Hikvision DS-KD8003-IME - New video doorbell

hi everyone, do you know how can I control the second relay on main door station (DS-KD8003-IME1) ? From iVMS4200 I can set 3 passwords but all these passwords controls the first relay on main door station.
Also I do not see in the iVMS4200 any option to associate a PIN/password for first relay (door) and a different one for second relay (door)
 
hi everyone, do you know how can I control the second relay on main door station (DS-KD8003-IME1) ? From iVMS4200 I can set 3 passwords but all these passwords controls the first relay on main door station.
Also I do not see in the iVMS4200 any option to associate a PIN/password for first relay (door) and a different one for second relay (door)

Perhaps you could post this question at HikVision. Admins there have been very helpful.
 
However, anything over 10Mb when attempting to live view will result in an initial still frame, if not after some delay, and another every 30+ seconds or at some random interval.
Yay for quoting myself.

They've responded, simply saying...

"We recommend you keep default bitrate setting, otherwise It may cause freeze issue."

Though it's not directly answering the question, there you have it.
 
I assume the softphones are on the same network, and potentially the same network as the PBX? Is the doorbell on the same network as the PBX/phones or did you split it off? I'd expect that behavior if you have them on different VLANs and there are some restrictions in place.
Yes, everything is on the same network
 
Interesting. I would assume (and hope) that the SIP server would have some semblance of logs that would shed some light into the issue. Without those, I can’t say what may be happening then in that case.
 
Interesting. I would assume (and hope) that the SIP server would have some semblance of logs that would shed some light into the issue. Without those, I can’t say what may be happening then in that case.
Here is the log. Pushed the button on 12:48, and picked up with softphone couple of seconds later. In the softphone I looked like it connected, but no sound or video. The doorbell on the other hand keeps ringing. Doorbell timed out one minute later.

