IPL g125032b
D-06
WDT Reset
128MB
BIST0_0001-OK
[SDMMC] NO SD!
[NOR]
size:8190 chks:760d659f ok
IPL_CUST g125032b
MXP found at 0x00003000
[SDMMC] NO SD!
decomp_size=0x0003f198
U-Boot 2015.01 (Jun 15 2017 - 09:54:33)
Version: I3g#######
I2C: ready
DRAM: 64 MiB
WARNING: Caches not enabled
MMC: MStar SD/MMC: 0
nor_flash_mxp allocated success!!
MXIC REMS: 0xC2,0x16
Flash is detected (0x050A, 0xC2, 0x20, 0x17)
SF: Detected nor0 with total size 8 MiB
MXP found at mxp_offset[0]=0x00003000, size=0x1000
env_offset=0x3F000 env_size=0x1000
MXIC REMS: 0xC2,0x16
Flash is detected (0x050A, 0xC2, 0x20, 0x17)
SF: Detected nor0 with total size 8 MiB
In: serial
Out: serial
Err: serial
gpio[16] is 0
Net: MAC Address xx:xx:xx:xx:xx:xx
Auto-Negotiation...
AN failLink Status Speed:10 Full-duplex:0
Status Error!
mstar_emac
[NetUpgrade] ts_1st=0x1002
MDrv_EMAC_start
RBQP_BASE=0x23fac000
[NetUpgrade] Get Device MacAddr(xx:xx:xx:xx:xx:xx)
NetUpgrade Timeout
[NetUpgrade] ts_1st=0x1002, ts_2nd=0x13f2, delt_ts=0x3f0
MXIC REMS: 0xC2,0x16
Flash is detected (0x050A, 0xC2, 0x20, 0x17)
SF: Detected nor0 with total size 8 MiB
SF: 1703936 bytes @ 0x40000 Read: OK
## Booting kernel from Legacy Image at 21000000 ...
Image Name: MVX2##I3ge3ce58aKL_LX318####[BR:
Image Type: ARM Linux Multi-File Image (lzma compressed)
Data Size: 1648920 Bytes = 1.6 MiB
Load Address: 20008000
Entry Point: 20008000
Contents:
Image 0: 1573896 Bytes = 1.5 MiB
Image 1: 75012 Bytes = 73.3 KiB
Verifying Checksum ... OK
## Loading init Ramdisk from multi component Legacy Image at 21000000 ...
Uncompressing Multi-File Image ...
[XZ] !!!reserved 0x21000000 length=0x 1000000 for xz!!
XZ: uncompressed size=0x421ac0, ret=7
OK
initrd load to 0x20FE0000.[0x21180454, 0x00012504]
atags:0x20000000
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 3.18.30 (tuzuguo@dev) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #10 PREEMPT Tue Nov 7 16:06:58 CST 2017
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
early_atags_to_fdt() success
Machine model: INFINITY3 MSC000A-S04A
Reserved memory: created CMA memory pool at 0x23000000, size 80 MiB
Reserved memory: initialized node cma0, compatible id shared-dma-pool
Memory policy: Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32510
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 mtdparts=NOR_FLASH:256K(boot),1664K(kernel),2560K(rootfs),3456K(app),64K(www),64K(para),64K(p2p),64K(log)
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 43196K/131064K available (2898K kernel code, 238K rwdata, 976K rodata, 116K init, 148K bss, 87868K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc03d0de8 (3876 kB)
.init : 0xc03d1000 - 0xc03ee000 ( 116 kB)
.data : 0xc03ee000 - 0xc0429ac0 ( 239 kB)
.bss : 0xc0429ac0 - 0xc044ed08 ( 149 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:16 nr_irqs:16 16
Find CLK_cpupll_clk, hook ms_cpuclk_ops
[ms_cpuclk_init] get dvfs gpio vid_1
Architected cp15 timer(s) running at 6.00MHz (virt).
