hikvision

  1. vbhoj74

    Can my I-Series NVR record & playback at 60/50 FPS ?

    Hi, I've a very specific requirement for recording 4MP @ 50FPS and synchronous playback of upto 4 channels. I'll be using iDS-2CD7146G0-IZS camera, and I've been suggested DS-7608NI-I2 NVR by my local Hikvision rep. But I can only see the below specs under decoding of the NVR: Synchronous...
  2. Stealthor

    Unable to get Live View in IVMS-4200

    Hi, My first time posting here so please let me know if wrong area/format .. etc I can no longer get a Live View of my HikVision door station. DS-KV6113-WPE1 in IVMS-4200. When I click on Live View in IVMS-4200 i see two messages: Door station_intercom controlling PTZ failed. It is not...
  3. W

    EZViz uart socket

    Hi, I want to connect via UART to EZViz C4W camera, but connector is quite different than in Hikvision camera. Does anyone know what type of connector it is?
  4. T

    LPR Planning - Hikvision DS-2CD7A26G0/P-IZHS8

    I am considering installing dedicated LPR cameras around my property, and am currently in the planning stages. My current system is made up of 12 Hikvision Colorvu cameras, and a Hikvision NPR. I live in a single plate state, at the corner of a T intersection. Due to this, I'm planning on...
    • Torque
    • Thread
    • ds-2cd7a26g0/p-izhs8 hikvision lpr
    • Replies: 7
    • Forum: LPR
  5. D

    Hi. Here to learn about Hikvision and other doorbell cams

    Howdy. Dave here. Glad to find this forum. I need to learn more about doorbell cams. I was looking at a Hikvision small PoE Door Station (DS-KV8113-IME1). I'd like to buy from my regular electronics store (which carries a lot of stuff/ and almost every brand), so I can get help if anything...
  6. M

    Hikvision DS-2DE3A400BW-DE ColorVu - hardware reset button

    Hope this thread is helpful to someone. I ordered a used Hikvision camera from a reputable, authorized US dealer (I'll leave them anonymous for now) and found that it had not been factory reset! It had a non-standard IP address and had an administrator password set. I was essentially locked out...
    • mrfusi0n
    • Thread
    • ds-2de3a400bw-de hikvision reset
    • Replies: 1
    • Forum: Hikvision
  7. M

    Hikvision DS-7204HGHI-K1/7208HGHI-K1 HILOOK 104G-K1/108G-K1

    Attention to these models, they belong to a new platform that has a very important hardware limitation: There is no transmission capability in different streaming, this is uncomfortable when the client uses the Hik-Connect application and also makes use of the iVMS-4200 software for windows, or...
  8. A

    Hikvision PoC DVR Firmware V4.20.002 Build 210705

    I noticed there’s a newer firmware, V4.20.002 build 210705, for the Hikvision PoC DVRs. Prior to this the most recent firmware was V4.20.001 build 190430. The firmware is not available on the portal sites yet but is instead on the global Hikvision site, just listed under the product...
    • aamuk
    • Thread
    • dvr firmware hikvision poc
    • Replies: 0
    • Forum: Firmware
  9. Alexandre Martins

    NVR DS-7108NI-Q1 / M RTSP get picture

    Hi, I'm trying to capture image from cameras that are already being shared by RTSP. How do I get only one preview of each camera? I tried multiple URLs: http://user:pass@ip/ISAPI/Streaming/channels/102/picture?snapShotImageType=JPEG http://user:pass@ip/ISAPI/Streaming/Channels/102/picture...
  10. S

    <SOLVED> Notification for whenever a home router is switched off - is there an easy method?

    Our Hikvision IP cameras are installed at remote properties and the easy way to disable them is to simply switch off the router. Is there any simple method of creating an alert when a router is switched off?
  11. R

    Hikvision NVR with Axis IP camera/ONVIF Issue

    Hello I have a Hikvision DS-7732NI-I424P and an Axis P1405-LE MK II The main stream is working fine but I can’t get the sub stream to work. Does anyone know the details of the built in Axis Protocol? I can create a custom one but will need the original one as reference. Alternatively, the...
  12. charles321

    ANNKE NVR B48PBB - cloud storage and change firmware to Hikvision.