[2020-01-22 11:48:00] VERBOSE[30696] pbx_variables.c: Setting global variable 'SIPDOMAIN' to '192.168.1.143'
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio TOS bits 184
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio CoS mark 5
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video TOS bits 136
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video TOS bits 136 in TCLASS field.
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video CoS mark 4
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [201@from-internal:1] GotoIf("PJSIP/100-00000004", "1?ext-local,201,1:followme-check,201,1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (ext-local,201,1)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [201@ext-local:1] Set("PJSIP/100-00000004", "__RINGTIMER=15") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [201@ext-local:2] Macro("PJSIP/100-00000004", "exten-vm,novm,201,0,0,0") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:1] Macro("PJSIP/100-00000004", "user-callerid,") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:1] Set("PJSIP/100-00000004", "TOUCH_MONITOR=1579693680.4") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:2] Set("PJSIP/100-00000004", "AMPUSER=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:3] GotoIf("PJSIP/100-00000004", "0?report") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:4] ExecIf("PJSIP/100-00000004", "1?Set(REALCALLERIDNUM=100)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:5] Set("PJSIP/100-00000004", "AMPUSER=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:6] GotoIf("PJSIP/100-00000004", "0?limit") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:7] Set("PJSIP/100-00000004", "AMPUSERCIDNAME=Doorbell") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:8] ExecIf("PJSIP/100-00000004", "0?Set(__CIDMASQUERADING=TRUE)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:9] GotoIf("PJSIP/100-00000004", "0?report") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:10] Set("PJSIP/100-00000004", "AMPUSERCID=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:11] Set("PJSIP/100-00000004", "__DIAL_OPTIONS=HhTtr") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:12] Set("PJSIP/100-00000004", "CALLERID(all)="Doorbell" <100>") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:13] ExecIf("PJSIP/100-00000004", "0?Set(CALLERID(all)=201)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:14] GotoIf("PJSIP/100-00000004", "0?limit") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:15] ExecIf("PJSIP/100-00000004", "0?Set(GROUP(concurrency_limit)=100)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:16] ExecIf("PJSIP/100-00000004", "0?Set(CHANNEL(language)=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:17] NoOp("PJSIP/100-00000004", "Macro Depth is 2") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:18] GotoIf("PJSIP/100-00000004", "1?report2:macroerror") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-user-callerid,s,19)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:19] GotoIf("PJSIP/100-00000004", "0?continue") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:20] ExecIf("PJSIP/100-00000004", "1?Set(__CALLEE_ACCOUNCODE=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:21] Set("PJSIP/100-00000004", "__TTL=64") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:22] GotoIf("PJSIP/100-00000004", "1?continue") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-user-callerid,s,38)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:38] Set("PJSIP/100-00000004", "CALLERID(number)=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:39] Set("PJSIP/100-00000004", "CALLERID(name)=Doorbell") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:40] GotoIf("PJSIP/100-00000004", "0?cnum") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:41] Set("PJSIP/100-00000004", "CDR(cnam)=Doorbell") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:42] Set("PJSIP/100-00000004", "CDR(cnum)=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-user-callerid:43] Set("PJSIP/100-00000004", "CHANNEL(language)=en") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:2] Set("PJSIP/100-00000004", "RingGroupMethod=none") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:3] Set("PJSIP/100-00000004", "__EXTTOCALL=201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:4] Set("PJSIP/100-00000004", "__PICKUPMARK=201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:5] Set("PJSIP/100-00000004", "RT=") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:6] ExecIf("PJSIP/100-00000004", "0?Macro(vm,novm,DIRECTDIAL,)") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:7] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:8] ExecIf("PJSIP/100-00000004", "0?Gosub(ext-intercom,*80201,1())") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:9] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:10] ExecIf("PJSIP/100-00000004", "0?ChanSpy(PJSIP/201,q)") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:11] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] WARNING[797][C-00000003] chan_sip.c: This function can only be used on SIP channels.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:12] ExecIf("PJSIP/100-00000004", "0?Macro(vm,novm,DIRECTDIAL,)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:13] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:14] ExecIf("PJSIP/100-00000004", "0?Gosub(ext-intercom,*80201,1())") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:15] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:16] ExecIf("PJSIP/100-00000004", "0?ChanSpy(PJSIP/201,q)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:17] ExecIf("PJSIP/100-00000004", "0?MacroExit()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:18] Gosub("PJSIP/100-00000004", "sub-record-check,s,1(exten,201,dontcare)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:1] GotoIf("PJSIP/100-00000004", "0?initialized") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:2] Set("PJSIP/100-00000004", "__REC_STATUS=INITIALIZED") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:3] Set("PJSIP/100-00000004", "NOW=1579693680") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:4] Set("PJSIP/100-00000004", "__DAY=22") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:5] Set("PJSIP/100-00000004", "__MONTH=01") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:6] Set("PJSIP/100-00000004", "__YEAR=2020") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:7] Set("PJSIP/100-00000004", "__TIMESTR=20200122-114800") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:8] Set("PJSIP/100-00000004", "__FROMEXTEN=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:9] Set("PJSIP/100-00000004", "__MON_FMT=wav") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:10] NoOp("PJSIP/100-00000004", "Recordings