sched_clock: 56 bits at 6MHz, resolution 166ns, wraps every 2863311527936ns
Switching to timer-based delay loop, resolution 166ns
console [ttyS0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 12.00 BogoMIPS (lpj=60000)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x202bf3a0 - 0x202bf3f8
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Version : MVX2##I3ge3ce58aKL_LX318####[BR:gI3/master]#XVM
GPIO: probe end
MSYS: INIT DONE. TICK=0x04C4CB61
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 2, 20480 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 76K (c0fe0000 - c0ff3000)
futex hash table entries: 16 (order: -4, 448 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
msgmni has been set to 244
io scheduler noop registered
io scheduler deadline registered (default)
i2c /dev entries driver
logger: created 256K log 'log_main'
[ms_uart_probe] uart port 0 use MUX_PM_UART
1f221000.uart0: ttyS0 at MMIO 0x0 (irq = 98, base_baud = 10750000) is a unknown
[ms_uart_probe] uart port 1 use MUX_UART1
1f221200.uart1: ttyS1 at MMIO 0x0 (irq = 99, base_baud = 10750000) is a unknown
URDMA rx_buf=0xC3042000(phy:0x23042000) tx_buf=0xC3043000(phy:0x23043000) size=0x1000
[ms_uart_probe] uart port 2 use MUX_UART0
1f220400.uart2: ttyS2 at MMIO 0x0 (irq = 112, base_baud = 10750000) is a unknown
infinity-audio soc:sound: ASoC: CODEC DAI infinity-codec-dai-main not registered
platform soc:sound: Driver infinity-audio requests probe deferral
infinity-audio infinity-codec: ASoC: CODEC DAI infinity-codec-dai-main not registered
platform infinity-codec: Driver infinity-audio requests probe deferral
netif_napi_add() called with weight 128 on device eth%d
[EMAC]Init EMAC success! (add delay in reset)
[SCL] SCL init success
mload_size = 35040
mload_virt_addr = c3090000
mload_dma_addr = 0x23090000
AE Base: virt=0xC30A0000
AWB Base: virt=0xC30AB400
AF Base: virt=0xC30B3B00
MOT Base: virt=0xC30B3EE0
HISTO Base: virt=0xC30B3BF0
RGBIR Base: virt=0xC30BAD20
[ISP] register driver success
[CSI] register driver successms_rtc 1f002400.rtc: rtc core: registered 1f002400.rtc as rtc0
[ms_rtc_probe]: rtc setup, frequency=12000000
[SAR] infinity_sar_probe
[Ser flash] phys=0x23046000, virt=0xc3046000, bus=0x03046000
[FSP] MXIC REMS: 0xC2,0x16
[FSP] Flash is detected (0x050A, 0xC2, 0x20, 0x17) ver1.1
[FSP] 1-1-2 DUAL_FAST_READ MODE
mtd .name = NOR_FLASH, .size = 0x00800000 (8MiB)
.erasesize = 0x00010000 .numeraseregions = 0
MXP_PARTS!!
MXP found at mxp_offset[0]=0x00003000, size=0x1000
8 cmdlinepart partitions found on MTD device NOR_FLASH
Creating 8 MTD partitions on "NOR_FLASH":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x0000001e0000 : "kernel"
0x0000001e0000-0x000000460000 : "rootfs"
0x000000460000-0x0000007c0000 : "app"
0x0000007c0000-0x0000007d0000 : "www"
0x0000007d0000-0x0000007e0000 : "para"
0x0000007e0000-0x0000007f0000 : "p2p"
0x0000007f0000-0x000000800000 : "log"
[ms_cpufreq_init] cpu current clk=796917760
TCP: cubic registered
NET: Registered protocol family 17
[mstar_pm_init] resume_pbase=0x203F94F4, suspend_imi_vbase=0xC90AE000
ThumbEE CPU extension supported.
