NHD-888MSDx 16 SONVR-168580H x 1 NVR - new software needed

Go back to the NVR screenshot and see which IP address is missing.
 
Yeah the plugin will only work with Explorer. Not Edge or Chrome with an IE tab.

You need to use actual Explorer.

Explorer is still there and there are ways to get Explorer again.

The simple way is to change the BHO folder to another name like oldBHO and BAM Explorer is back...and this thread also shows other ways...

C:\Program Files (x86)\Microsoft\Edge\Application\110.0.1512.48\

Then change BHO to oldBHO or something else and Explorer will open

Looks Like Internet Explorer Died Today

Or this way:

Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu
 
  • Like
Reactions: zebedeepet
renamed the BHO folder but it keeps opening bloody Edge not explorer - Any other way to open it?

Thank you so much for your help btw
 
In Edge look for the 3 dots at the top right.
hit the 3 dots
look down to where it says open in Explorer.
done
 
Last edited:
  • Like
Reactions: zebedeepet
Now add the camera to BI.

For testing purposes, if the BI computer is on a different IP subnet than the camera, go into the camera and find where to assign the IP address and put it on the same IP address subnet as your computer, but make it a higher number like x.250 and then add it to BI
 
There is no BI NVR - you need a PC and put BI on it.

And yes you would now get a POE switch since you can't feed the cameras thru the NVR.
 
The go to is i5-8500 that you can buy off ebay as that is the oldest that can accept Win11. Anything newer is overkill for BI.

But if you have an older one laying around or maybe a city auction and you can pick up a 4th gen for $25, they work as well.

My humble i5-4590 still humming along with 30+ cams:

I see people posting about their i7-xxxx system bogging down with less than 10 cameras so I wanted to update my setup. I have ~33 cams running on my BI system: HP Elitedesk 800 G1 tower i5-4590 @ 3.3GHz 16GB ram 12TB total purple drives for storage 30+ total cams currently - 22 cams visible in...
ipcamtalk.com ipcamtalk.com
 
You will have to do the same procedure as you did the first camera to get the IP address on your subnet, but without knowing model number, that POE switch will probably work.
 
You must log in or register to reply here.
Top Bottom