firmware 5.4.0 for R6 anyone tried?

badmannen

Getting the hang of it
Joined
Nov 24, 2015
Messages
506
Reaction score
29
Location
Italy
Downgrade and wait for the next version

Sent from my A0001 using Tapatalk
 

DarkSim

Young grasshopper
Joined
Sep 30, 2014
Messages
50
Reaction score
2
I thought it was impossible to downgrade from 5.4.0?
 

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Hi guys, this is my first post on this forum and i really wish someone can help with the problem i seem to have after upgrading my DS-2CD2342WD-I camera's from firmware 5.3.8. to this latest version 5.4.0.
I cannot set my camera's to anything higher than 1920x1080P. This morning while i was still on 5.3.8. i had normal 4MP resolution. It seems to have downgraded my resolution to 2MP instead of 4MP.

I added a screenshot from 1 of my cams. 1920x1080P is the highest i can choose from the dropdown menu. Sorry it's in Dutch.

2MP.JPGcaminfo.JPG

Anyone who can shed some light in this matter? I seem to be stuck with 2MP camera's now ;-((

All help will be highly appreciated.

Regards, Frank
 
Last edited by a moderator:

Kroegtijgertje

Getting the hang of it
Joined
Nov 10, 2015
Messages
119
Reaction score
20
Hi guys, this is my first post on this forum and i really wish someone can help with the problem i seem to have after upgrading my DS-2CD2342WD-I camera's from firmware 5.3.8. to this latest version 5.4.0.
I cannot set my camera's to anything higher than 1920x1080P. This morning while i was still on 5.3.8. i had normal 4MP resolution. It seems to have downgraded my resolution to 2MP instead of 4MP.

I added a screenshot from 1 of my cams. 1920x1080P is the highest i can choose from the dropdown menu. Sorry it's in Dutch.

View attachment 12247View attachment 12248

Anyone who can shed some light in this matter? I seem to be stuck with 2MP camera's now ;-((

All help will be highly appreciated.

Regards, Frank
Hey Frank,

Check this setting:

hiksetup.jpg
 

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Mine is set to PAL, but on high resolution

capture.JPG

But my resoultion is still only 1920x1080. Before i could choose also ro set it to 4MP.
 
Last edited by a moderator:

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Kroegtijgertje, i changed the capture to below setting and now i can change my resolution all the way up to 2688x1520. So this is the correct setting.

capture2.JPG

Thanks so much for your help! This really makes a difference and i'm having my 4MP back again ;-)

Regards, Frank
 
Last edited by a moderator:

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Hi guys, i'm back again with an issue with the 5.4.0. firmware. My picture quality during nightime (no IR) has changed dramatically (and i mean that in the worst possible negative way) since the upgrade to 5.4.0. With 5.3.8. i had considerable better night video than now. So i think i wish to go back to 5.3.8.

Did anyone do this downgrade already?

Below some screenshots from before (with 5.3.8. from 29/30 july) and after (with 5.4.0. from 31 july until now). I added both camera's

192.168.1.200_01_20160802011039452.jpg192.168.1.200_02_20160802011452950.jpg192.168.1.200_01_20160802011113946.jpg192.168.1.200_02_20160802011505807.jpg192.168.1.200_01_20160802011143902.jpg192.168.1.200_02_20160802011535630.jpgView attachment 192.168.1.200_02_2016080201151861.jpg
 
Last edited by a moderator:
Joined
Apr 21, 2016
Messages
11
Reaction score
0
I use H264+ and quality with 5.4.0 on R6 is much worse then with 5.3.8 .. I want downgrade too. On board is thread firmware downgrade for R0 series, but it does notr work on R6.
 

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Hi guys, i'm back again with an issue with the 5.4.0. firmware. My picture quality during nightime (no IR) has changed dramatically (and i mean that in the worst possible negative way) since the upgrade to 5.4.0. With 5.3.8. i had considerable better night video than now. So i think i wish to go back to 5.3.8.

Did anyone do this downgrade already?