infinity-audio soc:sound: infinity-codec-dai-main <-> infinity-cpu-dai mapping ok
ms_rtc 1f002400.rtc: setting system clock to 1970-01-01 00:02:29 UTC (149)
ALSA device list:
#0: infinity_snd_machine
Freeing unused kernel memory: 116K (c03d1000 - c03ee000)
init: SERVICE: ueventd
init: Unable to open persistent property directory /data/property errno: 2
init: SERVICE: log
init: SERVICE: rcs
: not found/init.d/log: line 3:
mount: mounting /dev/block/mtdblock4 on /plugs failed: Invalid argument
(none) login: mount: mounting tmpfs on /etc/ppp failed: No such file or directory
cp: can't stat '/ppp/*': No such file or directory
open the /dev/block/mtdblock6 sucessed
---------------------------------------------
producttype : RS-CH256MCC-36PW-M-PIR-SW
SenSorType: SC5035_5M
BoardType: RS-CM-211B
ChipType:
---------------------------------------------
=============24
cp /mnt/srcsensorlib/libsns_sc5035.so /mnt/sensorlib/libsensor.so
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
mstar notify driver install successfully
insmod: can't read '/lib/modules/usb-common.ko': No such file or directory
insmod: can't read '/lib/modules/usbcore.ko': No such file or directory
insmod: can't read '/lib/modules/ehci-hcd.ko': No such file or directory
insmod: can't read '/lib/modules/cfg80211.ko': No such file or directory
insmod: can't read '/lib/modules/mtprealloc.ko': No such file or directory
insmod: can't read '/lib/modules/mt7601Usta.ko': No such file or directory
rtc_ds1339 driver init successful(software:0)!
* rsSystemServer version:V1.1 *
listening ...
BANK:0xE 16bit-offset 0x09
0x0000
killall: boa: no process killed
here2,FuncCodeUsedFlag=USEDFC,pFuncCodeMagic=USEDFC
pFunctionCode =@
fun: LoadConfig, line: 241, 356MKB not ok
fun: LoadConfig, line: 252, 485 not ok
fun: LoadConfig, line: 269, mac in ok
here15,CustomTypeUsedFlag=,pCustomMagic=CUMTYP
AppVersion=V2.1.3.4_171220
AppVersion=.1.3.4_171220
[PARAM] <LoadConfigFile>(2030) Debug Info: DebugMode = 0
[PARAM] <LoadConfigFile>(2031) Debug Info: LanguageMaskExtend = 0x0
[PARAM] <LoadConfigFile>(2032) Debug Info: LanguageMask = 0x10
[PARAM] <LoadConfigFile>(2033) Debug Info: CurLanguage = 4
[PARAM] <LoadConfigFile>(2034) Debug Info: IECustomer = 23
[PARAM] <LoadConfigFile>(2035) Debug Info: AppVersion = V6.1.3.4_171220
[PARAM] <LoadConfigFile>(2036) Debug Info: IEVersion = v1.0.2.62_170713
[PARAM] <LoadConfigFile>(2037) Debug Info: RecToFileEnable = 0
[PARAM] <LoadConfigFile>(2038) Debug Info: IntelligentEnable = 1
[PARAM] <LoadConfigFile>(2039) Debug Info: ReFactoryEnable = 0
[PARAM] <LoadConfigFile>(2040) Debug Info: WifiEnable = 0
[PARAM] <LoadConfigFile>(2041) Debug Info: FtpEnable = 1
[PARAM] <LoadConfigFile>(2042) Debug Info: RtspEnable = 1
[PARAM] <LoadConfigFile>(2043) Debug Info: OnvifEnable = 1
[PARAM] <LoadConfigFile>(2044) Debug Info: EmailEnable = 1
[PARAM] <LoadConfigFile>(2045) Debug Info: DdnsEnable = 1
[PARAM] <LoadConfigFile>(2046) Debug Info: UpnpEnable = 1
[PARAM] <LoadConfigFile>(2047) Debug Info: PlatformEnable = 1
[PARAM] <LoadConfigFile>(2048) Debug Info: DstEnable = 1
[PARAM] <LoadConfigFile>(2049) Debug Info: NtpEnable = 1
[PARAM] <LoadConfigFile>(2050) Debug Info: DualTalkEnable = 0
[PARAM] <LoadConfigFile>(2051) Debug Info: IRCutEnable = 1
[PARAM] <LoadConfigFile>(2052) Debug Info: NetAdjustEnable = 0
[PARAM] <LoadConfigFile>(2053) Debug Info: FtpUpgradeEnable = 0
[PARAM] <LoadConfigFile>(2054) Debug Info: LogEnable = 1
[PARAM] <LoadConfigFile>(2055) Debug Info: AutoFocusEnable = 0
[PARAM] <LoadConfigFile>(2056) Debug Info: IPV6Enable = 0
[PARAM] <LoadConfigFile>(2057) Debug Info: NTSCFormat = 0
[PARAM] <LoadConfigFile>(2058) Debug Info: P2pType = 7
[PARAM] <LoadConfigFile>(2059) Debug Info: PushType = 1
[PARAM] <LoadConfigFile>(2060) Debug Info: WorkModeEnalbe = 1
[PARAM] <LoadConfigFile>(2061) Debug Info: IRISEnable = 0
[PARAM] <LoadConfigFile>(2062) Debug Info: KeyBoardEnable = 0
[PARAM] <LoadConfigFile>(2063) Debug Info: JPEGEnable = 0
[PARAM] <LoadConfigFile>(2064) Debug Info: AreaEncodeEnable = 0
[PARAM] <LoadConfigFile>(2065) Debug Info: UseRes2M = 0
[PARAM] <LoadConfigFile>(2066) Debug Info: UseParamControl = 0
[PARAM] <LoadConfigFile>(2067) Debug Info: UseElectricity = 0
<LoadConfig> (354) _IE_CUSTOMER_ = 7
[PARAM] Debug Info: FileName:./custom/SWANN_config!
