Emiks5
Pulling my weight
I had to switch it first on and then off again in the ezviz app
New RCA HSDB2A 3MP Doorbell IP Camera
- Thread starter fleece
- Start date
Sorry for all the questions but which version of the EZVIZ App you running? I have not found the Ringtone option in version 4.0.4.1217
Emiks5
Pulling my weight
No problem. I had the 4.04 version installed for I guess two weeks and the option did NOT appear in the settings until I updated the DB1 to the new FW
Well hopefully LaView or Nelly's will add the option in an updated FW or EZVIZ will add ONVIF support in theirs
I only know for sure the gDMSS app works for listening to audio from the doorbell as I never attempted 2 way and I believe it might be the same for tinycam but never tried 2 way audio there either. I primarily use the Hik-Connect app for answering my doorbell video notifications as it notifies quickly on my phone and it's worked the best for my setup.
The "outdoor bell sound" toggle switch is the key as that is what is missing in the prior FW build to manipulate the ring tone.
I know this is a bit cheesy, I am not great using Windows Paint programNot yet
, but I edited a diagram and added our Hikvision DB , just need to add Power Kit (at Chime) to complete the diagram. I am sure you have a wiring plan already but I figured I would share. Depending on how your setup is, what is common is one cable (2 wires) is ran from Doorbell Button to Transformer (Usually in Attic/Basement), then one cable (2 wires) are ran from Chime to Transformer. When done you will have a complete loop wired.View attachment 53507
Can someone get the original file date for me/us? I tried wget but I am not familiar enough with this to get HTTP Header info.
I want to see if this is the latest EZVIZ 191211 firmware and Identify it's last modified date. Prior version 190708
@JSnP was able to get file dates: New RCA HSDB2A 3MP Doorbell IP Camera
Header
JSnP is who first got us our firmware links...
I want to see if this is the latest EZVIZ 191211 firmware and Identify it's last modified date. Prior version 190708
@JSnP was able to get file dates: New RCA HSDB2A 3MP Doorbell IP Camera
Header
JSnP is who first got us our firmware links...
Last edited:
When I downloaded the FW file this morning, I got following so assume it must be the newer 191211 FW as it's larger in size.
3.97 MB (4,167,344 bytes) Probably 191211 ?
3.96 MB (4,155,170 bytes) Firmware 190708 from Q4 2019
Yeah looks like a new one. The old version was from: (Jul 21, 2019) Build 190708 (NO ONVIF Support)
I am saving these firmwares in case anyone, including me, would like to go back...Since they all have the same filename, looking for a date difference...
Thank You.
Haha, yep just figured out the --server-response too for wget
THANK YOU VERY MUCH for your Help....
Last edited:
Akumashinto
n3wb
Hey guys my doorbell is not connecting anymore. Its blinking red and i rebooted it. It then seem to reconnect but i cant see any video feed and few minutes later it shows offline again. Since this morning.. i did not upgrade to latest ezviz fw.
Any idea ?
Any idea ?
What size Transformer do you have?
Akumashinto
n3wb
I changed it 2 weeks ago to a 16v 30va
Akumashinto
n3wb
Just updated the ezviz app and it works now... weird tho because i cdlnt see the doorbell connected to the router..
Hmmm strange. Glad you are back up, let us know if you have anymore issues, hopefully it was a hiccup.
Akumashinto
n3wb
Back to offline.. ill try to switch to 2.4ghz wifi tomorrow... weird because i didnt change anything and it suddenly happened
Good call, let us know results.