PTZ fails after firmware update

xpertcrush

n3wb
Joined
Oct 6, 2021
Messages
4
Reaction score
0
Location
india
i tried changing speed using 65,66,67,68,69 calls but its 15 degree per second. not changing to 45
 

Hamiii

n3wb
Joined
Sep 30, 2021
Messages
1
Reaction score
0
Location
Morocco
hello all ,

i want to help how to low quality images (5mp to 2 mp)
name of ip camera PTZ 5MP -- IPC_XM550_R80X50-PQIPC_XM550_R80X50-PQ.png IPC_XM550_R80X50-PQ
 
Last edited:

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
hello my camera is escam qf288, factory update done, zoom feature and led lights disappeared, I especially need the zoom. Any chance you can send the old firmware?
my device: escam qf 288 (model with 2mp)
V5.00.R02.00030695.10010.343106.000000
xm530_r80x20-pq_8m
 

Oleglevsha

Getting the hang of it
Joined
Jan 25, 2015
Messages
299
Reaction score
77
Location
Россия г.Волгоград
[QUOTE = "Serki66, post: 602522, member: 119607"]
Здравствуйте, моя камера - escam qf288, заводское обновление выполнено, функция масштабирования и светодиодные индикаторы исчезли, мне особенно нужно масштабирование. Есть шанс отправить старую прошивку?
мое устройство: escam qf 288 (модель с 2мп)
V5.00.R02.00030695.10010.343106.000000
xm530_r80x20-pq_8m
[/ ЦИТИРОВАТЬ]
 

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
bellenim güncellenmiyor veya başarılı bir güncellemeden sonra herhangi bir donanım yok mu?
[/ALINTI]
bellenim güncellenmiyor veya başarılı bir güncellemeden sonra herhangi bir değişiklik yok mu?
[/ALINTI]
the firmware is not updated or there are no changes after a successful update?
updating but no change. it happens like this.
 

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
can update but no change. it happens like this. escam company does not answer any mail, phone, skyp. they are very uninterested. thank you so much for wasting your time for me
[/ALINTI]
updating but no change. it happens like this.
 

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
Hello friends, I just joined you. thank you so much for accepting me. I ask you to help. my camera is escam qf288 2mp model. My camera was bricked and I was able to reanimate it with my own means.via usb ttl method. but a problem arose. camera turns on and off. she talks like this. system starting up. I'am still factory settings. Please don't power off. i connect via usb ttl method. U-Boot > I type these commands. turns on and off in a vicious circle. I'm about to go crazy.
I am installing with ftfp. Software won't load because it opens and closes fast. installation can be done as uboot. I share printenv, bdinfo and boot images.
the last software i installed is V5.00.R02.00030695.10010.343106,000000
camera model: xm530_r80x20-pq_8m
I don't have ubuntu or linux. I do not know how to use it. If you direct with usb ttl method i will do it. I would be grateful to you all

can you help me on what to do.

my files

user-x.cramfs.img
uImage.img
u-boot.env.img
u-boot.bin.img
romfs-x.cramfs.img
InstallDesccustom-x.cramfs.img
InstallDesc
General_IPC_XM530_R80X20-PQ_WIFIXM711.711.Nat.dss.OnvifS_V5.00.R02.20210818_all.bin


files she requested from me

da=tftp 0x81000000 u-boot.bin.img;sf probe 0;flwrite
dc=tftp 0x81000000 custom-x.cramfs.img;sf probe 0;flwrite
dd=mw.b 0x81000000 ff 800000;tftp 0x81000000 mtd-x.jffs2.img;sf probe 0;flwrite
dr=tftp 0x81000000 romfs-x.cramfs.img;sf probe 0;flwrite
du=tftp 0x81000000 user-x.cramfs.img;sf probe 0;flwrite
dw=tftp 0x81000000 web-x.cramfs.img;sf probe 0;flwrite

tk=tftp 0x81000000 uImage; bootm 0x81000000
ua=mw.b 0x81000000 ff 800000;tftp 0x81000000 upall_verify.img;sf probe 0;flwrite
up=tftp 0x81000000 update.img;sf probe 0;flwrite

my commands

setenv ipaddr 192.168.1.10
setenv serverip 192.168.1.5
saveenv
reset
ctrl + c
ping 192.168.1.5
printenv
run da
mw.b 0x81000000 ff 800000;tftp 0x81000000 u-boot.env.img;sf probe 0;flwrite
run dc
mw.b 0x81000000 ff 800000;tftp 0x81000000 uImage.img;sf probe 0;flwrite
run dr
run du



when the camera is energized

U-Boot 2014.04 (Apr 08 2021 - 10:22:42)