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
[COMMON] Debug Info: find failed
Custom=0007,CurLang=0004,Language=00000010,LanguageExtend=
[MAINTHREAD] <LoadConfig>(382) Debug Info: IECustomer:7,CurLanguage:4,LanguageMask:10,LanguageMaskExtend:0
[PRODUCTTYPE] <ParseProductType>(48) Debug Info: ParseProductType OK
[PRODUCTTYPE] <ParseCameraType>(126) Debug Info: ParseCameraType OK
[PRODUCTTYPE] <ParseCameraApearance>(161) Debug Info: ParseCameraApearance OK
[PRODUCTTYPE] <ParseSensorResolution>(203) Debug Info: ParseSensorResolution OK
[PRODUCTTYPE] <ParseChipBrand>(244) Debug Info: ParseChipBrand OK
[PRODUCTTYPE] <ParseSensorScheme>(279) Debug Info: ParseSensorScheme OK
[PRODUCTTYPE] <ParseAudioFlag>(340) Debug Info: ParseAudioFlag OK
[PRODUCTTYPE] <ParseGlobalFunction>(361) Debug Info: ParseGlobalFunction OK
[PRODUCTTYPE] <ParseAutoFocusFlag>(384) Debug Info: ParseAutoFocusFlag OK
[PRODUCTTYPE] <ParseWDRFlag>(408) Debug Info: ParseWDRFlag OK
[PRODUCTTYPE] <ParseAFLensType>(424) Debug Info: ParseAFLensType OK
[PRODUCTTYPE] <ParsePOEFlag>(470) Debug Info: ParsePOEFlag OK
[PRODUCTTYPE] <ParseBOX485Flag>(487) Debug Info: ParseBOX485Flag OK
[PRODUCTTYPE] <ParseSensorAndChip>(505) Debug Info: ParseSensorAndChip OK
coming the initGPIO
[MAINTHREAD] Debug Info: InitGPIO success!
[WATCHDOG] Debug Info: hi_api_wdt_settimeout(60000ms)
[MAINTHREAD] Debug Info: InitWatchDog success!
InitSensorCfg sensorType=24, chipType=0
[PARAM] <InitSysParam>(34) Debug Info: m_pRsIpcParam.size = 53,RsIpcParam_t Size = 25792
FLASH 25792, UserName (admin).97.100.109.105.110.0).(123456).49.50.51.52.53.54)
[PARAM] <CheckSchedulePara>(3304) Debug Info: There is no need to check schedule para!
[PARAM] Debug Info: <ModifyCheckParameter> param type error,type:49
[PARAM] Debug Info: param type: 49 error!!
[PARAM] Debug Info: param type: 50 error!!
[PARAM] Debug Info: Save param to flash OK!
[MAINTHREAD] Debug Info: KEY:bootVersion=V140101 kernelVersion=V140101 rootfsVersion=V170829
g_S32UbootFd open failed(/dev/mtdblock0)
g_S32KernelFd open failed(/dev/mtdblock1)
g_S32RootfsFd open success rootfsversion.conf
[MAINTHREAD] Debug Info: READ:bootVersion=V140101 kernelVersion=V140101 rootfsVersion=V170829
[MAINTHREAD] Debug Info: keyParam.DeviceName=NHD-865, DeviceType=NHD-865
[MAINTHREAD] Debug Info: keyParam.ClientPort=9988, WebPort=80
[PARAM] Debug Info: Save param to flash OK!
