Mini outdoor PTZ : DS-2DE4A220IW-DE

TheWhiteKnight

Young grasshopper
Joined
Mar 8, 2017
Messages
81
Reaction score
10
My gray came stock with 5.5.0 luckily and 0 problems aside from that RTSP Auth being set to digest by default and the illegal login lock. Didn't have to use spacers in the mount but man I wish they mentioned the metric needed for those packaged expansion screws. It's just under a half inch but mistakenly (and stupidly) thought it was 5.5mm until I realized I was reading from the template for the camera haha but after getting stuck too many times I went and bought some 1/2" x 3" ones that are better designed for cinder block, I think the ones the mount come with are made for solid concrete. I had to use a grinder to cut the sleeves down to match and try my hardest to drill straight holes which is a bit challenging 20' high with a heavy rotary!

I too get some minimal lens flare from the sun etc but it's very acceptable imo. I didn't spring for the 3mp because apparently it's not worth the extra $ but if there was a 4mp I would have gotten it in a heartbeat. While the resolution isn't as clear as my other 4mp's the low light performance is so good I haven't had to use the IR once which is funny because the hidden IR was the main selling point for me as it should be very powerful.

Other than that I did have trouble getting the wires to fit inside the super tight space and worry I may be bending them too much. If it was an external wiring instead of straight through I would have used a junction box but whoever designed the mount could have done better. Make sure you pull any slack before tightening the bolts or it will catch on the wall if done later.

My only issue now is getting PTZ controls to work in BI. I've tried ONVIF and both Hikvision options but so far I can only control it directly in the camera, getting a PTZ: 12029: /onvif/PTZ log error
 
Last edited:

TheWhiteKnight

Young grasshopper
Joined
Mar 8, 2017
Messages
81
Reaction score
10
You need to create an ONVIF user account now. You can do that here: 2017-12-19_1703
Hey thanks, I assume it's a private account for local use only? Should I make it the same as the camera's credentials? While I have ONVIF enabled you're right I didn't have or knew I needed to make an account for it to work.
 
Last edited:

RyanODan

IPCT Vendor
Joined
Mar 10, 2014
Messages
626
Reaction score
266
Location
Tulsa
Honestly, I would make it different but a lot of people seem to forget their passwords so I'll leave it up to you.
 

TheWhiteKnight

Young grasshopper
Joined
Mar 8, 2017
Messages
81
Reaction score
10
Is that all of it? Anywhere i'm supposed to enter those credentials in BI after creating the account? I've saved it and still same error unfortunately.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Is that all of it? Anywhere i'm supposed to enter those credentials in BI after creating the account? I've saved it and still same error unfortunately.
What dropdown option are you using for BI? dahua rtsp or did you do a find inspect...find inspect would likely pull the onvif profile...
 

TheWhiteKnight

Young grasshopper
Joined
Mar 8, 2017
Messages
81
Reaction score
10
What dropdown option are you using for BI? dahua rtsp or did you do a find inspect...find inspect would likely pull the onvif profile...
I've tried every combination as far as I know but I did forget to switch it from the Hikvision RTSP drop down for video back to ONVIF after adding that ONVIF account. For PTZ it was on ONVIF but i've cycled through the two Hikvision options as well to no avail. Right now everything is set to ONVIF but while the camera controls are available in BI it just won't do anything and continues to report the log error.

After creating the account directly in the camera how does that help BI if it doesn't have the credentials I created?
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
I've tried every combination as far as I know but I did forget to switch it from the Hikvision RTSP drop down for video back to ONVIF after adding that ONVIF account. For PTZ it was on ONVIF but i've cycled through the two Hikvision options as well to no avail. Right now everything is set to ONVIF but while the camera controls are available in BI it just won't do anything and continues to report the log error.

After creating the account directly in the camera how does that help BI if it doesn't have the credentials I created?
i would try using the entering the onvif credentials in BI
 

TheWhiteKnight

Young grasshopper
Joined
Mar 8, 2017
Messages
81
Reaction score
10
I was confused at first as I thought there was no other place than video where you can do that while assuming that the same credentials to login to the camera directly must be the only thing entered there but I tried it anyway and it spazzed out loading all the presets. Works now thank you @fenderman ! My first PTZ hooray! :highfive:
 

FrankMCN

Getting the hang of it
Joined
Apr 14, 2017
Messages
142
Reaction score
57
Noticed firmware 5.5.2 on the main Hik uk site Hikvision UK & Ireland

Just installed on mine, will see how it performs.

  • Software Name:

    Baseline Firmware_PTZ_R7_V5.5.2

  • Software Size:

  • Software Description:



    1. Compatibility Update
    1) HIKCGI version: V2.0(Only STD Support);
    2) ONVIF version: V1612;
    3) ISAPI version: 2.4;
    4) Avigilon Control Center: V6.2.2.6;
    5) ExcaqVision: V8.4.2.111578
    6) Milestone:
    1) Milestone Enterprise 8.1a(2016 R2 10.0a), Milesstone drive version (Device Pack 9.1.9).
    2) Milestone Corporate version(10.2a), Milestone drive version (Driver 9.2.9).

