Search results
-
Funny / Satire
Give me a loud, dirty, fight club, Waffle House for breakfast any day. -
DH-SD6AL433XA-HNR Tracking Issues
Agree 100% on the yardsticks, and I've increased my sensitivity on all the cameras as well. They are working great, thank you, Bigredfish, for all your help and for posting your camera settings. Also, thank you, Wittaj, for your reply and advice. Both of you have been tremendous help to this... -
DH-SD6AL433XA-HNR Tracking Issues
All I can say is WOW! Thank you, Bigredfish, for sharing your camera settings. I copied your settings, and both PTZs are tracking better than when they were new. I'm wondering what the effect of your bitrate of 12288 versus mine at 8192 may have contributed to some of the issues? Thank you again... -
DH-SD6AL433XA-HNR Tracking Issues
Thank you, gentlemen, for your replies and suggestions. I haven't done a factory reset yet since I'm still trying to diagnose, but interesting results from testing yesterday at sundown. The PTZs had switched to black and white, and both 433 PTZs tracked perfectly. In the B/W mode, while the sun... -
DH-SD6AL433XA-HNR Tracking Issues
Thank you, Wittaj and Bigredfish, for replying. I did make some adjustments to the image to make it more distinguishable, but I still have some tracking issues. The main problem is that once the target is identified and locked on, within 2 seconds of acquisition, the camera loses the target and... -
DH-SD6AL433XA-HNR Tracking Issues
I'm checking to see if there may be a firmware upgrade that would correct some recent tracking problems that have arisen on one of our PTZs, DH-SD6AL433XA-HNR. Maybe someone who has the same or a similar PTZ has run into the same issue and has a fix. The PTZ is wandering and losing its target... -
Networking NVR with 2 Switches - Unsuccessful to Date, Need Help
Problem: Dahua Switch is not being recognized by Dahua NVR. I have tried plugging the Dahua PFS4226 switch uplink ethernet cord into the second NVR RJ45 uplink receptacle with no success but when plugging the Dahua switch uplink ethernet cord into the Cisco 110 Series switch the NVR connects to...- Captain_B
- Thread
- Replies: 2
- Forum: Networking
-
Replaced NVR with new NVR and Cameras say "Failed to find Network Host"
Thank you for the quick reply Flintstone61. Using the old NVR I was able to get one of the 3 cameras to go back to factory default since none of the 3 cameras allowed me to modify their IP address. The second camera went to factory default but kept its NVR-assigned IP address 10.1.1.x and I...- Captain_B
- Post #8
- Forum: NVR's, DVR's & Computers
-
Replaced NVR with new NVR and Cameras say "Failed to find Network Host"
Thank you Mark M and Flintstone61 for your responses and great suggestions. I was able to get 12 out of 15 cameras batched IP change using the Config Tool. I'm going to connect the old NVR to the 3 that don't show up to see what's up with them and get their IP addresses so I can manually...- Captain_B
- Post #6
- Forum: NVR's, DVR's & Computers
-
Replaced NVR with new NVR and Cameras say "Failed to find Network Host"
Mark: Thank you for your reply and help. You are correct "Camera IP address is in the wrong subnet to the NVR, e.g cameras are on 10.1.1.x and the NVR is on 192.168.1.x.". The old NVR had the cameras directly connected to the NVR and changed the cameras to 10.1.1.X and the new NVR has the...- Captain_B
- Post #3
- Forum: NVR's, DVR's & Computers
-
Replaced NVR with new NVR and Cameras say "Failed to find Network Host"
I was running a Dahua NVR5216 but due to its limited bandwidth, I upgraded to a NVR608H-32-XI using a Dahua switch PFS4226-24ET-240 plugged into the NVR RJ45 port and an ePoE switch (EmpireTech 10-Port Unmanaged Switch with 8-Port ePoE) plugged into the second RJ45 port of the PFS4226-24ET-240...- Captain_B
- Thread
- Replies: 8
- Forum: NVR's, DVR's & Computers
-
PTZ Tracking Resets to Preset when Person Stops Moving
All great points I never thought about, "as is" sounds best and I agree with Wittaj, more spotter cams are the best solution for any blind spot outside of the PTZs presets. Thank you guys for your replies, much appreciated. -
PTZ Tracking Resets to Preset when Person Stops Moving
I am trying to have the PTZs continue to track a person even after they have stopped moving for more than 10 seconds. I find that when a person stops moving for 5 to 10 seconds the PTZ will go back to its original Preset settings and then when the person moves (if they're in the initial Preset... -
DAHUA NVR REPLACEMENT
