Search results

T84a yes they were available but I couldn’t get it working. I need to take a break from this for a while but I’m going to double check everything tomorrow. Talk to ya later and thanks again.

Well t84a. I did a variation of what you suggested. After a little trial and error I was able to get things working sort of. Apparently this modem can’t be bridged at least the way I was thinking. I turned off the WiFi in the VisionNet modem/router and ran a cable to the Asus router and a cable...

T84a I will do just that. I have several of these router/modems because of my lightening problems. Always have a spare handy. Would be great if this works. Thanks

TonyR it never crossed my mind my modem wouldn’t work. I’ll check with Comporium. I rather not buy from them as they are very expense through them. I’ll research a new modem also. Any suggestions on a DSL modem even if it’s a combo? Thanks again for the help.

I haven’t changed anything in the modem as of yet. I did try changing a few settings but they didn’t work either. When I use SADP it comes up with same addresses. But these are the ones I originally assigned.

TonyR and t84a thanks for the info still working at it. My modem is a VisionNet, model: M505N. This is a combo DSL modem router. The only thing I found about bridging in the modem software was under wi-if-bridge. In settings are AP mode with two choices 1) wireless bridge 2) access point. The...

TonyR I didn’t turn off routing in the old unit just connected it per instructions from Asus to new router. I want the old combo to be just a modem. I want everything channeled through the new router. How would I turn off routing in old modem/router and leave DSL active. Would I then need to...

Thanks alastairstevenson. I do use SADP and that’s where I got the IP addresses using the old router. I used the exact IP addresses in BI setup but it didn’t recognize any of them. I’ll to try and figure out a new range. Still not sure if I don’t need to change anything in the DSL modem as I...

I’m not able to connect with my cameras after installing new router. The router is a Asus AC1900 Dual Band. I have it connected to my combo DSL router/modem. One cable from modem to router and another from router to cpu via Ethernet cable. All my devices are working as far as WiFi goes. I...

Like I said originally my post is about your return policy. But you have me out numbered by likes so you must be correct and me wrong. You have the final words on the matter.

SLC keep an open mind when you read a post such as this. You would think Nelly’s response to this matter is unique. Well it isn’t,it’s a typical/atypical, pending your level of cynicism, business response. This whole situation should have been resolved in my lengthy conversation I had with...

NoloC you can play all the game words you want. What I do with my money is my concern. My post relays an experience with a business that’s all. Read into what you want and make of it what you want you seem to be good at that.

NoloC I have already commented on the switch in other posts. My problem with the other switches you mention was my problem not the switchs. All documented in other posts. I’m not stupid as you suggest I know when something is defective. Your opinion of customer service is your opinion; others...

I recently purchased a POE switch from Nelly’s. It was defective right out of the box; no big deal things like this happen. In total I paid, with shipping, $195.77, for the switch. The switch was shipped back and my account was credited $162.02. They charge additionally for return, another...

Thanks srglassw didn’t even think of that; I’ll have to do some research.

Much appreciated. I was thinking a different way. So from what your saying it will trigger a snapshot immediately but won’t fire again for 10 minutes if it’s still in the original triggered state even thought more triggers have occurred in that 10 minute period? Have I got it? I do understand...

Well Tyler you could have been a little more honest with your response. No harm telling people you are the CEO of a company that sells passive products. Try a different approach next time.

Below are my settings for JEPEG snapshots. I was trying to setup so only snapshots were taken when the camera was triggered. About 10% of the time this happens but none are taken for short duration triggers. Is there a minimum time a trigger must occur before a snapshot is taken? It appears it...

Just out of curiosity what does your problem have to do with the original question or am I missing something?

I have three identical Hikvision turret cameras all with the same settings in BI and on camera. All are in profile 1. No scheduling activated. I have the latest version of BI installed. One camera works great with triggering, recording and alerts etc. The other two do not. I can manually take...

I do want to see alerts but only on a couple of cameras not all. Right now the only thing I see in the time line is a single red bar. I have the alters figured out for what I want to see. However the cameras set to continuous don’t show activity for a particular time. I don’t want to have to...

I trying to get BI to show when activity occurs on the time bar but not show it in the alerts list on the right side of BI. I figured how not to show on the alerts list but haven’t figured how to get it to post activity on the time bar. I have the cameras set to continuous record but only want...

Sorry I can’t find anything that resembles what you posted. There many many menues and submenues with much information. It has the capability of setting up a VPN tunnel and many other things.

I can do that. I’ve been there a bunch of time. How do you take a nice picture of the information like yours?

When I say they provide it; I pay from them. There kind enough to break it up into monthly payments which seems to be a forever thing. The one I have now is damaged so I need something new anyway so I figured I’d get something better. They only provide visionNet modems.

Bp2008 Thanks not interested in saving $60 bucks and losing more of what little hair I have left. It’s the seperate devices that I having the problem with so the combo is looking better by the day.

alastairstevenson I have a dsl/router combination. On the back it says ADSL2+ 4 ports w/usb. It’s the one supplied by the telephone company. It’s a VisionNet. It’s the eight one in seven years with the others destroyed by lightning. This one was only half destroyed. No cable is available where...

Looney2ns this Router looks fine and if you say it’s good that’s enough for me. Now the modem, it doesn’t appear ASUS makes JSU a DSL modem. I call my provider and they say I can buy what I want they don’t have a list. The person wasn’t very knowledgeable he only knew about 5he Router/modems...

Should I leave the bite rate as constant or variable in the cameras setup. Thanks

DMZ disabled thanks Mr. F Q if the only way to to do this safety is a VPN then that’s what I’ll do, eventually. Right now I’m moving on to something a bit simpler. The rest of what you said is Greek to me, not surprisingly. As far as instant joy, that would be nice but that’s not happening on...