes ptz works

Which option are you using?