alastairstevenson
Staff member
And a Merry Christmas and a Guid New Year to you!
Excellent!Works like a charm on DS-2CD2132F-IS
Sorry, not possible for that version of firmware :can you help me find the password for my DS-2CD1201D-I3
V5.3.6 build 151221Yes it's not R0, G0 possible, but what firmware version?
Because i use NVR europe and i want use this camera hacked to english with this NVR.
The camera will work OK with the NVR, when queried for language it will say 'English'.Now i have updated latest firmware 5.4.5 and camera works ok.
The region code is in mtd6 location 0x55 and can be modified as follows:but is any chance to change setup region in serial number ?
Not easily possible due to the need to install 'hacked to EN firmware' to overcome the language setting in the secure chip that holds the camera hardware signature.and update in future by GUI
Already answered for you : [MCR] Hikvision packer/unpacker for 5.3.x and newer firmwareOr is any chance to help me step by step maybe once update this DS-2CD2035-I ?
That's worth knowing - may help others, thanks.left the devType bytes untouched as 0x2623- this might be the type for the DS-2DE2202I-DE3/W
Sounds like you did a bit of network sniffing.I wanted to use a standard TFTP server and so had to work with Hikvision's custom handshake on port 9978.
Watched what it was up to on the network - the camera sends a UDP request to port 9978, reply with payload "SWKH" and it moves onto a standard TFTP load. I wrote a couple of lines of Python to do the handshake. The mtd work was great Alistair!Hey, well done! Another good result.
That's worth knowing - may help others, thanks.
Sounds like you did a bit of network sniffing.
Did you somehow emulate the Hikvision handshake - or end up just using Hikvision's updater?
Neat!I wrote a couple of lines of Python to do the handshake.