Below some screenshots from before (with 5.3.8. from 29/30 july) and after (with 5.4.0. from 31 july until now). I added both camera's

View attachment 12256View attachment 12260View attachment 12257View attachment 12261View attachment 12258View attachment 12262View attachment 12259
I read from many users that they are happy with 5.4.0 firmware on their R6 model. How can it be that i am experiencing this degradation of picture quality during low light conditions? Are you guys using different settings? Can anyone (for instance Kroegtijgertje) confirm which settings to use? I am really stuck looking for clues here.
 

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Hey badmanne, After spending a few hours messing around with the expert DNR settings I concur with your findings.

Also, after a bit more testing we have found v5.4.0 to probably be the best firmware for the R6 4MP Cameras as long as you don't need H.264+.
I am curious as to what made you change your opinion. First i read that you're experiencing more noice and artifacts in 5.4.0. than with 5.3.8, but now you probably changed settings to make it better picture quality. What changes did you do?
 

Kroegtijgertje

Getting the hang of it
Joined
Nov 10, 2015
Messages
119
Reaction score
20
@Frank van der Heide, I'm using IR at night.

My settings are:

Resolution: 2688x1520 (main stream)
Bitrate type: constant
Video quality: highest
frame rate: 20 fps
Max bitrate: 16384
Video encoding: H.264 (only option)
H.264+: OFF
Profile: Main Profile (only option)
I Frame Interval: 20
Smoothing: 20


Brightness: 50
Contrast: 40
Saturation: 50
Sharpness: 50

Day/Night Switch: Auto
Sensitivity: 6
Smart Suplement Light: On (Smart IR)
Mode: Auto

Shutterspeed: 1/30
Gain: 70 (this is very personal based on available light)
White Balance: Natural

Digital Noise Reduction: Expert

Space DNR Level: 15
Time DNR Level: 30

BLC Area: OFF
WDR: OFF
 
Last edited by a moderator:

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
Thanks @Kroegtijgertje, i tried all your settings but still my picture quality is extremely bad. I will adress this issue also to Hikvision, since my cams are only 4 days old and now already a big disappointment. The first two days i was still at 5.3.8. firmware and i had good quality even in low light condition. But now the cams are virtually useless at night.
 
Last edited by a moderator:

Frank van der Heide

Pulling my weight
Joined
Jul 24, 2016
Messages
291
Reaction score
104
Location
the Netherlands
I uploaded some footage with different settings to youtube. Comments? The settings that i changed are mostly exposure (25 = 1/25, 50 = 1/50) and DNR (normal and expert mode). I was not able yet to see how it effects moving objects.

Comments anyone?

Hikvision DS-2CD2342WD-I firmware 5.4.0.


settings: exposure 25 gain 80 dnr expert space 15 time 30


settings: exposure 25 gain 80 dnr expert space 15 time 50


settings: exposure 25 gain 80 dnr expert space 15 time 50


settings: exposure 25 gain 80 dnr expert space 40 time 50


settings: exposure 25 gain 80 dnr normal 30


settings: exposure 50 gain 80 dnr normal 30
 

Paul Arthur

Getting the hang of it
Joined
Apr 30, 2016
Messages
216
Reaction score
15
camera came with 5.4.0 and it's shitting me off now i see the problems

10.0.0.102_01_20160813104842630.jpg
 

DarkSim

Young grasshopper
Joined
Sep 30, 2014
Messages
50
Reaction score
2
I noticed my line crossing is working when the resolution is set to 1080P, and not working in full 4MP with 5.4.0 firmware...
 

badmannen

Getting the hang of it
Joined
Nov 24, 2015
Messages
506
Reaction score
29
Location
Italy
Try to redraw the line after switching to 4mp

Sent from my A0001 using Tapatalk
 

WiSE

n3wb
Joined
Sep 7, 2016
Messages
16
Reaction score
0
Location
The Netherlands
Dear all,

I noticed a lot of people whom are positive about the 5.4 update, but also some people are not.
The problem I'm currently facing is that my motion detection pictures are no longer emailed from and to my GMail account.

Does anyone faced the same problems? Or maybe even someone has the solution?

Thanks in advance for any help!

Grtzz WiSE
 
Top