How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79-Ex

Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

can anyone help please

I have just purchased DS-7616N-E2/8P

how do I change the language for this, I mean which base firmware should I be using?

thanks
 
Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

What's the current firmware version, and what language choices exist in the language drop-down at the login prompt?
 
Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

just an update this issue was resolved, someone kindly sent me the correct firmware and all fine now.
 
Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

chrisnasah said:
just an update this issue was resolved, someone kindly sent me the correct firmware and all fine now.
Click to expand...

Hello,
May you send me a correct english firmware for DS-7616N-E2 ?
 
Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

wzhick; or anyone else,

PLEASE HELP!

I've followed the instructions on a DS-7608N-E2/8P.

I'm now on firmware V3.1.0 build 150511.

The web interface is 100%, AFAICT.

I haven't tested everything, I haven't tested the cameras properly, for example.

There are two serious disappointments of having taken this step so far.

1) The telnet interface is very limited, I don't get a proper shell (no ls!) only a set of specific commands which sometimes don't work. I can live with this but it's a shame.

2) More seriously, the console is in chinese. I have seen comments about this problem elsewhere in the thread, but I don't think I understand the proposed solution. It seems that it's more complicated to enable english in multi language firmware than it is to do the upgrade, is that right?

Can someone please help me, if not to fix it, at least to understand where to get some firmware from that's in Englsih? The first link in the post is what got me a chinese NVR, and the second link doesn't let me in without a login.

Thanks in advance (I hope!)

Update: Flashed to this:

http://www.hikvisioneurope.com/port...ew)/&file=NVR_EXX_BL_ML_STD_V3.3.2_150522.zip

Now refuses all login attempts, so although it's technically working, for all practical purposes, it's bricked.

How can we reset/recover these devices?
 
Last edited by a moderator:
Re: How to flash multilanguage firmware to chinese DS-7608N-E2/8P and all DS-76,78,79

Using Hiktools you take an us/ml firmware, change the region flag from 1 to 2 then tftp the digicap.dav onto your nvr
Like this in coomand


c:/Hiktools lang digicap.dav 2
 
  • Like
Reactions: catseyenu
You must log in or register to reply here.
Top Bottom