initialized") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:11] ExecIf("PJSIP/100-00000004", "0?Set(ARG3=dontcare)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:12] Set("PJSIP/100-00000004", "REC_POLICY_MODE_SAVE=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:13] ExecIf("PJSIP/100-00000004", "0?Set(REC_STATUS=NO)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:14] GotoIf("PJSIP/100-00000004", "5?checkaction") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (sub-record-check,s,17)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-record-check:17] GotoIf("PJSIP/100-00000004", "1?sub-record-check,exten,1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:1] NoOp("PJSIP/100-00000004", "Exten Recording Check between 100 and 201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:2] Set("PJSIP/100-00000004", "CALLTYPE=internal") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:3] ExecIf("PJSIP/100-00000004", "0?Set(CALLTYPE=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:4] Set("PJSIP/100-00000004", "CALLEE=dontcare") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:5] ExecIf("PJSIP/100-00000004", "0?Set(CALLEE=dontcare)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:6] GotoIf("PJSIP/100-00000004", "0?callee") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:7] GotoIf("PJSIP/100-00000004", "1?caller") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:13] Set("PJSIP/100-00000004", "RECMODE=dontcare") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:14] ExecIf("PJSIP/100-00000004", "0?Set(RECMODE=dontcare)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:15] ExecIf("PJSIP/100-00000004", "1?Set(RECMODE=dontcare)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:16] Gosub("PJSIP/100-00000004", "recordcheck,1(dontcare,internal,201)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp("PJSIP/100-00000004", "Starting recording check against dontcare") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [recordcheck@sub-record-check:2] Goto("PJSIP/100-00000004", "dontcare") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [recordcheck@sub-record-check:3] Return("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [exten@sub-record-check:17] Return("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:19] GotoIf("PJSIP/100-00000004", "1?macrodial") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-exten-vm,s,25)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:25] GosubIf("PJSIP/100-00000004", "0?clrheader,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-exten-vm:26] Macro("PJSIP/100-00000004", "dial-one,,HhTtr,201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:1] Set("PJSIP/100-00000004", "DEXTEN=201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:2] ExecIf("PJSIP/100-00000004", "0?Set(__EXTTOCALL=201)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:3] Set("PJSIP/100-00000004", "DIALSTATUS_CW=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:4] GosubIf("PJSIP/100-00000004", "0?screen,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:5] GosubIf("PJSIP/100-00000004", "0?cf,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:6] GotoIf("PJSIP/100-00000004", "1?skip1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-dial-one,s,9)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:9] GotoIf("PJSIP/100-00000004", "0?nodial") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:10] GotoIf("PJSIP/100-00000004", "0?continue") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:11] Set("PJSIP/100-00000004", "EXTHASCW=ENABLED") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:12] GotoIf("PJSIP/100-00000004", "0?next1:cwinusebusy") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-dial-one,s,24)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:24] GotoIf("PJSIP/100-00000004", "0?next3:continue") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-dial-one,s,26)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:26] GotoIf("PJSIP/100-00000004", "0?nodial") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:27] GosubIf("PJSIP/100-00000004", "1?dstring,1():dlocal,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:1] Set("PJSIP/100-00000004", "DSTRING=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:2] Set("PJSIP/100-00000004", "DEVICES=201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf("PJSIP/100-00000004", "0?Return()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf("PJSIP/100-00000004", "0?Set(DEVICES=01)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:5] Set("PJSIP/100-00000004", "LOOPCNT=1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:6] Set("PJSIP/100-00000004", "ITER=1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:7] Set("PJSIP/100-00000004", "THISDIAL=PJSIP/201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:8] GotoIf("PJSIP/100-00000004", "0?docheck") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:9] NoOp("PJSIP/100-00000004", "Debug: Found PJSIP Destination PJSIP/201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:10] GotoIf("PJSIP/100-00000004", "0?doset") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:11] NoOp("PJSIP/100-00000004", "Debug: Updating PJSIP Destination with PJSIP_DIAL_CONTACTS") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:12] Set("PJSIP/100-00000004", "THISDIAL=PJSIP/201/sip:201@192.168.1.20:54424;ob") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:13] ExecIf("PJSIP/100-00000004", "0?Set(DIALSTATUS=CHANUNAVAIL)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:14] GotoIf("PJSIP/100-00000004", "0?skipset") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:15] Set("PJSIP/100-00000004", "DSTRING=PJSIP/201/sip:201@192.168.1.20:54424;ob&") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:16] Set("PJSIP/100-00000004", "ITER=2") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:17] GotoIf("PJSIP/100-00000004", "0?begin") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:18] ExecIf("PJSIP/100-00000004", "0?Return()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:19] Set("PJSIP/100-00000004", "DSTRING=PJSIP/201/sip:201@192.168.1.20:54424;ob") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [dstring@macro-dial-one:20] Return("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:28] GotoIf("PJSIP/100-00000004", "0?nodial") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:29] GotoIf("PJSIP/100-00000004", "0?skiptrace") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:30] GosubIf("PJSIP/100-00000004", "1?ctset,1():ctclear,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [ctset@macro-dial-one:1] Set("PJSIP/100-00000004", "DB(CALLTRACE/201)=100") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [ctset@macro-dial-one:2] Return("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:31] Set("PJSIP/100-00000004", "D_OPTIONS=HhTtr") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:32] GosubIf("PJSIP/100-00000004", "0?func-set-sipheader,s,1(Alert-Info,)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:33] NoOp("PJSIP/100-00000004", "Blind Transfer: , Attended Transfer: , User: 100, Alert Info: ") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:34] ExecIf("PJSIP/100-00000004", "1?Set(ALERT_INFO=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:35] ExecIf("PJSIP/100-00000004", "0?Set(ALERT_INFO=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:36] ExecIf("PJSIP/100-00000004", "0?Set(ALERT_INFO=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:37] ExecIf("PJSIP/100-00000004", "0?Set(ALERT_INFO=Normal;volume=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:38] ExecIf("PJSIP/100-00000004", "0?Set(ALERT_INFO=Normal;volume=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:39] GosubIf("PJSIP/100-00000004", "0?func-set-sipheader,s,1(Alert-Info,)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:40] ExecIf("PJSIP/100-00000004", "0?Set(CHANNEL(musicclass)=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:41] GosubIf("PJSIP/100-00000004", "0?qwait,1()") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:42] Set("PJSIP/100-00000004", "__CWIGNORE=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:43] Set("PJSIP/100-00000004", "__KEEPCID=TRUE") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:44] GotoIf("PJSIP/100-00000004", "0?usegoto,1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:45] GotoIf("PJSIP/100-00000004", "0?godial") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:46] Gosub("PJSIP/100-00000004", "sub-presencestate-display,s,1(201)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@sub-presencestate-display:1] Goto("PJSIP/100-00000004", "state-not_set,1") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (sub-presencestate-display,state-not_set,1)
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [state-not_set@sub-presencestate-display:1] Set("PJSIP/100-00000004", "PRESENCESTATE_DISPLAY=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [state-not_set@sub-presencestate-display:2] Return("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:47] Set("PJSIP/100-00000004", "CONNECTEDLINE(name,i)=PC") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:48] Set("PJSIP/100-00000004", "CONNECTEDLINE(num)=201") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:49] Set("PJSIP/100-00000004", "D_OPTIONS=HhTtrI") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:50] Macro("PJSIP/100-00000004", "dialout-one-predial-hook,") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dialout-one-predial-hook:1] MacroExit("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:51] ExecIf("PJSIP/100-00000004", "0?Set(D_OPTIONS=HhtrII)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:52] ExecIf("PJSIP/100-00000004", "0?Set(CWRING=r(callwaiting)):Set(CWRING=)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:53] NoOp("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:54] ExecIf("PJSIP/100-00000004", "0?Set(D_OPTIONS=HhTtrIg)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-dial-one:55] Dial("PJSIP/100-00000004", "PJSIP/201/sip:201@192.168.1.20:54424;ob,,HhTtrIb(func-apply-sipheaders^s^1)") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_stack.c: PJSIP/201-00000005 Internal Gosub(func-apply-sipheaders,s,1) start
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@func-apply-sipheaders:1] NoOp("PJSIP/201-00000005", "Applying SIP Headers to channel PJSIP/201-00000005") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@func-apply-sipheaders:2] Set("PJSIP/201-00000005", "TECH=PJSIP") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@func-apply-sipheaders:3] Set("PJSIP/201-00000005", "SIPHEADERKEYS=") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@func-apply-sipheaders:4] While("PJSIP/201-00000005", "0") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_while.c: Jumping to priority 12
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] pbx.c: Executing [s@func-apply-sipheaders:13] Return("PJSIP/201-00000005", "") in new stack
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_stack.c: Spawn extension (from-internal, 201, 1) exited non-zero on 'PJSIP/201-00000005'
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_stack.c: PJSIP/201-00000005 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_dial.c: Called PJSIP/201/sip:201@192.168.1.20:54424;ob
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio TOS bits 184
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Audio CoS mark 5
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video TOS bits 136
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video TOS bits 136 in TCLASS field.
[2020-01-22 11:48:00] VERBOSE[30696] netsock2.c: Using SIP RTP Video CoS mark 4
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_dial.c: Connected line update to PJSIP/100-00000004 prevented.
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_dial.c: PJSIP/201-00000005 is ringing
[2020-01-22 11:48:00] VERBOSE[797][C-00000003] app_dial.c: PJSIP/201-00000005 is ringing
[2020-01-22 11:48:07] VERBOSE[797][C-00000003] app_dial.c: PJSIP/201-00000005 answered PJSIP/100-00000004
[2020-01-22 11:48:07] VERBOSE[883][C-00000003] bridge_channel.c: Channel PJSIP/201-00000005 joined 'simple_bridge' basic-bridge <109f36c3-a302-4934-bc19-2547d3564606>
[2020-01-22 11:48:07] VERBOSE[797][C-00000003] bridge_channel.c: Channel PJSIP/100-00000004 joined 'simple_bridge' basic-bridge <109f36c3-a302-4934-bc19-2547d3564606>
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] bridge_channel.c: Channel PJSIP/100-00000004 left 'simple_bridge' basic-bridge <109f36c3-a302-4934-bc19-2547d3564606>
[2020-01-22 11:49:06] VERBOSE[883][C-00000003] bridge_channel.c: Channel PJSIP/201-00000005 left 'simple_bridge' basic-bridge <109f36c3-a302-4934-bc19-2547d3564606>
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] app_macro.c: Spawn extension (macro-dial-one, s, 55) exited non-zero on 'PJSIP/100-00000004' in macro 'dial-one'
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] app_macro.c: Spawn extension (macro-exten-vm, s, 26) exited non-zero on 'PJSIP/100-00000004' in macro 'exten-vm'
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Spawn extension (ext-local, 201, 2) exited non-zero on 'PJSIP/100-00000004'
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [h@ext-local:1] Macro("PJSIP/100-00000004", "hangupcall,") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-hangupcall:1] GotoIf("PJSIP/100-00000004", "1?theend") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-hangupcall:3] ExecIf("PJSIP/100-00000004", "0?Set(CDR(recordingfile)=)") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-hangupcall:4] NoOp("PJSIP/100-00000004", "PJSIP/201-00000005 montior file= ") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-hangupcall:5] GotoIf("PJSIP/100-00000004", "1?skipagi") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx_builtins.c: Goto (macro-hangupcall,s,7)
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Executing [s@macro-hangupcall:7] Hangup("PJSIP/100-00000004", "") in new stack
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on 'PJSIP/100-00000004' in macro 'hangupcall'
[2020-01-22 11:49:06] VERBOSE[797][C-00000003] pbx.c: Spawn extension (ext-local, h, 1) exited non-zero on 'PJSIP/100-00000004'