[MAINTHREAD] Debug Info: InitSysParam success!
<HttpFunctionSwitch>:(12),
<HttpFunctionSwitch>:(12),
<HttpFunctionSwitch>:(12),
[MAINTHREAD] Debug Info: datetime:2015, 1, 1, 9, 45, 21
=============timezone = 13
[COMMON] Debug Info: timezone env:GMT-8
[MAINTHREAD] Debug Info: InitRtc success!
[MAINTHREAD] Debug Info: InitLog success!
[MEDIA] <ViDevAttrCfg>(96) Debug Info: !!!!!*****************************ViDevAttrCfg
[MEDIA] <GetViVpssWorkMode>(1463) Debug Info: Msc Platform Do not Support Get Vi Vpss Work Mode
[RSOsd]: open font(/mnt/font/yahei_arial_gothic_unicode_19_50.qpf2) success !
[MI_SYS_Init]MI version:MVX2####g9ddb145MI##########[BR:I3/sz0608]#XVM
[MI_SYS_Init]MI log level:2
[MI_SYS_Init]MI log module:0xffffffff
init: save mstar property to /data/mstar.prop
random: init urandom read with 10 bits of entropy available
<6275 ms> OMX[100] OMX log level:1
<6275 ms> OMX[100] OMX log modularfilter :0
<6275 ms> OMX[100] enable memory leak check!
mi-info: ISP_Wraper_init
mi-info: bShrinkMem:1
mi-info: _MI_OSD_Init_Prop gop_use:0
mi-info: OmxComponentCreate: name = OMX.mstar.video_src.camera.vjpg
0x1,0x1
[ISP]MaxWidth=4096
mclk ISP_27M
[DMA]: Transfer NOT Completely!
ERROR: Bus[1] in ms_i2c_xfer_write: Slave dev NAK, Addr: 0x60, Data: 0x31 0x7
Read RegisterPair set register: Connection timed out
[DMA]: Transfer NOT Completely!
ERROR: Bus[1] in ms_i2c_xfer_write: Slave dev NAK, Addr: 0x60, Data: 0x31 0x7
Read RegisterPair set register: Connection timed out
[DMA]: Transfer NOT Completely!
ERROR: Bus[1] in ms_i2c_xfer_write: Slave dev NAK, Addr: 0x60, Data: 0x31 0x7
Read RegisterPair set register: Connection timed out
[DMA]: Transfer NOT Completely!
ERROR: Bus[1] in ms_i2c_xfer_write: Slave dev NAK, Addr: 0x60, Data: 0x31 0x7
Read RegisterPair set register: Connection timed out
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ov4689_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov4689_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_imx123_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_imx123_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ar0237.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ar0237.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_sc2135.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_sc2135.so
mclk ISP_36M
dlopen failed, libdrv_ms_cus_imx291_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_imx291_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ov2718_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov2718_MIPI.so
mclk ISP_21P6M
dlopen failed, libdrv_ms_cus_ov2735_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov2735_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ar0330_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ar0330_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ov4686_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov4686_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_BRV0500_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_BRV0500_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ar0237_RGBIR.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ar0237_RGBIR.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ov2775_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov2775_MIPI.so
mclk ISP_12M
dlopen failed, libdrv_ms_cus_POA030.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_POA030.so
mclk ISP_12M
dlopen failed, libdrv_ms_cus_imx326_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_imx326_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ar0521_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ar0521_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_OS05A10_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_OS05A10_MIPI.so
mclk ISP_12M
dlopen failed, libdrv_ms_cus_ov2710_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov2710_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ps5510_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ps5510_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_ov9756_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_ov9756_MIPI.so
mclk ISP_12M
dlopen failed, libdrv_ms_cus_BRV0200_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_BRV0200_MIPI.so
mclk ISP_27M
dlopen failed, libdrv_ms_cus_OS08A10_MIPI.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_OS08A10_MIPI.so
mclk ISP_12M
dlopen failed, libdrv_ms_cus_pattern.so: cannot open shared object file: No such file or directory
Failed to load libdrv_ms_cus_pattern.so
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
[src/drv_ms_isp_hal.c/CleanupHandler] Thread cleanup handler
ms_proc_munmap_device: handle argument is not a device
ms_proc_munmap_device: handle argument is not a device
ms_proc_munmap_device: handle argument is not a device
ms_proc_munmap_device: handle argument is not a device
ms_proc_munmap_device: handle argument is not a device
malloc count = 0
fopen count = 0
open count = 1
dlopen count = 0
<7265 ms> OMX[100] omx_videosrc_component_Constructor (line 1435) open camera failed <0x80001009>
<7265 ms> OMX[100] Error during component construction <80001009> for comp name <OMX.mstwatchdog watchdog0: watchdog did not stop!