    Hello. I bought Annke PoE set with NVR N48PBB. I am disappointed because I can't find the option of recording on the cloud , e.g. google drive. For me, there is no "cloud storage" tab, which is on other Hikvision devices. If there is no such option for this recorder, is it possible to install...
  13. Mihaitz222222

    Hikvision analog camera signal issues.

    I have an analog camera connected via ethernet cable using something like this. A few weeks ago i bumped the cable slightly and it started having issues. I made sure everything is connected properly but there are still issues. What confuses me the most is the fact that 50% of the time it works...
  14. C

    Hikvision DS-7608NI-I2/8P blinking green power light/blinking red LED on motherboard.

    Hello fellow security camera techies. I own one Hikvision DS-7608NI-I2/8P NVR which works great. I purchased a 2nd Hikvision DS-7608NI-I2/8P used. However the 2nd one won't boot up. Upon plugging it in and flipping on the back switch, the front panel "power" LED blinks. Upon opening the...
  15. LoneEdge

    DS-2CD2386G2-ISU LED always on at night?

    Hello I purchased a new camera 8MP DS-2CD2386G2-ISU I was wondering if its possible to keep the LED light on during the night instead of using IR. I have a DS-2CD2347Gl-LU and the LED light stays on all night and turns off in the morning is there anyway to do this with my other camera...
    • LoneEdge
    • Thread
    • ds-2cd2386g2-isu hikvision led
    • Replies: 11
    • Forum: Hikvision
  16. narutoninjakid

    ECI-D14F4 Dome Camera ( No Rotate option in iVMS-4200 or Camera Config), Rotate lense/Image Possible?

    Hello Everyone, I bought this camera and installed it. Where it is mounted I am trying to rotate the image so it an be seen properly at a glance. I logged into the Camera itself but there is no rotate option within the firmware of the camera. No updated firmware on Hikvisions site either. Any...
    • narutoninjakid
    • Thread
    • dome camera help eci-d14f eci-d14f4 hikvision hikvision dome
    • Replies: 5
    • Forum: Hikvision
  17. M

    Doorbird+Hikvision poe not working?

    Hello, Has anyone already connected a doorbird to a hikvision nvr via poe ? I am not managing to maje a doorbird d201b work with the hikvision nvr ds7600. It s not switching on. Any idea? Here is screenshot..
  18. V

    SOLVED - Need help with integration of Pakedge/Lilin camera with Hikvision NVR

    I am struggling with the integration of some Pakedge/Lilin CK-CAM-TU652 cameras with the Hikvison NVR DS-7608NXI-I2 / 8P/S. I try to add with ONVIF but nothing happens. All I get is "Offline(Network Abnormal)" I have enabled ONVIF under Network -> Advanced Settings -> Integration Protocol. Im...
  19. C

    Annke Firmware to Hikvision Firmware: HOW TO

    Wanted to post this for anyone that wanted to switch to Hikvision firmware. ---CHANGING FIRMWARE WILL NOT ADD NEW FEATRUES.. these are coded separately from the firmware. If you don't already have smart events it will not add them.--- It may fix or enhance existing functions or even stability...
    • cyrusbyte
    • Thread
    • annke c500 c800 firmware hikvision how to
    • Replies: 487
    • Forum: IP Cameras
  20. S

    Hikvision DS-7608NI-Q2/8P Can't remote configure image settings from iVMS-4200

    Hi, We have multiple Hikvision NVRs all connected through Hik-Connect. Everything is working correctly except: With two separate DS-7608NI-Q2/8P NVRs, using iVMS-4200 v3.5.0.7, on one I'm able to configure video and audio settings for each camera via: Maintenance and...
Top Bottom