Hi everyone
I have Dahua NVR4104-P-4kS2 with 3 XM IP cameras, connected to NVR POE ports. They supported ONVIF 2.4.1.
My laptop (192.168.1.11) connected to NVR LAN port (192.168.1.108). Cameras have IP 192.168.1.111-113 (connected to POE 1-3).
NVR has HDD (WD Purple), that was formatted from NVR.
When I've logged to NVR (via Web service or SmartPSS 2.02) - all is ok. I've registered cameras (ONVIF, port 8899).
Set recording main stream to auto, schedule is regular 24/7.
All is OK, until I logged in NVR from my laptop. I can playback recorded streams from all 3 cameras. I can download that files to laptop. I can preview cameras with no problems.
BUT
When I close SmartPSS (or IE with Web service) - no recordings at all.
Until I log in NVR again.
I've tried last firmware (3.216 from dahuasecurity.com), factory reset, default settings.
Date and time - are OK too/ When I log out, and log in after some time - time is OK.
I have Dahua NVR4104-P-4kS2 with 3 XM IP cameras, connected to NVR POE ports. They supported ONVIF 2.4.1.
My laptop (192.168.1.11) connected to NVR LAN port (192.168.1.108). Cameras have IP 192.168.1.111-113 (connected to POE 1-3).
NVR has HDD (WD Purple), that was formatted from NVR.
When I've logged to NVR (via Web service or SmartPSS 2.02) - all is ok. I've registered cameras (ONVIF, port 8899).
Set recording main stream to auto, schedule is regular 24/7.
All is OK, until I logged in NVR from my laptop. I can playback recorded streams from all 3 cameras. I can download that files to laptop. I can preview cameras with no problems.
BUT
When I close SmartPSS (or IE with Web service) - no recordings at all.
Until I log in NVR again.
I've tried last firmware (3.216 from dahuasecurity.com), factory reset, default settings.
Date and time - are OK too/ When I log out, and log in after some time - time is OK.