It's possible to use ds-kd8003-ime1 only with mobile app without internal station?

No, unless maybe if you set it from Hickvision protocol to SIP protocol like I'm trying. But I'm running in to issues with that, see my previous reply
 
Hi,

It should be possible to see the live view of a IP Camera on the monitor DS-KH6320-WTE2, but it doesn's work for me yet?!

IVMS 4200 > DS-KH6320-WTE2 > IP Camera Information > Edit IP Camera > IP adres IP Camera > Port 554 > no live view?!

Is there a solution for this problem?
 

Attachments

  • Picture 1_LI.jpg
    Picture 1_LI.jpg
    473.3 KB · Views: 48
  • Picture 2.png
    Picture 2.png
    474.2 KB · Views: 39
  • Picture 3.png
    Picture 3.png
    192.8 KB · Views: 28
[QUOTE = "jlikonen, Beitrag: 414667, Mitglied: 89410"]
Das ist ein guter Punkt. Als ich mein DS-KD8003-IME1 vor der Installation getestet habe, konnte ich das 2. Relais nicht zum Laufen bringen.
[/ ZITAT]
Das 2. Schloss muss in IVMS aktiviert werden. Tür 2 ist standardmäßig immer deaktiviert
1580127532089.png
 
[QUOTE = "MBPlayer, Beitrag: 416152, Mitglied: 93366"]
Hallo,

DS-KH6320-WTE2: Es sollte möglich sein, die Live-Ansicht einer IP-Kamera auf dem Monitor zu sehen, aber es funktioniert für mich noch nicht?!

IVMS 4200> DS-KH6320-WTE2> IP-Kamera-Informationen> IP-Kamera bearbeiten> IP-Adresse der IP-Kamera> Port 554> Keine Live-Ansicht?!

Gibt es eine Lösung für dieses Problem?
[/ ZITAT]
Die Kameranummer ist nicht die 88, sondern die 1, wenn Sie direkt an eine IP-Kamera gehen. Sie sollten auch eine HIK-Kamera verwenden, da nicht jeder RTSP-Stream unterstützt wird
1580127765018.png
 
I've just installed a 2nd gen door station + master indoor station + 2 indoor slave stations and I'm struggling to configure it on a Mac via iVMS-4200. This is only a LAN system so do I need to set up a SIP server? And do I need to turn on DHCP if I have a static IP?

The master indoor station is POE wired while the slave stations are operating wirelessly and although I can see and open/close my entrance gate and talk to my visitor from all stations, I am not seeing any of my other cameras showing up (when my logical mind tells me they should have automatically populated all the stations). Can anyone point me to the magic button which brings them on-stream?

Also, I'm currently drawing power for the wi-fi stations via POE injectors since I'm not an electrician and can't figure out how to connect a 12v DC PSU to these units. The box includes a terrifying cat o' nine tails wiring loom but I don't know how to join it to a PSU, or to wire it into the back of the unit. Is there an idiot's guide somewhere?
 
Hi everyone.

Is there some possibility to disable IR light on the door station (DS-KD8003-IME1)?
It produces VERY crappy images while IR light is enabled.

Hi, all.

I will answer to myself on this question. Consider it as a little contribution to the knowledge base.

I managed to turn off IR Light and Call Button backlight via IVMS4200 version 3.2.0.10; Thanks god, it works very smoothly. Video footage became MUCH better.
 
How? Where?


I was unable to turn off IR light prior to upgrading IVMS.

Last night I installed newer version of IVMS ( see version number in attachment)

Now it's ok

BTW, panel's firmware is 2.0.8 build 191029
 

Attachments

  • 8003.png
    8003.png
    98.3 KB · Views: 55
  • 8003-2.png
    8003-2.png
    6.8 KB · Views: 52
  • Like
Reactions: ipOsX
Thank you! Could be a life-saver - tonight will tell. Did you see my horror movie?

Disappointing that the UK portal doesn't list this version of iVMS.

Btw, since you seem to have been through every setting, can you tell me what "Low", "Medium" and "High" mean under Density Setting in the Lite Storage [SD card] tab?