New profile posts

Hi Sorry ik had hgeenmelding van je antwoord gekregen
Ik heb 5 tripwires

Password reset

Color4K T180 keeps freezing and losing signal

hi friend,
i have a vth1550ch-s2 and i flashed it with the wrong firmware same as you,
The problem was caused by flashing:

DH_VTHX421H_MultiLang_SIP_V4.410.0000000.4.R.20200221.bin
instead of
DH_VTHX421L... which is for this device.
and know its bricked, i can get any connexion working on it in NCOM or Putty or tftp server only a black screen and the red led of the power on the device, plz sir did you found any solution because i saw you have being in the same probleme before me.

Thanks

Reset password

kijk daar heb ik wat aan dank je wel. IK heb die instelling nu gevonden.
Was al een tjd op zoek

Krijg nog wel bij kanaal 1 een vreemde melding reached max capacity, met slechts 2 tripwires

I am looking for the best POE cameras for both outside and inside my house with BI
any recommendations? --No Reolink

hikvision DVR password

hi

hello my friends,
first sorry if my english is not very good, i have an indoor monitor dahua vth1550ch-s2 it was under firmware version V4.410.0000000.4.R.20200221 and i updated it with Nordic_V4.600.0000000.0.R.220819 firmware after extracting it we found two part of firmware part1 and part2 i update it with vdp config tool the update of part 1 stoped at 54% and my vth1550ch-s2 went on black screen now its bricked it wont turn on and when i pluged it into the lan cable there is no ip detected or any thing the only thing that show is the red led when i pluged it into power, I unsolder the eeprom ( gigadevice GS25Q127C ) i programmed it with CH341 with the firmware V4.410.0000000.4.R.20200221 and solder it back into the board but nothing hapened still the same problem, can u please post a video or more explain how to use this methode TFTP and TTL technique. i tried all and connect the rx tx gnd but cant have a response via putty or any thing else plz i need ur help.

Thank you.

Hey I’m looking hdw1430v Dahua to frimware. To work English Pliz help me

I have problem I buy camera Dahua dh-ipc-hdw1430v-a. With mechine Dahua English its not suport cam Pliz help I buy 24 cam no have idea

If anyone need Internet Explorer on Windows 11 or Windows 10 here you go.

hello brother .in which link are u talking about at this topic?
i have same problem to add ezviz

Не могли бы вы мне помочь? у меня ptz камера не работает после обновления((

hallo Kitoxel, has du eine andere Firmwaredatei bekommen für die FI9900p ? ich konnte zwar flashen,
habe nun zugriff auf die kamera, aber die firmware scheint nicht zu passen , denn sie bootet nur mit vielen fehlern.
und sie hat ihre Mac adresse bzw ihre ID verloren.
Das SD Recovern klappt nun auch nicht mehr. - Hast du deine FI9900p wieder am laufen ?
wie war der Filename des Files, was du von Foscam bekommen hast ?

flash_FI9900P_1.11.1.5_2.74.1.7_p1.bin diesen link hat mir foscam geschickt, um die "flash_FI9900P_1.11.1.5_2.74.1.7_p1.bin" herunterzuladen .....

I just bought a wscam HD CCTV tester and want to test a swann nhd-865msb camera through an 48v POE. It says the camera is ready. I am a newbe. How can I see video. What are the next steps.

Hi

I'm looking for firmware for dahua nvr7xxx with english, on forum link is death (link from topic dahua mod kit), will be appreciate if You send me some working link

Thanks

Don't see you post much anymore. I hope everything is okay and take care.

My new hikvision nvr DS-7108NI-Q1 is not detecting my ip cameras giving an error message "Network is unreachable" any help?