I am running the 5216 presently but due to its limited bandwidth, my 8MP cameras have exceeded its ability. Below is what I have on order with Andy to upgrade what I have now. NVR608H-32-XI (Network Ports: 2 (10/100/1000/2500 Mbps Ethernet port, RJ-45)) PFS4226-24ET-240 (Port 25-26: 2 × RJ-45...- Captain_B
- Post #2
- Forum: NVR's, DVR's & Computers
-
Need Help - Networking a NVR608H-32-XI with 2 Switches
I ordered the following items from Andy and need advice on how to properly connect the 2 switches to the NVR and the NVR to my LAN switch (Cisco CBS 110 16T) to maximize performance (bandwidth). NVR608H-32-XI (Network Ports: 2 (10/100/1000/2500 Mbps Ethernet port, RJ-45)) PFS4226-24ET-240... -
Need Help - Weird kbps Issue with PTZs
I took the NVR (NVR: NVR5216-16P-I) and router down to the other building where the PFT1200 is that feeds the SD8C845FG camera. I connected only the SD8C845FG camera to the NVR with no other cameras connected and plugged it into its original #6 RJ45 port on the NVR and had no changes, the video... -
Need Help - Weird kbps Issue with PTZs
JDreaming, Wittaj, Flintstone61: I'm thinking the same thing, something is limiting the throughput of the camera. I have 15 cameras on a 16 port NVR consuming on average 114,700 kbps on an NVR bandwidth capacity of 320 Mbps (160 Mbps when AI function is enabled). I have unplugged 4 of the 4k... -
Need Help - Weird kbps Issue with PTZs
I did a default reboot using the camera's GUI but no difference in performance. I'm wondering if the NVR may be the problem, the reason I say that is I have two SD8C845FG-HNF PTZ cameras, the older one has been up for almost a year and working perfectly since it was installed. The difference... -
Need Help - Weird kbps Issue with PTZs
The issue: very choppy video, especially when PTZ moves and zooms in, on the camera's GUI clock the time skips 2-5 seconds forward as well. Details: Comparing the two SD8C845FG PTZs at different locations on the property, the first (location 8) operates at 10,250 kbps while the second... -
Camera IR Illuminator does not Separate Day and Night
BRF: I think you are describing the light sensor as the "Electrical ICR" setting in the "Day & Night" setting. I'll try and see if there is a way to check this evening before dark to see if the IR is on, I'll let you know. Thanks again for the help. -
Camera IR Illuminator does not Separate Day and Night
BigRedFish: Concerning the "light sensor", how can I make sure the cameras are setup correctly so the light sensor is active? Thank you and wittaj for your responses and help, very much appreciated. -
Camera IR Illuminator does not Separate Day and Night
wittaj: Yes sir, I have an older computer I never allow to upgrade to Edge. -
Camera IR Illuminator does not Separate Day and Night
The camera is a SD6AL433XA-HNR. Recently I have had trouble with both of them so I did a default reset via the camera GUI. I set the schedule for day and night in the GUI Profile Management under Settings/Camera/Conditions. All other Conditions change when Night or Day is selected but the IR... -
5241 Averaging 70,000 kbps on Main Stream
CanCuba: Thank you and I'll keep you posted. Mike A.: I checked that and both (NVR & SmartPSS) are Kbps and none of the other cameras are doing this, only the one. -
5241 Averaging 70,000 kbps on Main Stream
I am watching a side by side comparison of SmartPSS versus directly connect to the camera through the NVR, and SmartPSS is 70,000 Kbps and the camera direct through the NVR is only 6,500 Kbps. Why such a difference? CanCuba, none of my cameras have ROI enabled, thank you for the reply, it's... -
5241 Averaging 70,000 kbps on Main Stream
No sir, it's in the woods looking at an approach of a trail. The ones in the field with leaves and blowing grass only run 9,000 kbps. Thank you wittaj for your response. -
5241 Averaging 70,000 kbps on Main Stream
I run eight (8) 5241s and I have one that is running between 60,000 to 80,000 kbps and it is set up exactly like the others that average 9,000 kbps on Main Stream, any ideas as to why? Thank you for your help. -
SD8C845FG-HNF 8MP 45x 1/1.2'' CMOS Dual Light Fusion Electronic Defog Network PTZ Camera
Thank you guys for all the help to PRSmith777 on his camera setup since I have the same one and haven't had time to dial it in. Using your suggestions I will begin tonight taking it off of auto and making the same adjustments to mine. -
What are the latest Dahua PTZ models to look into?
wittaj: I would have to go out and move vehicles around so they remain off the camera and I'm somewhat busy this evening, hopefully tomorrow. -
What are the latest Dahua PTZ models to look into?
Running IR, B/W, Auto Exposure.