whoslooking
IPCT Contributor
Check through my posts its in there.
I installed the firmware 5.2.5 of your link:Check through my posts its in there.
If your camera has a build firmware above 5.2.3 then you cannot install a lower firmware than 5.2.5.I installed the firmware 5.2.5 of your link:
https://www.dropbox.com/sh/jdbjxlaukrehh15/AADOSefrwU0D7PRyr5whK4aFa?dl=0
but the version I have left V5.2.0 build 140928 !!!
ok, I installed the 5.2.0, now I try the 5.1.6If your camera has a build firmware above 5.2.3 then you cannot install a lower firmware than 5.2.5.
You said in your earlier post it was 5.2.3 then you can install 5.1.6 this is by far the best officially released firmware also found in my posts
I make firmware. And i try updgate from web interface, on step rebooting dvr do nothing.The tool changes the language of the firmware file - not the language of the NVR - so that the NVR does not reject the firmware file with 'language mismatch' when an upgrade is attempted.
From your screenshot - it looks like telnet is not available on the firmware that is installed.
If your camera has a build firmware above 5.2.3 then you cannot install a lower firmware than 5.2.5.
You said in your earlier post it was 5.2.3 then you can install 5.1.6 this is by far the best officially released firmware also found in my posts
for model camera 2CD3310 your firmware 5.1.6 not compatible; the firmware compatible is the 5.2.0_140928ok, I installed the 5.2.0, now I try the 5.1.6
thanks
Thanks this was the last piece of the puzzle fixed, now have a working downgrade from 5.30 Chinese to 5.25 English.2 All
New version 05R of hiktools avaible.
Added support for file order, based on 5.3.0
Test it!