DH-SD22204T-GN white screen

P

parsec

n3wb
Nov 11, 2018
10
4
USA
Hello to all
I have DH-SD22204T-GN and I have to 2 issues with it
1 it drops off line all the time even when it was connected to my PC network only the camera and the PC
were connected

2 when on line I see only a white screen

Does some one have any ideas as to what is happening
thank you

John
 
parsec said:
Hello to all
I have DH-SD22204T-GN and I have to 2 issues with it
1 it drops off line all the time even when it was connected to my PC network only the camera and the PC
were connected

2 when on line I see only a white screen

Does some one have any ideas as to what is happening
thank you

John
Click to expand...
Take it down and test with a short premade cable.
Did you use the 568 standard? did you use solid copper cable not CCA/copper clad aluminium.
 
I am testing with a 3 feet cable solid copper yes on the 568. No Luck I get a white screen and keeps drooping off
thank you
 
Do a hard reset on the camera.
Clean the dome and the lens.
Where did you buy the camera, web site or vendor name ?
 
SouthernYankee said:
Do a hard reset on the camera.
Clean the dome and the lens.
Where did you buy the camera, web site or vendor name ?
Click to expand...


"Do a hard reset on the camera." I have done a factory reset
Clean the dome and the lens. " same issue with no dome"
Where did you buy the camera, web site or vendor name " not available at this time ebay"
 
  • Like
Reactions: SouthernYankee
You have a chinese camera that may be a fake. I think you are SOL
 
quite possible
I have worked with other models and if this is the case it looks and feels the real deal of a product, it has the right
weight and good workmanship
I run out of ideas how to make it work that is why I post here, I guess I am out of options.
and it is to light for a door stop.
Thank you all
 
I did "12v with at least 1.5A." I get it to work for few minutes then drops off then at random times comes back on
line
thank you
 
You must log in or register to reply here.
Top Bottom