So that would depend on your Chime. Can you find out what model/type you have?Wow i think that you are absolutely right. So should i go for 16v 10va? Or directly 30va?
What do you suggest i upgrade to?
Thanks
So that would depend on your Chime. Can you find out what model/type you have?Wow i think that you are absolutely right. So should i go for 16v 10va? Or directly 30va?
What do you suggest i upgrade to?
Thanks
It says trine product. Cant see the modelSo that would depend on your Chime. Can you find out what model/type you have?
I first turned on the "EZVIZ" logo and then loaded the LaView utilizing the link you provided several pages back which is the same link I believe you have posted above. Once I updated to LaView, the logo automatically changed to "RCA". There was no option in the configuration tool to turn it off, as expected. Then I loaded the EZVIZ firmware you also linked to a ways back in this thread. When I reverted back to EZVIZ, that is when it bricked.So can you tell us which firmware you loaded on your EZVIZ to get the RCA Logo? Does the EZVIZ have a Logo?, if not then just load LaView firmware.
I guess my question is can you let us know what order and what firmware you loaded?
LaView firmware
Thanks
Not sure why you are getting nothing at the 5 foot setting.So...after an initial nice period, I've become underwhelmed with this doorbell cam. So far I can't get the motion detection to work well at all - either it detected EVERYTHING (any car driving by) with the 9ft setting or nothing at all with the 5 ft setting.
And it keeps freezing up in MotionEye after a period of time or when there's motion.
I knew it couldn't have been as easy as I thought it would be
Ok then good news then I would get a 16v 30va and you will be good. If you need suggestions, let us know. Amazon has a long list of transformers available.It says trine product. Cant see the model
I see its written 10-16v
I apologize but I am confused. The Remove RCA Logo trick is Only for those who want to get rid of the RCA Logo. If your EZVIZ did not initially have a Logo then all you need to do is update to the LaView firmware.I first turned on the "EZVIZ" logo and then loaded the LaView utilizing the link you provided several pages back which is the same link I believe you have posted above. Once I updated to LaView, the logo automatically changed to "RCA". There was no option in the configuration tool to turn it off, as expected. Then I loaded the EZVIZ firmware you also linked to a ways back in this thread. When I reverted back to EZVIZ, that is when it bricked.
When the new one shows up, I'm going to leave the "EZVIZ" logo off and update to LaView firmware.
Does this looks good?Ok then good news then I would get a 16v 30va and you will be good. If you need suggestions, let us know. Amazon has a long list of transformers available.
That looks good, this is the one I ordered and am using:Does this looks good?
Maxdot Doorbell Transformer Compatible with Ring Video Doorbell Pro 16v 30va Hardwired Door Chime Transformer Maxdot Doorbell Transformer Compatible with Ring Video Doorbell Pro 16v 30va Hardwired Door Chime Transformer: Amazon.ca: Tools & Home Improvement
Do i have to turn off the main power of just a breaker its on?
Ok because it looks like it is connected to the electric panel directly. I did turned off the actual breaker when installed the doorbell but the transformer installation looks weird to me.That looks good, this is the one I ordered and am using:
I understand the $25 or more free shipping though...Amazon.com: Doorbell Transformer 16V 30VA, Hardwired Door Chime Transformer Fit Compatible with Nest Hello Doorbell and All Versions of Ring Doorbell : Tools & Home Improvement
Amazon.com: Doorbell Transformer 16V 30VA, Hardwired Door Chime Transformer Fit Compatible with Nest Hello Doorbell and All Versions of Ring Doorbell : Tools & Home Improvementwww.amazon.com
Just the breaker, not the main. What I did was have my wife ring the doorbell while I turned off each breaker until it rang now more to find it.
Can you send us more pictures, if you have to take the panel off the main breaker box, then YES, I would turn off the Main. BUT keep in mind the Wires connecting your Main Breakers is still LIVE.Ok because it looks like it is connected to the electric panel directly. I did turned off the actual breaker when installed the doorbell but the transformer installation looks weird to me.
Not sure why you are getting nothing at the 5 foot setting.
With the LaView firmware, the sensitivity settings in Batch Configuration Tool are grayed out. You might check depending which firmware/brand you have.
Yes i think i need to take the panel off. Will send pics tomorrow. Thanks for your help. Very appreciatedCan you send us more pictures, if you have to take the panel off the main breaker box, then YES, I would turn off the Main. BUT keep in mind the Wires connecting your Main Breakers is still LIVE.
Example:
View attachment 52299
HI, In my case I left the DB unpowered for about an hour. I then was able to reset and reload the original firmware.I went ahead and got a replacement EZVIZ DB1 coming from Amazon. Regarding the logo on the video feed, I believe I turned it "on" before I updated to the La View firmware. Thus is went for a EZVIZ to RCA logo. I reckon I need try it with it "off" this go around? I'm trying to avoid having to go back from the La View to EZVIZ firmware since that is when mine got bricked.
I apologize but I am confused. The Remove RCA Logo trick is Only for those who want to get rid of the RCA Logo. If your EZVIZ did not initially have a Logo then all you need to do is update to the LaView firmware.
Again I apologize for the misunderstanding. The reason the RCA owners had to load the EZVIZ firmware is because they did not have the option to turn off Logo in the RCA firmware using iVMS-4200 or Batch Config. Tool. Once they turned it ON with the EZVIZ firmware loaded they would load LaView firmware where it stayed off. Even the LaView firmware does not have the Logo on/off option. Each firmware is different and enables and disables certain options in their Hikvision tools.
So Yes, if you do not have a Logo showing in your View screen then all you need to do is upgrade to LaView's firmware.
LaView's Firmware build 190716:
View attachment 52297
*** I EDITED THE 101 ***
I have the Ezviz firmware as of now. Outside of an update, I haven't touched anything else - has the motion settings greyed out as well. And yeah, the motion thing is really odd - cars in the street (which is at least 20ft from my front door, if not more) works on the middle setting but when I turn it down one it see's nothing on the sidewalk up to my door that's center image.
Re: MotionEye - it's a frontend to the motion suite of image/motion detection tools (ccrisan/motioneyeos) - the android version is something else or a port I believe. I had 4-5 cameras on it (inside the house, 3 foscam's, 1 Wyze) and it was ok, this one it's choking on. So, trying a few things - using the substream and just put MotionEye onto a Pi4 vs a Pi3b+ with just the doorbell. Will see if it's a processing power vs. network issue now and get it all aligned.
Did you turn Off or On the Logo in the iVMS-4200 or Batch Config. Tool software before you upgraded to LaView firmware?I too bought the EZVIZ version and uploaded the LaView FW posted from the 101. Using the LaView FW resulted in the RCA logo always on. I am leaving it in for now especially since it might get bricked when trying to reflash. Any idea why flashing the LaView FW results in the RCA logo?
Did you turn Off or On the Logo in the iVMS-4200 or Batch Config. Tool software before you upgraded to LaView firmware?
No DO NOT do anything yet. Let us figure this out...I used iVMS-4200 and did not change a single setting. I just flashed the LaView FW and when it rebooted, it had the RCA logo. Why does the LaView firmware have the RCA logo? What do you think the best way to get rid of the logo? Should I try the LTS FW instead? Thanks for the help.
So one more question, to get a second confirmation, you did not have an EZVIZ Logo or RCA Logo in your view screen in the App., prior to loading the LaView firmware right?I used iVMS-4200 and did not change a single setting. I just flashed the LaView FW and when it rebooted, it had the RCA logo. Why does the LaView firmware have the RCA logo? What do you think the best way to get rid of the logo? Should I try the LTS FW instead? Thanks for the help.