I recently started working as tech support for a retail company that has around 50 shops. Each shop has about 6-8 hikvision cameras connected to a nvr that connects to the internet. The company has been using the ivms4200 software to view all 400 or so cameras. They are currently migrating to...
Hi,
This seems like a very bad miss-detection,
Due to not having outside sensor lights i run my two AcuSense 8MP front cameras off motion detection (stock settings) which actually works great. What is not great as at night time if a car goes past this will trigger the lights to come on which...
Hello,
I have this NVR Hikvision NVR DS-7616NI-E2 / 16P
Firmware version : V3.4.95 build 170626
Version encoder : V5.0 build 170228
One company install for us this NVR with 16 cameras before COVID19
we dont use this location because of COVID19
Now they dont replay to us
i try to get the NVR...
Is the IPC-T5442T-ZE still the best camera for under $200 or should I consider a different one? I want to replace my HikVision DS-2CD3132 with something better. Actually, I might continue using the HiVison cams for overview and install other cams (that work much better in low light) to zoom into...
So i have 2 cameras settled on position in my house and they are currently working with an SD cards and the phone app is very glitchy and i want to make my cameras use an NVR becouse there will be better app and more space for them to record but as i said i am not sure if it will work it says...
Hi
I created a new hik connect app and I am trying to reconnect to my hikvision doorbell DS-KB6403-WIP . Unfortunately it is bound to my previous account and asking for a password to unbind which i have forgotten. Is it possible to reset the password on these doorbells? there is no reset button...
Hi,
I have recently configured my indoor and door stations those are Hikvision DS-KH6320-WTE1 and DS-KV6113-WPE1. These are directly connected to a PoE switch and I am able to find them on my local network. Both are configured with HK-Connect and are accessible. But the problem is indoor...
Guys can you share the config of your cameras?
Mine just arrive and during night I only get 12.5 fps and a keyframe of 0.25, just upgrade for the last firmware and still can't get a consistent fps and keyframe.
I also can't see the sub-stream option only default.
Thanks
I have added 2 Hikvision DS-2CD2442FWD-IW cameras on a Dahua XVR but there is no audio as wells as 2-way audio.
I tried to add the cameras also on Synology's Surveilance Station and there' still no sound but 2-way audio is operational.
Is there any recommendation/setting to try?
Thanks in advance!!
Yesterday, my Hikvision DS-2DE1A404IW-DE3 just decided to change its presets in the middle of the day. and I can't figure out what to do to fix it. First let me say that I have been running this system with Blue Iris since 2019 I believe and don't change any settings unless something goes hay...
Hello,
I hope you can help me.
I have a Hikvision DS-2CD7A26G0P ANPR camera that is integrated via ISAPI with our software (we have a listening server that is capturing all images and detection details).
I would like to buy a Barrier Gate so that it opens automatically with the license plate...
I'm trying to avoid making more of a science project out of my security system thank it already is, and so asking for advice in choosing an NVR that will be reasonable to setup and reliable. I have (had) cameras 1, 2 below somewhat workign with Surveillence Station but the settings don't seem...
Greetings,
I'm brand new to ipcamtalk, but have been messing around with video, ipcams and streaming for many years. I'm also not sure where on the site to start asking my questions.
I had an Axis PTZ dome camera on a radio tower, streaming live to youtube using the camestreamer app for over...
We have an NVR that puts a date time stamp on the footage recorded as well as a long/lat coordinate.
Do any methods exist to export these pieces of information from the device in a csv format or similar?
Hello,
I thought that after 5 years of service I might need to break the warranty seal and see if there are any bulging capacitors inside or, who knows, maybe the IP66 rating was just on the paper and some small dust particle might still get inside after almost 44.000 hours of continuous...
Hello guys,
I was currently checking to buy a new doorbell and saw these 2:
https://www.hikvision.com/en/products/Video-Intercom-Products/IP-Series/Pro-Series/DS-KD8003-IME1-Flush/...
Hi
I have a Hikvision DS-KV6113 connected to a monitor DS-KH6320 via Ethernet.
The live view function also works fine, but if someone rings the bell it only says Calling Failed.
Also, I can't connect the bell to the app or the software for the PC.
Does Anyone know what I’m doing wrong?
Hey all!
Have recently upgraded my set up to the following
NVR-104MH-C-4P
Plus 2 xIPC-T250H-G
The issue I am having is that I cannot get the event to trigger at all! When I look at the area settings in the normal event section if I get someone to move around outside none of the red squares...
I have an EZVIZ DB1 doorbell (a rebranded Hikvision DS-HD1) and have used the Hikvision Device Network SDK (SDK) and their C++ examples to write some code to adjust things like camera exposure time and WDR enable/disable. But I haven't been able to find documentation or any info on changing some...
I've recently got addicted on home assistant and want to get the rtsp stream into home assistant so I can send image notifications. I have 4 cameras and 3 I can view the RTSP stream in VLC. One camera I cannot view the RTSP stream as vlc times out. I have my router set up so I can access the...
I cannot get motion detection recording working everything is running stock firmware. The NVR says the camera does not support motion detection (it is in the Hikvision mass configuration tool for the camera). Any suggestions on how to get it to work?
I've got an ezviz nvr and a ezviz c3w. The c3w is mounted outside, but should be within the wifi range, however occasionally it disconnects from the wifi and needs restarting. Clearly this isn't great from a security device (although I understand wifi isn't ideal). Anybody else experience these...
I have migrated from using a Dahua NVR (DHI-NVR4108-8P-4KS2 2T) to using Blue Iris, but still use the NVR to power the Dahua cameras with the built-in POE to save buying a separate POE switch.
This has worked well for a while now and I have recently purchased a new Hikvision Hilook camera...
Hi,
I've a very specific requirement for recording 4MP @ 50FPS and synchronous playback of upto 4 channels. I'll be using iDS-2CD7146G0-IZS camera, and I've been suggested DS-7608NI-I2 NVR by my local Hikvision rep. But I can only see the below specs under decoding of the NVR:
Synchronous...
Hi,
My first time posting here so please let me know if wrong area/format .. etc
I can no longer get a Live View of my HikVision door station. DS-KV6113-WPE1 in IVMS-4200.
When I click on Live View in IVMS-4200 i see two messages:
Door station_intercom controlling PTZ failed. It is not...
Hi,
I want to connect via UART to EZViz C4W camera, but connector is quite different than in Hikvision camera.
Does anyone know what type of connector it is?
I am considering installing dedicated LPR cameras around my property, and am currently in the planning stages. My current system is made up of 12 Hikvision Colorvu cameras, and a Hikvision NPR. I live in a single plate state, at the corner of a T intersection. Due to this, I'm planning on...
Howdy. Dave here. Glad to find this forum. I need to learn more about doorbell cams. I was looking at a Hikvision small PoE Door Station (DS-KV8113-IME1). I'd like to buy from my regular electronics store (which carries a lot of stuff/ and almost every brand), so I can get help if anything...