Search results

swapped power supply, nope still dead. removed board just to see, nope nothing visually burnt. its dead dead, beyond my knowledge n capabilities. wish they sold just the complete board but cant find one. guess its time to pony up the $$$$

Disconnected all drives. Nada. Tried new HDMI cables, vga also nada. I think the power supply in a 7416 might work. Haven't tried it though. Won't be back to the cabin for another week. I'm open to any ideas. A replacement seems to be in the $4-500 range :(

I think my nvr died, no display via hdmi or 15pin-vga cable. no login screen via pc and ipaddress, although lights on network plug do blink. hard drives have power n get warm but no noticeable spinup processor fan is ok several led on motherboard light up. seems power supply is ok but not...

This happens with both a usa dahua 4416 (non4k) and a AliExpress 4416-4k don't think either are S2. Only happens with my new 4433 c-a cameras not my 4431 c-a ivs cam. Ive searched every thread but found no responses to other with same issues. Can someone please enlighten me.. Pop-up msg...

AliExpress and newegg

Have u considered a dahua NVR instead of a desktop and BI??? 4-4431c-a cams. 4mp withaudio and IVS = $290 4216dahua NVR =$225 3tb hdd = $100 8 port poe switch = $75-100 Spool of cat 5 cable = $50 Expandable. Better resolution. pretty sure all 3 would be happy and close to budget.

I'm sure things have changed in the realm of digital locks and deadbolts so best u do some recent inquiry on the subject. At the time, several years ago.... Kwikset was one of the first to be reported as hacked. Mostly due to there use of only 5 buttons. I couldn't find any info on the...

Run a hdmi cable and a USB cable to your monitor. thru floor, wall, ceiling, gun safe. You can run USB -+20' maybe more for just a mouse. hide NVR where ever you want within accessible reach of hemi and USB limits..

Ive got numerous zwave outlets n relays installed, work great thru my alarm system and alarm.com. Thermostat too.. 3 Schlage digital locks although there not smart home connected. also a ct100 thermostat that's zwave. only issue is I've has 2 zwave ge outlets stop working. most of my other...

When you take away there credit cards. :)

Its not if but when.. lol

Glad u figured it out. My 4421c and 4431c models have a release button as one of the 3 catches.

Look for a small button on bottom ring.

3.210.0002 did the trick on my 4216-4k from Ali. Next is the main box 4416-4k from a USA vendor. I'll update it once I get the smash n grab box setup unless the 2 don't play nice together.

So to start a list of FW that does or doesn't support IVS 4xxx-4k model 3.210.0002.0, Build Date: 09-28-2015. IVS YEs. Nary posted pg5 4k no IVS support 3.210.0001 1-24-15 3.210.0005 4-26-16 Non 4-k 4xxx models IVS suported General_NVR4xxx_Eng_PN_V3.201.0000.0.R.20151120.bi n. Fastb...

No IVs thru web ui or GUI with HDMI. I checked both ways. When I requested updated firmware for my other NVR the contact noted they roved some features and they recommend the .0002 firmware for the 4xxx 4k NVR. Nayr if u wanna try what version you have I was sent .0002 9/15. Be glad to share if...

After no contact or reply I ordered a 4216-4k thru the Ali link nayr posted. Came with few 3.210.0005 dated. 4-26-16 Connected a 4431c and a 4421c to it and no IVs features were present on NVR. Also got a copy of the fw from 9-28-15. Guess I'll be down grading fw. Both cams have full IVs...

Nayr. I don't think 3rd party really matters. I have a dahua7416 and a 4416-4k and with both connected some would sync to 1 or the other and all would drift 2-+ min every 30 days. No NTP sync only sync to my PC was used.

"sync to NTP" needs chkd if you want it to sync to your NTP server. Then click save and confirm before closing window. Also clik sync PC if you want it to sync to your PC then clik save. Make sure you see "settings saved" at bottom before leaving that screen. As for NVR, I assumed you...

What NVR are you using. If you have to NVR's they may do this. Check the "general" settings section for a chk box that tells the NVR to control ip cam time stamp.

I would suspect you added them twice. You can add any camera as many times as you want. just click the red X and remove them.

Mine were pretty quiet at first but after a few months the fan seems to get a little louder. Not annoying loud but noticeable in a room without background noise.

LoL That's cousin Eddy

Fastb yes I agree. Someone could make good money even just supplying updated firm ware. A curious question I f u don't mind. Which cam did u have to upgrade ??? The 2 4431c I installed replaced 2 4300s. I've only got 1 4300s left and it really isn't a priority location so I may u unplug...

So far I've gotten no reply to emails from the USA retailer I bought my NVR. there about to get ousted for non existent post sales support. isn't that the reason for buying USA and not imports. rant over.. Quick question for those with IVS working on there NVR.. Are all your cameras Smart...

Yes, Note the time stamps may differ over time, 1 sec a day or so. Also any motion detect settings changes must be done in the cam web ui. Be sure to change the IP of the NVR, If it has 2 Lan ports change both as not to conflict with 1st NVR.

If you haven't changed the pswd the default is admin, admin, also try 888888, 888888

I reenabled the startup wizard and looked all over for a IVS check box but found nothing. I emailed my US supplier but no reply yet, gonna email them again with more detailed Info and request updated firmware. been a busy week for me. Hopefully I can resolve this easily

finally got around to putting up 2 ivs capable cams "4431c" and playing with linc crossing on cam ui. But its not showing on my 4416-4k nvr. What firm ware is runnig on yur NVR's. Mne seems to be a build from 1-2015. 3.210.0001.0

Did you set your computer or laptop within same ip range as camera