    2. Newly added (Compared V5.5.0)
    1) Support 24 privacy masks
    2) Newly add Face Detection
    PTZ Cameras support Face Detection. But Face detection is mutually exclusive with third streams in some products, including PTZ-Nxxx, DS-2DE2xxx, DS-2DE3xxx, DS-2DE41xx, DS-2DE42xx, DS-2DE51xx, DS-2DE5225IW-AE, DS-2DE71xx. Third Stream can be enabled and disabled on System Service interface.
    3) The Default Tilt-angle of DE 7-Inch IR PTZ Camera is -5 Degree.

    3. Supported Model List

    Supported PTZ Dome Camera Model List (DFxxxxx)
    DS-2DE7225IW-AE DS-2DE7232IW-AE DS-2DE7320IW-AE
    DS-2DE7330IW-AE DS-2DE7120IW-A DS-2DE7130IW-A
    DS-2DE7120IW-AE DS-2DE7130IW-AE DS-2DE7223IW-AE
    DS-2DE7420IW-AE DS-2DE7430IW-AE DS-2DE7520IW-AE
    DS-2DE7530IW-AE DS-2DE5225IW-AE DS-2DE5225W-AE
    DS-2DE5232W-AE DS-2DE5320W-AE DS-2DE5330W-AE
    DS-2DE5120W-AE DS-2DE5120W-AE3 DS-2DE5130W-AE
    DS-2DE5130W-AE3 DS-2DE5430W-AE DS-2DE4215IW-DE
    DS-2DE4215W-DE3 DS-2DE4225IW-DE DS-2DE4225W-DE
    DS-2DE4225W-DE3 DS-2DE4225W-DE3 DS-2DE4415W-DE3
    DS-2DE4415IW-DE DS-2DE4120IW-DE DS-2DE4A215IW-DE
    DS-2DE4A225IW-DE
    DS-2DE4A204IW-DE(2.8-12mm)
    DS-2DE4A204IW-DE(8-32mm)
    DS-2DE4A320IW-DE
    DS-2DE4A404IW-DE(2.8-12MM)
    DS-2DE4A404IW-DE(8-32MM)
    DS-2DE3304W-DE DS-2DE3204W-DE DS-2DE3104W-DE
    DS-2DE2204IW-DE3/W DS-2DE2204IW-DE3 DS-2DE2106IW-DE3/W
    DS-2DE2106IW-DE3

    Supported Positioning System Model List (DYxxxxx)
    DS-2DY7236IW-A DS-2DY7236W-A DS-2DY7232IW-A
    DS-2DY7232W-A
    DS-2DY3204IW-DE(2.8-12mm)
    DS-2DY3204IW-DE(8-32mm)
    DS-2DY3204IW-DE4(2.8-12mm)
    DS-2DY3204IW-DE4(8-32mm)
 

FrankMCN

Getting the hang of it
Joined
Apr 14, 2017
Messages
142
Reaction score
57
Indeed, figured hik simply forgot to add it to the list or there isn't much in the way of changes for the A220IW - since there are a bunch of other's built on the same chassis figured it was worth a pop.
 

marku2

Known around here
Joined
Dec 23, 2016
Messages
919
Reaction score
263
Location
Australia
Indeed, figured hik simply forgot to add it to the list or there isn't much in the way of changes for the A220IW - since there are a bunch of other's built on the same chassis figured it was worth a pop.
I updated all of my r7 platforms it works well
 

bambi123

n3wb
Joined
Apr 3, 2017
Messages
20
Reaction score
8
I see the latest firmware has upgraded the ISAPI to 2.4.

Has anyone seen any documentation for ISAPI 2.4 in their travels??

Want my home automation system to change the image profile (night,day,nightfall) etc as the current time based settings via the website are too crude !!! I think the image profiles will make more sense if they were changed at sunrise/sunset/twilight/etc which my home automation controller is aware of.
 

bitmite

n3wb
Joined
Apr 9, 2017
Messages
7
Reaction score
5
Has anyone purchased the 3MP version, it doesn't seem like amandacams carries them?
 

MadamImAdam

Young grasshopper
Joined
Oct 20, 2015
Messages
65
Reaction score
9
@MadamImAdam, probably as good as your gong to get:DS-2DE4A204IW-DE Link ->Hangzhou Hikvision Digital Technology Co. Ltd. Looks to be the same camera with a 2.8-12mm lens assembly - I think 2.8-94mm is a bit of an ask at this price point. Can't guarentee it is exaclty the same for features like auto-tracking.

Is anyone using this camera? I would love to hear your opinion on it. I love the 20X zoom version, but just need a wider angled camera for strategic purposes.

ALSO: does this camera have auto-tracking features?
 
Last edited:
Top