Will do and let you guys know, thank you all for the help !
New RCA HSDB2A 3MP Doorbell IP Camera
- Thread starter fleece
- Start date
EZVIZ App does have a schedule, I have not tried it myself, also not sure if it works on Doorbell Calls...Educate us of your findings...Thanks
@Bossman74
If,
using Android?
You can do the same natively,
using,
the built in DND features (Do Not Disturb).
This too,
can be set on a schedule,
but,
also via quick tile,
for spur of the moment meetings.
This way,
you should still get the notifications,
but,
they will not chime aloud,
if,
setup correctly.
Last edited:
Is it App specific or for the whole phone? My daughter just told me about the feature over the weekend
, for the phone that is. I need to check it out. Just found it in the Android pull-down menu.Ok, never-mind, dumb question, I get it, it is for when you are in church or our Funeral last week, as my daughter pointed out to my wife and I. Smart phone, dumb userIs it App specific or for the whole phone? My daughter just told me about the feature over the weekend
Is it App specific or for the whole phone? My daughter just told me about the feature over the weekend
It's not exactly app specific.
You can however,
set exclusions,
depending,
on what version of android.
In the drop down you mentioned,
I'm guessing you found the Quick tile for it,
So,
long click,
on that tile,
and it should give you an extended menu,
with settings,
versus a single click,
will,
turn it on/off.
Last edited:
So I've shared my user's device with my wife's newly created user on her phone. Sadly the shared side cannot set her own notifications criterias since it shares mine (from the master app). I've added a scheduled for motion detection, but have not found a way to deactivated doorbell calls to my phone only during that period.
A nice feature to add in the future would be a location based notifications rules, especially since the app is already checking my location full time. I could use my work location to deactivate all notifications and calls. without using DND mod.
A nice feature to add in the future would be a location based notifications rules, especially since the app is already checking my location full time. I could use my work location to deactivate all notifications and calls. without using DND mod.
TechBill
Known around here
- Nov 1, 2014
- 1,826
- 1,186
I checked my wife home when I got home tonight, .. it looks like the notification setting is locked to the master app only and all of the shared app does not have it own setting of any kind.
On Android,
If you use Tasker,
you can setup a task,
that will activate DND per location,
based on wifi, or gps, or both.
There are other automation apps that will provide the like,
Tasker is just the best of them.
You could,
instead of triggering DND,
simply trigger the different sound modes,
Sound, Vibrate, Silent, Etc.,
via Tasker, or the like,
also.
In Tasker,
you would also setup an exit task,
so that when you leave a location,
the settings would revert.
Last edited:
TechBill
Known around here
- Nov 1, 2014
- 1,826
- 1,186
My wife and I both had playback error tonight on all notifications. Screenshot worked fine but playback kept popping up errors. I had reboot the doorbell to make it stop error'ing out on playback but no record was lost. All the recordings was still on the SC card after the reboot.
bob2701
Getting comfortable
Disconnecting, Physically? If so, have you checked voltage on your wires, or at your transformer? Have you tried the Reset button? You could drain it's battery with No Power for a couple of hours, yes.
Keep us informed of your results, thanks...
Yes, physically disconnected it.
Voltage across wires is good (ie. same as transformer 24vac or 12vac or even 12vdc).
Have not tried Reset button. Would that even work when DB shows no signs of life? Should I reset if I have ezviz but on laview firmware? I suppose I have nothing to lose.
Voltage across wires is good (ie. same as transformer 24vac or 12vac or even 12vdc).
Have not tried Reset button. Would that even work when DB shows no signs of life? Should I reset if I have ezviz but on laview firmware? I suppose I have nothing to lose.
Good catch. Yeah we have found that resetting a Doorbell with different firmware has caused problems. But there is a fix. I would tried to drain the battery first. So even with no lights, is there any communication from the DB? In App or on your router?
New RCA HSDB2A 3MP Doorbell IP Camera
Wow i think that you are absolutely right. So should i go for 16v 10va? Or directly 30va? What do you suggest i upgrade to? Thanks So that would depend on your Chime. Can you find out what model/type you have?
⦁ RESETTING Your Doorbell; If you have changed your Doorbell's firmware to another brand's firmware (ex. You own a RCA Doorbell but have upgraded to LaView's firmware) DO NOT Reset Your Doorbell without changing your firmware back to your Doorbell brand's firmware. If you Reset without changing it back you will be unable to continue the setup process when coming to scanning the OR Scan Code step. There is a fix if you missed this Warning: - rafale
Most have reported about an hour should drain it's battery. But they had a solid light they watched disappear when battery drained. It's really your call, I am like you, I would wait longer.
For Reset, hold down for 5 seconds
We wish you luck...
You have a year or possibly 2 year warranty with your EZVIZ.
EZVIZ - Creating Easy Smart Homes
EZVIZ, a global smart home security brand, creates a safe, convenient and smart life for users through its smart devices and cloud-based platform.
support.ezvizlife.com
