newfido
n3wb
i have the qc894 nvr and attached a qsee qtn 802b camera, but only manual record will work. motion record will not work with all correct settings set. qsee support does not understand why and said instead of qsee solving the problem that i should splurge and install a large hard drive into the nvr to record more than 2 weeks time. As on constant record that is how long a 1 terabytte drive lasts.
I have a Nightowl system that uses motion detection perfectly, so i do know how to use the motion settings.
I asked qsee if the qtn camera i installed is incompatible with the motion detection nvr qtc 894, but really if the camera can record video onto the NVR then would the NVR not be able to detect motion from the camera? As the motion detection is done in the NVR and the video is reaching the NVR.
Qsee wants another 200.00 for a compatible camera and i am not sure and qsee is not sure that will fix the problem. My advice to all is avoid qsee products, go with Nightowl or better recomendations.
I have a Nightowl system that uses motion detection perfectly, so i do know how to use the motion settings.
I asked qsee if the qtn camera i installed is incompatible with the motion detection nvr qtc 894, but really if the camera can record video onto the NVR then would the NVR not be able to detect motion from the camera? As the motion detection is done in the NVR and the video is reaching the NVR.
Qsee wants another 200.00 for a compatible camera and i am not sure and qsee is not sure that will fix the problem. My advice to all is avoid qsee products, go with Nightowl or better recomendations.