so ... assign static ip to this camera. Then connect to the switch and the switch to the router. Does the switch need to be connected to the PC?
NHD-888MSDx 16 SONVR-168580H x 1 NVR - new software needed
- Thread starter zebedeepet
- Start date
YES!!! Got two working cameras. So just had to change to static kept the same IP as was assigned. Now I know I can connect them all up. I need to get a PC that will be up to spec and I can add a lot of HDD to keep storage longer than the current 4 days.
I have 16 cams and wanted to add a further 8. Using AI and that.
I found a pc I had around Intel R Xeon R CPU W3680 3.33Ghz
Ram 24 GB
64 bit
Windows 10
Pro N 22Hz
Is this gonna be a good start.
I found a pc I had around Intel R Xeon R CPU W3680 3.33Ghz
Ram 24 GB
64 bit
Windows 10
Pro N 22Hz
Is this gonna be a good start.
happy to buy a better system but didn't want to setup on this pc and then have to do it all over again
H. Swanson
Pulling my weight
I didn't want to create a new post so I'll use this one. I have the EmpireTech NVR and S3 cams, and it keeps asking me to install their plugins. Are they safe to install? Looks like I should only use legacy Internet Explorer?
Here is a VirusTotal scan:
Here is a VirusTotal scan:
Last edited:
This has nothing to do with this post, but OK LOL.
If you want full functionality of the NVR then you need to install them LOL.
And yes Explorer is your best bet.
Keep in mind that many of these virus scans simply work off of algorithms of number of their customers that have used the file/program, so if it is coming up in some of them, that is probably why.
H. Swanson
Pulling my weight
I used this post because there was talk about using the web plugins. I didn't think my question merited a whole new thread.
Anywho, thanks for the response.
And yet we do get this question as a new thread several times a year LOL
WebGUI interface of my NVR
Hello, I have an 4108H-P Dahua NVR and I have problems connecting to its WebGUI interface. Whenever I type its address, there is a request for a plugin but the antivirus (standard Windows defender) detects the plugin as virus and I cannot proceed. So far I have used the standard NVR interface...
Dahua nvr
Hello, I setup a Dahua NVR with some cams. Following excellent advice, I got the PTZ working fine with autotrack. But then I encountered some serious problems. Went thru the process of making sure NVR and all cams had the most recent bios. When I went to download the browser plugin for...
Question
I have been getting a warning messages from MalwareBytes. I attached one but erased the IP address and the Port. The port it is trying is correct, the IP address is never the same. It references Blue Iris specifically. Can anyone tell me what is going on? MalwareBytes is apparently doing...
Installing new EmpireTek IPCam
HI All, I just bought a EmpireTek IPC-Color4K-T (3.6 mm) at Amazon.de. First Few Questions. 1. Is it the same as the Dahua IPC-HDW5849H-ASE-LED and if so: can I install the original Firmware from Dahua's website? 2. Some pages on the webinterface is see a message that I need to install some...
Web access to DH-IPC-PDW5849-A180-E2-ASTE and WebPlugin
I am connecting to the EmpireTech 180 camera (DH-IPC-PDW5849-A180-E2-ASTE) via a browser and along the bottom of the screen is the message: To use this function, please download and install the plug-in. Click here to download. When I attempt to download the Webplugin.exe from the link MS Edge...
H. Swanson
Pulling my weight
Thank you. I really appreciate all the advice.
Having said this, I suggest dispensing with the patronizing responses to newer people like me who don’t know this stuff. I did search for threads and found this one. I obviously didn’t use the right search terms or didn’t know where to look exactly. That doesn’t mean I didn’t try.
This isn’t just aimed at you but any of the experienced contributors. You’ve been truly responsive and amazingly helpful, so please take this as constructive feedback and not inflammatory. This forum has been otherwise fantastic.
Having said this, I suggest dispensing with the patronizing responses to newer people like me who don’t know this stuff. I did search for threads and found this one. I obviously didn’t use the right search terms or didn’t know where to look exactly. That doesn’t mean I didn’t try.
This isn’t just aimed at you but any of the experienced contributors. You’ve been truly responsive and amazingly helpful, so please take this as constructive feedback and not inflammatory. This forum has been otherwise fantastic.
Flintstone61
Known around here
Hijacker!
Looking at this Intel Core i7 14700K 14th Generation 20 Core Processor - would be a good one for AI
10TB WD Purple would hold around 25 days.
Windows 11
Then
-PSU 850W?
-Motherboard
-Cooling
-Case
Looking at this Intel Core i7 14700K 14th Generation 20 Core Processor - would be a good one for AI
10TB WD Purple would hold around 25 days.
Windows 11
Then
-PSU 850W?
-Motherboard
-Cooling
-Case
Last edited:
That is way overkill for BI, but if you can get a good deal on it, you will be set for a long time!
I've done it!
I have 16 cameras all static ip all up and running on its own computer build.
However, the cameras are quite delayed.. substream springs to mind?
Also connecting on a web browser within the LAN - doesn't work. No password or login details appears. I have 4 adpators on the web server though ....
I have 16 cameras all static ip all up and running on its own computer build.
However, the cameras are quite delayed.. substream springs to mind?
Also connecting on a web browser within the LAN - doesn't work. No password or login details appears. I have 4 adpators on the web server though ....
Hey, I had to unplugged the cables and it was all switched off for about a week. When I plugged it back in (prob different ports of the poe switch) half the cameras worked and half won’t connect. I checked and the cameras still have their static ip but not showing up?