CPU: XM530
WDT: 300S
DRAM: 64 MiB
MMC: arasan: 0
In: serial
Out: serial
Err: serial
Net: dwmac.10010000
Press Ctrl+C to stop autoboot
SF: 1572864 bytes @ 0x40000 Read: OK
## Booting kernel from Legacy Image at 80007fc0 ...u
Image Name: Linux-3.10.103+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1548688 Bytes = 1.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
XIP Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
▒▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒gF!▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒fF&▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒dUZ_▒▒▒▒dUZ_▒▒▒▒▒▒▒u▒▒▒▒▒▒▒u▒▒▒▒▒▒▒u▒▒▒▒▒▒▒u▒▒▒▒▒▒▒u▒▒▒▒▒▒▒u▒▒▒▒▒▒+▒▒▒▒▒▒V▒▒▒▒`Ii▒▒▒▒`y4꥕▒▒`xqX▒▒▒▒`o▒▒▒▒▒`Cַ▒▒▒fK>▒ʥ▒▒fK>▒ʥ▒▒fK>▒ʥ▒▒fK>▒ʥ▒ᨉ|▒▒ᩏs▒奔ᩏs▒奔ᩏs▒奔ᩏs▒奔ᩏL
▒▒ᩏL
▒▒▒▒▒E"▒▒▒▒E"▒▒▒▒▒[9▒▒▒▒▒[9▒▒▒▒뾥▒@rA@9H▒▒@rANR祗@rANR祗@rAN\U▒▒@rAN\U▒▒m▒▒▒▒!


bd info

U-Boot>bdinfo
arch_number = 0x000022B8
boot_params = 0x80000100
DRAM bank = 0x00000000
-> start = 0x80000000
-> size = 0x04000000
eth0name = dwmac.10010000
ethaddr = 00:12:41:c6:44:d9
current eth = dwmac.10010000
ip_addr = 192.168.1.10
baudrate = 115200 bps
TLB addr = 0x83FF0000
relocaddr = 0x83F96000
reloc off = 0x7BF96000
irq_sp = 0x83B85F40
sp start = 0x83B85F30
U-Boot>


printenv command

U-Boot> printenv
appNetIP=0x0A01A8C00x00FFFFFF0x0101A8C0
baudrate=115200
bootargs=mem=40M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=cramfs mtdparts=xm_sfc:256K(boot),1536K(kernel),1280K(romfs),4544K(user),256K(custom),320K(mtd)
bootcmd=sf probe 0;sf read 80007fc0 40000 180000;bootm 80007fc0
bootdelay=1
cramfsaddr=0x60040000
da=tftp 0x81000000 u-boot.bin.img;sf probe 0;flwrite
dc=tftp 0x81000000 custom-x.cramfs.img;sf probe 0;flwrite
dd=mw.b 0x81000000 ff 800000;tftp 0x81000000 mtd-x.jffs2.img;sf probe 0;flwrite
dr=tftp 0x81000000 romfs-x.cramfs.img;sf probe 0;flwrite
du=tftp 0x81000000 user-x.cramfs.img;sf probe 0;flwrite
dw=tftp 0x81000000 web-x.cramfs.img;sf probe 0;flwrite
ethact=dwmac.10010000
ethaddr=00:12:41:c6:44:d9
fileaddr=81000000
filesize=470000
ipaddr=192.168.1.10
mmcdev=0
netmask=255.255.255.0
serverip=192.168.1.5
stderr=serial
stdin=serial
stdout=serial
tk=tftp 0x81000000 uImage; bootm 0x81000000
ua=mw.b 0x81000000 ff 800000;tftp 0x81000000 upall_verify.img;sf probe 0;flwrite
up=tftp 0x81000000 update.img;sf probe 0;flwrite
Environment size: 1102/65532 bytes

I'm sending a video of how the camera works
 

Attachments

Last edited:

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
There is no person or company that makes such a malfunction in Turkey. you guys are my only hope.
 

kxn25

n3wb
Joined
Nov 22, 2020
Messages
5
Reaction score
0
Location
Deutschland
Ich habe die Kamera Modell XM530_R80X20-PQ_8M mit der Firmware V5.00.R02.00030695.10010.344506..ONVIF 2.41
Wie bekomme ich die Alte Frimware wieder auf die Kamera
V5.00.R02.00030695.10010.343106..ONVIF 2.41
Wo kann ich die Downloaden?
 

Oleglevsha

Getting the hang of it
Joined
Jan 25, 2015
Messages
299
Reaction score
77
Location
Россия г.Волгоград
Ich habe die Kamera Modell XM530_R80X20-PQ_8M mit der Firmware V5.00.R02.00030695.10010.344506..ONVIF 2.41
Wie bekomme ich die Alte Frimware wieder auf die Kamera
V5.00.R02.00030695.10010.343106..ONVIF 2.41
Wo kann ich die Downloaden?
 

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
[/ALINTI]
telnet ve rs232 erişimi artık mevcut değil
Ich habe die Kamera Modell XM530_R80X20-PQ_8M mit der Firmware V5.00.R02.00030695.10010.344506..ONVIF 2.41
Wie bekomme ich die Alte Frimware wieder auf die Kamera
V5.00.R02.00030695.10010.343106..ONVIF 2.41
Wo kann ich die Downloaden?
telnet and rs232 access no longer exist. I'm trying to do something with my own efforts. I ordered ch341a programmer. I will try to program and open the bios chip. Thank you so much
 

kxn25

n3wb
Joined
Nov 22, 2020
Messages
5
Reaction score
0
Location
Deutschland
Da steht "Es ist schon die neueste Firmware!"
Mein problem ist das ich in der iCSee App kein Cruse Controle mehr habe mit deiner Frimware!
 

Serki66

n3wb
Joined
Feb 21, 2021
Messages
10
Reaction score
0
Location
Turkey
[/ALINTI]
telnet ve rs232 artık mevcut değil
Aktualisieren Sie einfach die Firmware mit dem Web-Interface
[/ALINTI]
the device no longer turns on. but it was not updating from the web even if it opened
 
Top