ar.video_src.camera.vjpg>
<7594 ms> OMX[100] VSRC Port<0> Buffer Count: <2>
<7594 ms> OMX[100] MAX: <0> MIN: <0> AVG <nan> Qtimes <0>
<7595 ms> OMX[100] VSRC Port<1> Buffer Count: <2>
<7595 ms> OMX[100] MAX: <0> MIN: <0> AVG <nan> Qtimes <0>
mi-error: OmxComponentCreate:574 OMX_Wraper_GetHandle error:ErrorHardware
mi-error: [_MI_VI_Init:971] OmxComponentCreate err=ErrorHardware
mi-info: _MI_VI_Deinit Exit
mi-error: _MI_VI_Init: init failed
[MEDIA] <SysInit>(32) Debug Info: Mi sys init failed = -1
MEDIA VERSION: 2017-10-12 14:00:25 V01.00.03 MSC318 IPC_app_ch256_swann_170915
[MEDIA] Debug Info: printf Mi version is MS_API[MI_1.0.0]
[MEDIA] Debug Info: media initial sys success!
mi-error: MI_ISP_Init Cannot get hISPHandle.
[ISP] <Init>(601) Debug Info: MI_ISP_Init failed! ret=6
!!!!****** isp_type_Consumer_control=RS-CH256MCC-36PW-M-PIR-SW, Consumer=7
isp_type_Consumer_control CAMERA_type=0,CAMERA_Consumer=7
THE sensor lib version is box CH256 v1.4.2 20170802 11:57
[MEDIA] <GetViVpssWorkMode>(1463) Debug Info: Msc Platform Do not Support Get Vi Vpss Work Mode
[MI_VI_SetDevAttr 1659] err Invalid handle!
[MEDIA] <ViSetDevAttr>(55) Debug Info: set vi dev attr err
mi-info: MI_VI_SetChnAttr chn:0 width = 2592 ,height = 1944 , format = 5, mode = 0
[MI_VI_SetChnAttr 1732] err Invalid handle!
[MEDIA] <ViSetChnAttr>(88) Debug Info: set vi chn(0) attr err
[MI_VI_EnableChn 1793] err Invalid handle!
[MEDIA] <ViEnableChn>(124) Debug Info: enable vi chn(0) err
[MEDIA] <Convert2MiPixelFormat>(255) Debug Info: Not Support enRsPixelFormat=0
[MEDIA] <Convert2MiPixelFormat>(255) Debug Info: Not Support enRsPixelFormat=0
mi-info: MI_VI_SetChnAttr chn:3 width = 640 ,height = 480 , format = 5, mode = 0
[MI_VI_SetChnAttr 1732] err Invalid handle!
[MEDIA] <ViSetChnAttr>(88) Debug Info: set vi chn(3) attr err
[MI_VI_EnableChn 1793] err Invalid handle!
[MEDIA] <ViEnableChn>(124) Debug Info: enable vi chn(3) err
mi-info: MI_VI_SetChnAttr chn:4 width = 640 ,height = 480 , format = 5, mode = 0
[MI_VI_SetChnAttr 1732] err Invalid handle!
[MEDIA] <ViSetChnAttr>(88) Debug Info: set vi chn(4) attr err
[MI_VI_EnableChn 1793] err Invalid handle!
[MEDIA] <ViEnableChn>(124) Debug Info: enable vi chn(4) err
mi-info: MI_VI_SetChnAttr chn:5 width = 320 ,height = 180 , format = 5, mode = 1
[MI_VI_SetChnAttr 1732] err Invalid handle!
[MEDIA] <ViSetChnAttr>(88) Debug Info: set vi chn(5) attr err
[MI_VI_EnableChn 1793] err Invalid handle!
