TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,825
- Reaction score
- 1,185
But to use the feedback you have to install ezviz app again LOL
YUP!!! LOL!!!!!
But to use the feedback you have to install ezviz app again LOL
Be sure to mention you would be concerned about the safety of your children if they use the apps to monitor and screen who at the door.But to use the feedback you have to install ezviz app again LOL
Rule #1 of the DB1 club: "FIX THE BASICS!"After a few tweaks on the wifi, signal intensity 86 @ 450Mbps, no more drop outs here and super fast response time too, hopefully.
I had it were the red green button came up, but cannot replicate it again.The EZVIZ red/green buttons screen will come up if you answer it on a unlocked iPhone screen from the EZVIZ banner notification that appear from the top.
On the locked screen, that notification banner has been replaced with a iPhone locked slider bar.
Edited - It turn out I was wrong about this after testing it some more .. both lock and unlock screen answer with mic enabled. But in a blink of an eye, I sworn I could see the old style red / green button viewer come up for a second before being switched over to the new viewer .. maybe it just my eye playing tricks on me ..
Thank you for this video. Learned of the new DB1C coming out. It is a 1080p Cam but supports 256Gig SD and H.265 (Which is a great compression)
Thank you for this video. Learned of the new DB1C coming out. It is a 1080p Cam but supports 256Gig SD and H.265 (Which is a great compression)
EZVIZ DB1C - Wi-Fi Video Doorbell
Enjoy high-quality video chat with visitors and keep an eye on what's happening at your front door right through your phone.www.ezvizlife.com
View attachment 64831
Because he will not want to be seen to be promoting the use of other firmware, hacks or anything that could cause problems for Ezviz, imagine if Ezviz got flooded will calls, emails saying i put some other firmware on my camera and now it will not work.someone put a comment in his video linking to the 101 to this thread to unlock more features and he deleted it? I wonder why.
Thanks David, I was able to reset my password.So I am not the one that can help you but do not panic, there is a solution to fix this so do not trash your DB. Worse case a hard reset (no power for an hour or two) to fully drain it's battery, is one fix. This will get you back to factory settings, with the P/W reset back to original.
But there is probably a better way, so I am going to let others Chime in...
From our 101:Thanks David, I was able to reset my password.
Now I run into another problem. I can't change any options in the CCD menu. When I try to change something I get the error "Error Code HCNetSDK.dll [11]. (Data error. The data sent to or received from the device is incorrect)" and Batch Configuration closes itself.
In the "Image" menu I can make changes, the problem is in the CCD menu.
What do I miss?
View attachment 64895
I just did the same, we will see if he removes my message...If he does I will remove his review so we do not have any issues. I am sure EZVIZ is aware of our Forum, it is in all the searches of their DB.someone put a comment in his video linking to the 101 to this thread to unlock more features and he deleted it? I wonder why.
If EZVIZ would just turn on the ONVIF option in their firmware, they would solve any foreign firmware problems. Though they would still get calls from people trying to connect their DB to third party devices (NVRs. Synology, Blue Iris, etc.) via ONVIF. We just saw that they listened to a few owners that complained about no audio on DB button press calls and they changed their App to please them. Hopefully a flood of users will call/contact them on this huge mistake and they will listen to them/us and change this back (Or add an Enable/Disable option like TechBill suggested) to fix this very open audio problem.Because he will not want to be seen to be promoting the use of other firmware, hacks or anything that could cause problems for Ezviz, imagine if Ezviz got flooded will calls, emails saying i put some other firmware on my camera and now it will not work.
He mentions a free 3 hour cloudservice. I don’t see that available in the options. There is only A trial version of the 24/7 cloud service in my app available. Is this country dependent?
is working well with version 3.0.2.6From our 101:
⦁ If you are having problems with Batch Config Tool version 3.0.3.8 crashing, download version 3.0.2.6 for fix - just2bad
Good deal, glad you are all fixed. Enjoy the DB.is working well with version 3.0.2.6
thx again David
Guess he got it from Amazon:He mentions a free 3 hour cloudservice. I don’t see that available in the options. There is only A trial version of the 24/7 cloud service in my app available. Is this country dependent?