I'm new to these forums and somewhat new to installing IP cameras. I recently took on a fairly large job installing 30+ cameras for a local business. I'm having a little bit of a hard time figuring out how to configure my wireless network. The business is a good size and has 5 or 6 houses that need cameras. I'm using foscam hardware and blue iris software. I have also purchased an HP desktop that has good hardware (3.40 ghz i7 and 8gb ram ect.) I have a netgear r7000 router and a netgear ex6200 extender. I'll probably need to get another extender at some point. I feel as though the hardware I purchased is pretty good but I could be wrong. I'm not sure if I should set these routers up as access points, bridges, or repeaters. I also don't know if I should use a static IP address or DHCP. If anybody has any advice on networking or know of any resources that might be helpful I'd greatly appreciate it. I feel as though the hardware I purchased is pretty good but I could be wrong. I'm sure there is some article or resource out there that could answer my questions or at least give me some useful information but I'm having a hard time finding anything. Thanks again