[MEDIA] <ViEnableChn>(124) Debug Info: enable vi chn(5) err
mi-error: _MI_ISP_StatusCheck hISPHandle invalid.
[MEDIA] <ViSetIspInputCrop>(222) Debug Info: vi set SetInputCrop err
[ALGO_MSG_ERR] [IaaAec_GetBufferSize] Working buffer size = 357196 bytes
[IaaApc_GetBufferSize] Working buffer size = 65620
Checking IC....
[APC] APC IC check pass. ver.2017.0718.0000
[APC] Point Number: 256
[IaaApc_GetBufferSize] Working buffer size = 65620
This platform has Neon.
FFT is floating point mode
¶z--------------------------------------------------------------------------------¶{
¶x ¶x
¶x NEON ENABLE ¶x
¶x ¶x
¶|--------------------------------------------------------------------------------¶}
[AGC] AGC IC check pass. ver.2017.0718.0000
[WNR] Working buffer size: 4140 bytes
sndchn = 0
[ALGO_MSG_MSG] [WNR] IC check pass. ver.2016.621.0
mi-info: PORT[1] on/off[0],line:4161.
mi-info: PORT[2] on/off[0],line:4161.
mi-info: PORT[3] on/off[0],line:4161.
mi-info: PORT[4] on/off[0],line:4161.
[RSOsd]: open font(/mnt/font/yahei_arial_gothic_unicode_19_50.qpf2) success !
----<Init>[38]m_u32FontMaxHeight = 28 m_u32FontMaxWidth = 28 ------
Creat queue id:0
queue id:0
onvif g_semId = 0, g_msgId = 0
------------> allready open max_fd 1024
========= discovserver.c line 1068 Enter onvif_scan
queue id:0
onvif g_semId = 0, g_msgId = 0
U-Boot 2015.01 (Jun 15 2017 - 09:54:33)
Version: I3g#######
I2C: ready
DRAM: 64 MiB
WARNING: Caches not enabled
MMC: MStar SD/MMC: 0
nor_flash_mxp allocated success!!
MXIC REMS: 0xC2,0x16
Flash is detected (0x050A, 0xC2, 0x20, 0x17)
SF: Detected nor0 with total size 8 MiB
MXP found at mxp_offset[0]=0x00003000, size=0x1000
env_offset=0x3F000 env_size=0x1000
MXIC REMS: 0xC2,0x16
Flash is detected (0x050A, 0xC2, 0x20, 0x17)
SF: Detected nor0 with total size 8 MiB
In: serial
Out: serial
Err: serial
gpio[16] is 0
Net: MAC Address xx:xx:xx:xx:xx:xx
Auto-Negotiation...
AN failLink Status Speed:10 Full-duplex:0
Status Error!
mstar_emac
MStar # <INTERRUPT>
MStar # <INTERRUPT>
MStar p
Unknown command 'hel' - try 'help'
MStar # help
? - alias for 'help'
base - print or set address offset
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
dbg - set debug message level. Default level is INFO
dcache - enable or disable data cache
debug - Disable uart rx via PAD_DDCA to use debug tool
dhcp - boot image via network using DHCP/TFTP protocol
dstar - script via SD/MMC
eeprom - EEPROM sub-system
env - environment handling commands
estar - script via network
estart - EMAC start
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fatread - FAT fatread with FSTART
fatsize - determine a file's size
go - start application at address 'addr'
gpio - Config gpio port
help - print command description/usage
i2c - I2C sub-system
icache - enable or disable instruction cache
initDbgLevel- Initial varaible 'dbgLevel'
loop - infinite loop on address range
macaddr - setup EMAC MAC addr
md - memory display
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - display MMC info
mssdmmc - Mstar SD/MMC IP Verification System
mstar - script via TFTP
mw - memory write (fill)
mxp - MXP function for Mstar MXP partition
net_upgrade- do net update from the specified file that is in tftpserver
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
riu - riu - riu command
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
sfbin - for uploading sf image to a server(via network using TFTP protocol)
srcfg - sensor pin and mclk configuration.
tftpboot- boot image via network using TFTP protocol
version - print monitor, compiler and linker version
MStar #
MStar # version
U-Boot 2015.01 (Jun 15 2017 - 09:54:33)
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) 4.8.3 20140401 (prerelease)
GNU ld (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) 2.24.0.20140311 Linaro 2014.03