Thanks, the site you suggested looks like it has some useful information. There is training available through my company which I am scheduled to take, and I will continue to look through the documentation attached to this thread. I guess I was looking for some general guidance and be able to ask some seemingly dumb questions to help myself out and get ahead. Thanks for all the help
Resource Guide on IP Technology for all Noobs
- Thread starter zero-degrees
- Start date
kf4mro
n3wb
Thanks Zero-degrees
I saved those to my iBooks to read later.
I’ve been working on this camera all day and about tiered of it for today.
I saved those to my iBooks to read later.
I’ve been working on this camera all day and about tiered of it for today.
radekzat
n3wb
Francisco73
Getting the hang of it
I tried to download two of the PDFs yesterday using latest 64 Bit Linux Mint and Opera both updated some days ago. I did NOT manage to download them. Are the PDFs ok? I can try later with Firefox. Thanks.
radekzat
n3wb
Storm Johnson
n3wb
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
Hi there!
Glad to be a part of the community. Hoping to pick up some tips and tricks for my own system. Primarily i do have an issue with it I'm hoping someone may help with. I am an electrician with Data cabling endorsement so I know how to install/terminate data cables. Enough to be dangerous it seems.
I have just replaced my old CCTV co-axial system with sparkly new Dahua NVR DHI-NVR4108hs-8P-4KS2/L and 8 Dahua DHI-IPC-HDW3449TMP-AS-0280B 24/7 colour cameras. It has been running for 2 weeks now and have been playing with settings with both the NVR and the DMSS app. Since changing recording from motion detection and now incorporating 24 hour recording with AI Human/motor vehicle sensing, I have been getting notifications and have witnessed the cameras intermittently going offline for short periods at anytime. They re-connect on their own and continue operating as expected until next drop out. At this point it seems to be the same 3. The cable length would be no more than 30 metres of CAT6 Belden solid copper unscreened. Continuity/Polarity checked with NetScout tester. Not all cams have LED illuminator active referring to power draw.
Camera firmware appears to be current. NVR is located in free air and mounted to outside back of my TV cabinet so well ventilated.
Any ideas would be truly appreciated.
Cheers
P.S. clicked on the Cliff Notes links in the above posts but link broken
Glad to be a part of the community. Hoping to pick up some tips and tricks for my own system. Primarily i do have an issue with it I'm hoping someone may help with. I am an electrician with Data cabling endorsement so I know how to install/terminate data cables. Enough to be dangerous it seems.
I have just replaced my old CCTV co-axial system with sparkly new Dahua NVR DHI-NVR4108hs-8P-4KS2/L and 8 Dahua DHI-IPC-HDW3449TMP-AS-0280B 24/7 colour cameras. It has been running for 2 weeks now and have been playing with settings with both the NVR and the DMSS app. Since changing recording from motion detection and now incorporating 24 hour recording with AI Human/motor vehicle sensing, I have been getting notifications and have witnessed the cameras intermittently going offline for short periods at anytime. They re-connect on their own and continue operating as expected until next drop out. At this point it seems to be the same 3. The cable length would be no more than 30 metres of CAT6 Belden solid copper unscreened. Continuity/Polarity checked with NetScout tester. Not all cams have LED illuminator active referring to power draw.
Camera firmware appears to be current. NVR is located in free air and mounted to outside back of my TV cabinet so well ventilated.
Any ideas would be truly appreciated.
Cheers
P.S. clicked on the Cliff Notes links in the above posts but link broken
The cliff note link earlier in this thread is for a document (.docx) that appears to be on someone's google drive. Blue bar across the top of the IPCT pages has a wiki drop down. The cliff notes, among other great reads, is there.
Are your cameras dialed in to max resolution/quality? Consider posting a screen shot of a cameras video settings.
Are your cameras dialed in to max resolution/quality? Consider posting a screen shot of a cameras video settings.
looney2ns
IPCT Contributor
Drop outs are typically are found to be related to cabling issues'.Hi there!
Glad to be a part of the community. Hoping to pick up some tips and tricks for my own system. Primarily i do have an issue with it I'm hoping someone may help with. I am an electrician with Data cabling endorsement so I know how to install/terminate data cables. Enough to be dangerous it seems.
I have just replaced my old CCTV co-axial system with sparkly new Dahua NVR DHI-NVR4108hs-8P-4KS2/L and 8 Dahua DHI-IPC-HDW3449TMP-AS-0280B 24/7 colour cameras. It has been running for 2 weeks now and have been playing with settings with both the NVR and the DMSS app. Since changing recording from motion detection and now incorporating 24 hour recording with AI Human/motor vehicle sensing, I have been getting notifications and have witnessed the cameras intermittently going offline for short periods at anytime. They re-connect on their own and continue operating as expected until next drop out. At this point it seems to be the same 3. The cable length would be no more than 30 metres of CAT6 Belden solid copper unscreened. Continuity/Polarity checked with NetScout tester. Not all cams have LED illuminator active referring to power draw.
Camera firmware appears to be current. NVR is located in free air and mounted to outside back of my TV cabinet so well ventilated.
Any ideas would be truly appreciated.
Cheers
P.S. clicked on the Cliff Notes links in the above posts but link broken
Cable's damaged during install.
RJ45's not properly crimped or not crimped to the 568A or B standard, using the standard can't be ignored..
Continuity/Polarity test's don't tell the entire story.
Next time post your own thread instead of highjacking another.
Hi guys. Thanks for reading. I'm looking to buy static IP's for a number of servers to use with in the future. I like building stead reputations and have got to the point where relying on IP's being assigned by server companies is no longer good for me.
I've never bought IP addresses before and was wondering on best practices. I want to buy about 10-20 IPV4 addresses to start with (Possibly more) But don't even know the basics on this stuff. I'm totally happy to admit I'm out of my depth. I've built serverside systems for years but am just now looking at creating and holding my own systems with their own IP's.
routerlogin.ltd
pikashow.ltd
I've never bought IP addresses before and was wondering on best practices. I want to buy about 10-20 IPV4 addresses to start with (Possibly more) But don't even know the basics on this stuff. I'm totally happy to admit I'm out of my depth. I've built serverside systems for years but am just now looking at creating and holding my own systems with their own IP's.
routerlogin.ltd
pikashow.ltd
Last edited:
First off - Welcome to the forum.
This forum is a great wealth of knowledge and can most likely get you where you need to go as well as cause you to spend way to much money
Here are some guides for you to use in getting up to speed on IP technology if you are a novice or even someone just looking to advance your skill set.
Best of luck!
*Disclaimer: I did not write, nor am I the copy right holder to any of these guides.
Boy, so no call? I’m a different type of learner. I’ll keep my stride, persistence beats resistance, my best friend put. Bring a AP student in all classes. Is the a forum of talking on the phone I should go?
By nature, a forum is an online platform. It doesn't have 1-800 help numbers LOL.
As mentioned in your post, type in your issue and lets see if we can help.