nayr
IPCT Contributor
My NVR just saves whatever the camera sends it via RTSP; there are no settings on the NVR.. it takes whatever I put into the camera, I'm recording main stream.
My NVR just saves whatever the camera sends it via RTSP; there are no settings on the NVR.. it takes whatever I put into the camera, I'm recording main stream.
Where do you have to setup IVS tripwire and tracking NVR or WebUI?
There is an issue at present which doesn't allow you to setup IVS on the NVR or WebUI. Recommended way is to go into each camera and set up your rules there, then go into your NVR and configure it to record smart events.
The dropped frames aren't tied directly to IVS triggers. I say thing because the same thing happens to me on a hardwired external trigger. I think the firmware is messing up when it closes the old file and opens a new one on a trigger. If I'm right, the lost frames should happen on motion events, too.
Three reboots today that I can't explain, all with "Reboot Symbol: 0x06f". Not having any luck with Google figuring out what that means.
View attachment 16620
Where is the smart events option of the NVR?
Been lurking for a while now, set up an account because this forum is awesome, and i'm going to purchase the same nvr + external poe per advice... I have a question for you guys with this setup.. On those HDW4421C Eyeball cams with the mic built in, will this NVR also record the audio from them?
Thanks!
Been lurking for a while now, set up an account because this forum is awesome, and i'm going to purchase the same nvr + external poe per advice... I have a question for you guys with this setup.. On those HDW4421C Eyeball cams with the mic built in, will this NVR also record the audio from them?
Thanks!
On the cameras themselves, do you have the "record" box checked on the Motion and IVS sections?
On the camera, in Storage > Schedules (that's from memory, hopefully correct), are Motion and IVS setup there 24/7 (like how they're setup on the NVR in the pic you posted above)?Yes record button is checked.
On the camera, in Storage > Schedules (that's from memory, hopefully correct), are Motion and IVS setup there 24/7 (like how they're setup on the NVR in the pic you posted above)?