Hey,
This is my first post.
I was using zone minder for years but recently gave up on it as it was just too awkward to use and maintain.
I purchased a Dahua NVR NVR4108-8P-4KS2/L as all my cameras are Dahua. After connecting them up and going about setting them up things like trip wires I get the error "operation failed".
I assumed that it would be the NVR that would be doing the monitoring and the cameras were just sending the feed to the NVR but from what i found online that does not appear to be the case as the NVR can only do something like tripwire if the camera supports it. Now the thing here is the camera does support it and I had it set up on the camera before but its a pain in the ass to do on the camera as I need internet explorer to do it and I only have linux machines and spinning up VM to do this is a pain. I assumed the firmware was responsible for the NVR not being able to do things like tripwires on the camera but can not find firmware to install.
IPC-HDW4631C-A - front - this works with tripwire on NVR - System Version 2.622.0000000.23.R, Build Date: 2018-11-10, WEB Version 3.2.1.561950, ONVIF Version 16.12(V2.4.1.513183)
IPC-HDW4431C-A-V2 - side - this does not work with tripwire on NVR - Software Version 2.420.0000.21.R, Build Date: 2016-07-24, WEB Version 3.2.1.364036, ONVIF Version 2.42
IPC-HDW4431C-A - back - this does not work with tripwire on NVR - Software Version 2.420.0000.21.R, Build Date: 2016-07-24, WEB Version 3.2.1.364036, ONVIF Version 2.42
DH-SD22404T-GN - ptz - this works with tripwire on NVR - System Version 2.623.0000000.7.R.R4.495, Build Date: 2018-11-24, WEB Version 3.2.1.662493, ONVIF Version 16.12(V2.4.3.580229)
All camera where bought from Aliexpress and were suppose to have english firmwares .
Can anyone advise where I can get more recent firmware for the IPC-HDW4431C model cameras or does anyone have any other suggestions to set up trip wires on those camera from the NVR or from the Dahua gDMSS app?
Thanks for any responses or advise.
This is my first post.
I was using zone minder for years but recently gave up on it as it was just too awkward to use and maintain.
I purchased a Dahua NVR NVR4108-8P-4KS2/L as all my cameras are Dahua. After connecting them up and going about setting them up things like trip wires I get the error "operation failed".
I assumed that it would be the NVR that would be doing the monitoring and the cameras were just sending the feed to the NVR but from what i found online that does not appear to be the case as the NVR can only do something like tripwire if the camera supports it. Now the thing here is the camera does support it and I had it set up on the camera before but its a pain in the ass to do on the camera as I need internet explorer to do it and I only have linux machines and spinning up VM to do this is a pain. I assumed the firmware was responsible for the NVR not being able to do things like tripwires on the camera but can not find firmware to install.
IPC-HDW4631C-A - front - this works with tripwire on NVR - System Version 2.622.0000000.23.R, Build Date: 2018-11-10, WEB Version 3.2.1.561950, ONVIF Version 16.12(V2.4.1.513183)
IPC-HDW4431C-A-V2 - side - this does not work with tripwire on NVR - Software Version 2.420.0000.21.R, Build Date: 2016-07-24, WEB Version 3.2.1.364036, ONVIF Version 2.42
IPC-HDW4431C-A - back - this does not work with tripwire on NVR - Software Version 2.420.0000.21.R, Build Date: 2016-07-24, WEB Version 3.2.1.364036, ONVIF Version 2.42
DH-SD22404T-GN - ptz - this works with tripwire on NVR - System Version 2.623.0000000.7.R.R4.495, Build Date: 2018-11-24, WEB Version 3.2.1.662493, ONVIF Version 16.12(V2.4.3.580229)
All camera where bought from Aliexpress and were suppose to have english firmwares .
Can anyone advise where I can get more recent firmware for the IPC-HDW4431C model cameras or does anyone have any other suggestions to set up trip wires on those camera from the NVR or from the Dahua gDMSS app?
Thanks for any responses or advise.