Hikvision NVR English firmware 3.4.80

Hey i updated my DS-7608NI E2/8p to v3.480 and it fixed the email issue
 
Update: test email on nvr works. I am getting the test email in my gmail account. But on cam settings test email failed. Not sure why
 
Hey i updated my DS-7608NI E2/8p to v3.480 and it fixed the email issue
Click to expand...
Interesting.
If you have time, and have the cameras and NVR set up with motion detection and continuous recording, could you see if the web GUI Playback timeline shows motion markings along the continuous line?
We seem to have variable experience with that on this firmware.
 
alastairstevenson said:
Interesting.
If you have time, and have the cameras and NVR set up with motion detection and continuous recording, could you see if the web GUI Playback timeline shows motion markings along the continuous line?
We seem to have variable experience with that on this firmware.
Click to expand...
During playback i am not seeing any motion markings.Let me add also that all my cams are on the latest firmware v5.40 . And on cam settings under email they all have the option to select TLS and Enable STARTTLS which i both selected on port 587. But after the latest nvr update i notice these options are not there on NVR or not yet added

Getting motion markings(red) in GUI playback
 
Last edited by a moderator:
UPdate: Gmail working for me.. now. Also getting emails on my hotmail account with pics as well. Anyone else with similar experience?
 
Paul Diaz said:
i think he does would you use eng or overseas just worried about stuffing it up
Click to expand...
It seems that we have the same NVR model.All i did was to just login to my NVR and upgraded it from hikvision GUI using the browse function. Of course i downloaded it from Hik Euro before , extracted and save to my PC desktop. I think you should not have any concerns about correct FW. It validates firstly.
 
Last edited by a moderator:
@von101
Yes absolutely
Click to expand...
Check out the seemingly greyed-out icon at the bottom left of the Playback web GUI screen.
If you select, say, motion, and let it work for a second or so, you'll see quite a different time-line appear.
 
Last edited by a moderator:
Does anyone happen to know latest version of stable firmware for DS-7608NI-SE/8P

I am in US using US firmware version I believe and not sure if I can switch to European/multilanguage versions of firmware?

Have attached pic of my unit specs. THank you

Thank you.
 

Attachments

  • Snap2.jpg
    Snap2.jpg
    31.9 KB · Views: 21
Do you have to spam the forum with the same question? This isn't even a thread about DS-7608NI-SE/8P.

I wasn't being unhelpful before, if you take this short-cut approach you are going to end up bricking your NVR.
 
Hey Boy,

Don't appreciate you're labeling my attempts to receive help on a public forum as spam.

Thank you for your accommodating attitude here.

I bet you're one of those that voted for Brexit.
 
cenfl said:
I bet you're one of those that voted for Brexit.
Click to expand...
You really are a complete idiot saying stuff like this. You've posted 4 times in different threads asking the same stupid question and can't be bothered to do any research. This is spamming.

When you end up bricking your NVR I guess that will be someone else's fault too.

I bet you're one of those who voted without researching. Bit like randomly trying to update the wrong firmware on your NVR.
 
Did anyone else notice that this new FW times out on the web interface? On 3.4.62 I could leave a tab open on Firefox for a week and start video or playback anytime. Now, 3.4.80 seems to timeout after a period of inactivity. Or so I've observed. I have auto logout set to never.
 
You must log in or register to reply here.
Top Bottom