Are you trying to have BI pull the stream from the DVR or directly from the cam?
Is that the Cam's config page (as seen on the DVR UI), or the DVR's config page?
Are your cams on a DVR with it's own PoE switch?
If so, the cam IP (.129?) will not be directly accessible from your LAN (which is probably using a different range).
then again, if your DVR only has a LAN port, and cams are out on the LAN with BI, the cam should be directly reachable at that IP.
so yes, make sure the admin username and password in the BI add-cam/video config page match that of the cam.
what happens if you try 'find/inspect'?
you may need to spell out the cam's rtsp: url, as indicated in the DVR's screen for 'IP Channel':
path: rtsp://192.168.1.129:554/ip0100
but find/inspect usually figures that out for you...
That is the DVR's config page. I should have been more clear. I'm trying to pull from the DVR, if there is a way to pull from the camera directly then please let me know.
The first config is the DVR's config page, the second is also from the DVR. The third is the
blue iris config page.
The cams are on the DVR and no directly connected. How would I go about connecting to them through the DVR?
The username and password have been changed but to no avail.
When I hit find/inspect I"m given this.
Opening 192.168.1.29 port 85...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 500
Opening 192.168.1.29 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
No automatic configuration made
Done
I've tried to spell out the cams rtsp URL but the one given by swan doesn't seem to work. You can see their URL on the second config image. It shows to put "ip/port/cam#/main/substream"
But no matter what combination I try, I'm not getting a response.