Menu
What's new

Pinout for Hikvision DS-2CD2032F-I Bullet Camera

T

trinialf

n3wb
Joined
Oct 3, 2016
Messages
4
Reaction score
1
[FONT=&quot]Good day everyone. I am hoping that somebody on this list can help me with this problem. The female end of my Hikvision 2032F-I got corroded and needs to be changed. The wire colours are however, not the standard "Value" series colours. My colours are: [/FONT]
[FONT=&quot]Orange[/FONT]
[FONT=&quot]Yellow[/FONT]
[FONT=&quot]Green[/FONT]
[FONT=&quot]Purple[/FONT]
[FONT=&quot]Black[/FONT]
[FONT=&quot]Blue[/FONT]
[FONT=&quot]Brown[/FONT]
[FONT=&quot]Red[/FONT]

[FONT=&quot](No White and Grey).[/FONT]

[FONT=&quot]I have been trying for some time now to try and replace the end with no luck. Even emailed Hikvision support and they too seem to be clueless. They point me to the online PDF, which does not work. They also sent me this:[/FONT]

[FONT=&quot]T568B Standard --> DS-2CD2032F-I Wire[/FONT]
[FONT=&quot]White/orange striped --> Orange[/FONT]
[FONT=&quot]Solid orange --> Yellow[/FONT]
[FONT=&quot]White/green striped --> Green[/FONT]
[FONT=&quot]Solid blue --> Purple[/FONT]
[FONT=&quot]White/blue striped --> Black[/FONT]
[FONT=&quot]Solid green --> Blue[/FONT]
[FONT=&quot]White/brown striped --> Brown[/FONT]
[FONT=&quot]Brown --> Red[/FONT]

[FONT=&quot]But that is not working as well. Camera is not even powering on. Has anyone on this list encountered a similar problem before and has a solution for this?[/FONT]

[FONT=&quot]Most appreciated![/FONT]
 
T

trinialf

n3wb
Joined
Oct 3, 2016
Messages
4
Reaction score
1
Thank you for the feedback. I have been researching this for the past week. I've tried the following recommendations that I've found in this forum and on the Hikvision .pdf including the following:

From:
http://www.hikvision.com/ueditor/net/upload/2015-06-10/57806a32-51c0-4ae4-b937-384098c12dc8.pdf
White/orange striped -Black
Solid orange ->Brown
White/green striped ->Red
Solid blue ->Yellow
White/blue striped ->Green
Solid green ->Orange
White/brown striped ->Blue
Brown ->Purple


That did not work!

I then tried:

White/orange striped ->Blue
Solid orange ->Brown
White/green striped ->Red
Solid blue ->Yellow
White/blue striped ->Green
Solid green ->Orange
White/brown striped ->Black
Brown ->Purple

Also not working!

I followed djmt99 and Sandyman's recommendation which is:

White/orange striped ->Blue
Solid orange ->Purple
White/green striped ->Yellow
Solid blue ->Red
White/blue striped ->Orange
Solid green ->Green
White/brown striped ->Brown
Brown ->Black

That too is not working. Camera is powering up. IR lights are coming on and off as they should, but I am not getting to communicate with the camera - so I suppose he Rx and Tx pins are incorrect.

The closest I've come to a working solution is this:

White/orange striped ->Black
Solid orange -> Purple
White/green striped -> Yellow
Solid blue -> Red
White/blue striped -> Orange
Solid green -> Green
White/brown striped -> Brown
Brown -> Blue

With the above, the camera is powering up fine. IR is coming on and off as expected but I am getting intermittent replies when I ping the default IP. The SADP is not finding the camera either.

I have a limited number of options left as I am running out of cable :) - hence my plea for HELP!!
 
Q™

Q™

IPCT Contributor
Joined
Feb 16, 2015
Messages
4,990
Reaction score
3,991
Location
Megatroplis, USA
Did you read through all of the (Hikvision related) search results which the links I posted provide?
 
You must log in or register to reply here.
Top