Recent content by jaycanter

i'll try that Thanks

5.2.4.3 It did it again last night only difference was at 11:16 PM then it put 8:30 AM as 2nd photo

I have cameras set up to send me 10 images by email for alerts. Last night i had an alert and 1st image was dark out, 2nd image showed a image during the day when sun was shinning then the rest were all at night. all the images were at 11:30 PM except the 2nd one in color shows 6:40 PM. Any...

I would run several cables and use the switches. I have 18 cameras on my house feeding thru 1 cat 6 cable about 130ft to my garage out back then it is connected to a switch with another 18 cameras and the BI machine in the garage with no issues.

For BI to tag as a recording Set up onvif in the camera with same user and password and then setup pullpoint subscriptions in BI and it will show the alert as onvif

That helped it was there was no db after blue iris somehow it was gone. Thanks

I changed my hard drive out and copied everything over to the new one everything was working. After a few days the recordings stopped and I was only able to view a picture. When I went in found the storage drives full and once I deleted some clips it started recordings again. Again today noticed...

@bc99 They also have a 20 watt poe floodlight

Poe Ir PL-PoE-IR-6w PoE IR Illuminator ( mode B 24v ) with 802.3af passthru

Maybe this will work for powering 4 cams with poe https://www.amazon.com/dp/B0198H6EUK/?coliid=I1829D26JP3D7G&colid=2UUSBPH0PE5HF&psc=0&ref_=lv_ov_lig_dp_it

They have a board you can use on your own choice of lights. PL-POE-kit OEM PoE Conversion Kit

These are pass thru so you can use the camera cable PL-PoE-IR-6w PoE IR Illuminator ( mode B 24v ) with 802.3af passthru

You can get these pass thru PL-PoE-IR-6w PoE IR Illuminator ( mode B 24v ) with 802.3af passthru

I have found that the card disappears and a reboot or sometimes 2 it will show back up.

It's a toss up with ivs you have to set target ssizes properly or it'll trigger shadows. My ptz cams work with the Get events with PullPointSubscription But the domes I had to set up onvif to get some to work. Bi will show as an external alarm but sometimes it misses it