reeves1985
Pulling my weight
- Joined
- Sep 13, 2015
- Messages
- 776
- Reaction score
- 241
Haha I knew you would!!Well I've bit the bullet and ordered the 1.3mp version after the advise from here.
Haha I knew you would!!Well I've bit the bullet and ordered the 1.3mp version after the advise from here.
From payment it took about 2 days to dispatch and then dhl took around 2 days to my door (may have been 3)I know I know How many days did the camera take to arrive Damien from the day you made payment?
If it's the hikvision module it should load hikvision firmware without any special prerequisites as its effectively a hik cam anyway.Does anybody know if we can use any of the Hikvision Firmware on the 2mp camera? I remember reading somewhere that somebody did this and it worked. Thanks.
Just to clarify: mine is the Hikvision Interface
That's what I thought, but I don't know which camera model to select?If it's the hikvision module it should load hikvision firmware without any special prerequisites as its effectively a hik cam anyway.
I might be wrong and am willing to be corrected
From the factory they are setup as 192.168.0.99Camera 1.3 wont get ip 192.168.1.128. I can see on my router it does not get an ip at all. How did you connect to your cameras? Its setup with gateaway 192.168.1.1 as in the manual provided here and the right subnet mask. Help!
Thanks. It worked. Now is there a plugin for mac? I can only download an exe file. Doesnt work with ivs4500 software. Whats the default port for the stream?From the factory they are setup as 192.168.0.99
Use sadp to detect and put the camera on the correct address for your network
Since the values are all blank, I bet you're using Safari on a Mac? I had this same issue and found everything is ok when I used IE under Windows.View attachment 6164
Why does my setup look blank? And when i click save nothing happends? Does it look like this in your settings?
call preset 95. read manual..How do i control the osd from the image in the manual?