intercom

Hello. Need professional help. I received an ancient camera for the occasion. There is a microphone, speaker and alarm relays. I decided to use it as a calling panel and set up a video intercom in conjunction with tinycam. I attached a button to the alarm input relay and set up a call: you press...

Hi, everyone Its possible to use for example this intercom without indoor display? Using only the app? Thanks VTO1301R-W VTO2311R-WP VTO2201F-P

Hello everyone I have 2 dahua cameras (HDW5442TM-AS-LED) that I will install soon. So I did a long search about a good VTO & VTH that will perform well, and have the ability to show my cameras feed in the VTH. In future I will install a server to run BI or something else, but it is VTH only for...

Using the DSKV6113-PE1(C) Villa Intercom with 2 internal monitors and the Hik-Connect App for iPhone. When the doorbell is rung, it is calling my iPhone. Instead of calling, can the app provide a Badge / Banner notification instead?

Currently trying to update my VTH5241DW-S2 with the latest firmware (230303) from the dahua site but when trying to update with the 2nd bin file it reaches 50% and the VTH reboots. I have tried factory resetting and even using the older update file (221205) but the same issue occurs with the 2nd...

I purchased Hikvision intercom kit which comes with: Door station: DS-KV6113-WPE1(B) Indoor station: DS-KH6320-WTE1 I am facing difficulty in configuring it and I have reset both devices multiple times. Now with the latest configurations I am able to access both devices through HK-Connect...

Hi, I have recently configured my indoor and door stations those are Hikvision DS-KH6320-WTE1 and DS-KV6113-WPE1. These are directly connected to a PoE switch and I am able to find them on my local network. Both are configured with HK-Connect and are accessible. But the problem is indoor...

Hi guys, I have bought the vto2202f-p Dahua intercom. I have initialized and configured it by connecting it directly to the computer. I have also set the SIP and IP adress to be compatible with my LAN network (192.168.0.x). It works fine. However, after I connected the vto2202f-p to the switch...

Hi all, I own a VTO2211G-WP + VTH5341G-W but can't make it work and would like some advice. It is set up as one VTO and one VTH with VTO acting as SIP server. I can access VTO live view trough the VTH. But once I try to call the VTH from the VTO I get a black screen with the audio (only one...

Hey everyone, I have been fighting whole day today with my DS-KD8003-IME1/EU version. It has stopped working some day or days ago. I went to LIVE VIEW on my indoor station screen and got Username/Password message and no live view. I went to iVMS and opened Remote config. I planned to upgrade FW...

Hi I am using VTH1550CH & VTO3211D-P2. both of them upgraded with SIP firmware successfully. I could successfully register my extensions in the SIP server(ZYCOO U20) :) , but can not make calls :(. I think it's codec problem , although I've already enabled the video stream codec(H.264) and...

I have the second generation of hikvision intercom. I was wondering if i can make the outdoor record without NVR like recording on the indoor unit or on a computer or something

Hello, i have ds-kd8003-ime1 and ds-kh6320 the second generation of hikvision ip intercom and i want to connect it to the door i have a rim electric lock which has 2 wires and i don't know to which wires i must connect them. Thanks for your time.

Hi all, Problem I can't get group calling to work with video at the same time. They seem to wok mutually exclusively. I can either have both indoor units ring at the same time without video, OR only the main indoor unit ring with video. Obviously I'd like (expect) both units to ring with video...

Hi All, Anyone had experience with this new door station? Hikvision Australia was looking at the DS-KB6003-WIP Wi-Fi Video Doorbell but has no door release. In my case going to be triggering a sliding gate. I had a Doorbot Wifi intercom and that was terrible, prefer something hardwired for...

Hi there, I am currently looking into VTO3211D-P2 as the IP intercom for a two unit home. (Note: Newer generation: Recommended Replacement: VTO3211D-P-S2/P2-S2/P4-S2 but on the first look not much different really) It is a compact intercom / door station for two units - runing over IP (or to...

Hi, I'm doing a DIY install - the Dahua 2-wire kit with the VTNC3000A network controller and I'm having issues with the door strike - failing to release. Setup is: 24V 2.5A power to VTNC3000A controller - 2 wire from controller to VTH1550 24V/7W - 2 wire from controller to VTO200A 24V/10W - and...

Would it be possible to record the video stream from a sip video intercom, specifically a Fanvil i30? I have a freepbx server in place along with a box running blue iris. For security sake I'd like to record video stream if possible from the video intercom. The i30 does output video in h264...

Hello everyone, I have been searching for a considerable amount of time trying to find a product for my needs and I have been unsuccessful. I am now asking for help in desperation, I truly appreciate any responses I might get. Here are the bullet points... My Setup Blue Iris 3 PoE cameras All...

Just thought I'd post a little tutorial on how to properly format audio files for the new ringtone upload feature found on firmware version 1.4.0. This procedure took me a while to figure out and I couldn't find any proper documentation around it...unless you can call this snippet from the...

Not exactly an ip camera, but I'm getting desperate here so I thought I'd give the forum a try. This seems to be a very recent product line from HikVision suffering from poor documentation and little information over the web of other people's experiences...anyway I love my HikVision dome...