REVIEW: HIKVISION DS-2CD2387G2P-LSU/SL

What does the stream selector show on the bottom left of the camera web GUI?
And what video renderer shows as in use - is it the black circle or the M ?
These will vary with the browser in use, which is ?
 
  • Like
Reactions: c hris527
What does the stream selector show on the bottom left of the camera web GUI?
And what video renderer shows as in use - is it the black circle or the M ?
These will vary with the browser in use, which is ?
Thank you. This has solved one problem.
Now I have great resolution on camera web GUI.
 

Attachments

  • Screenshot 2023-10-16 at 23.11.57.png
    Screenshot 2023-10-16 at 23.11.57.png
    2.7 MB · Views: 27
both gateways are the same: 192.168.0.1(of router)
 

Attachments

  • Screenshot 2023-10-16 at 23.21.25.png
    Screenshot 2023-10-16 at 23.21.25.png
    895.2 KB · Views: 8
I have the same camera (DS-2CD2387G2P-LSU/SL) with my NVR: 7616NXI-K1

but I cannot set any event because the little screen where you usually draw perimeter lines display message "IP camera resolution exceed limit set stream", instead of the actual image
I can see everything though in IVMS-4200
 
Thanks for sharing your view. How did you get such a flat looking image from the DS-2CD2387G2P-LSU/SL?
I bought one that's got the hikvision brand on it but apparently the firmware is locked, so I can't upgrade it.

I've been trying to find a dewarp or similar option in the control panel but there isn't anything.
And I've got a fairly bad looking fisheye / spherical image.
 
Did you buy it cheap from an overseas site? Sounds like you got a foreign language version that's has custom adapted English firmware forced onto it. It's probably been upgrade locked because if you try to upgrade the firmware it will brick the camera.
 
  • Like
Reactions: OrangeToast
Did you buy it cheap from an overseas site? Sounds like you got a foreign language version that's has custom adapted English firmware forced onto it. It's probably been upgrade locked because if you try to upgrade the firmware it will brick the camera.
eBay. The language in the control panel is in English but yeah, it's locked.

Does the regular one have a dewarp or some other option that makes the image more flat?