ivs
-
IVS isnt recording
Hello there, I recently bought the EmpireTech IPC-Color4K-T and now I wanted to set up IVS because Motion Detection really recorded every fly lol. But now I have the problem that IVS does not record. I sometimes (not always!) get a snapshot in the DMSS app, but it doesn't record at all. Can... -
J
How to Include Snapshots in IVS Event Payload?
Hello guys, I am using a Dahua IPC-HFW5842EP-ZE-2712-S3 camera that is on a local network. The camera can send IVS events (like line crossing) to my listening server, but I cannot access the camera from the internet to retrieve snapshots via an HTTP request. With Hikvision ISAPI, I can include... -
M
VCA Hikvision on Dahua NVR5232-EI
Hello everyone. I have a question to ask you: I have a NVR5232-EI with many dahua cams running "ai by camera" and 1 hikvision cam running "ai by recorder" with IVS. My NVR also has the ability to use face recognition/detection if the IVS of the relevant cam is disabled. Since my Hikvision cam...- michele5353
- Thread
- dahua hikvision ivs nvr-5232 vca
- Replies: 1
- Forum: Dahua
-
M
Empiretech generic Firmware NVR5232-El problem
Hi everyone, I would like to report a small problem on the generic empiretech firmware for nvr5232-el "V4.005.0000000.0.R.240514" I'm not sure if it's still a beta version firmware but as I was advised in another post "NVR5232-EL crash during playback" I updated it It works regularly but in the...- michele5353
- Thread
- dahua empiretech firmware ivs nvr5232 quicksearch
- Replies: 3
- Forum: NVR's, DVR's & Computers
-
New on NVR moving from raspberry pi AgentDVR to Dahua NVR
I'm rebuilding my cams system, I have 3 old Foscam ip cam (FI9816P) and one more recent ip cam IMOU CRUISER SE+4MP. I have been using raspberry pi with AgentDVR to monitor the 4 cams, it has been working fine, but usually video was not fluid. So I decided to give it a go on with Dahua NVR...- andresp
- Thread
- dahua nvr foscam ivs newbie sdm
- Replies: 9
- Forum: New Member Introductions
-
C
Note for IVS rules if not being detected
I have been doing this for a while now, but, got caught out on the IVS rules! It didn't jump out at me in guides or other forum answers until @wittaj pointed it out. After setting up IVS rules, make sure to Find/Inspect the camera in Blue Iris again, otherwise it will never work, at least not... -
C
Dahua TIOC camera does not recognize the IVS rule at night, original support is at a loss...
Hello Community, I would like to ask for help with the configuration of the Dahua camera model D-IPC-HFW3449T1P-ZAS-PV-27135. https://www.dahuasecurity.com/products/All-Products/Network-Cameras/WizSense-Series/TiOC/IPC-HFW3449T1-ZAS-PV The camera is mounted on the pillar in the outdoor area... -
G
Handling SMD/IVS events from IP cam on XVR recorder (Dahua)
Since I'm new to this forum, first I would like to say hello to everyone and apologize for my bad English :) Does anyone know if the latest generation Dahua XVR recorders (I3) support SMD/IVS events from IP cameras? I have an XVR7208A-4K-I3 recorder with 3 IPC-HFW5442E-SE cams. I have probably...- gustav2k
- Thread
- dahua ip camera ivs smd xvr
- Replies: 1
- Forum: NVR's, DVR's & Computers
-
T
ivs rules dont show up on screen
Hello, i have setup 2 Ivs rules on 2 cameras i selected the option AI via camera and selected intrusion and drawed my rule, but when i go back to the live view the ivs rules dont show up, however when i choose for AI via nvr they do show up. Can anyone help me -
P
SMD Alarms not appearing in Log anymore
I've got a bit of a odd problem with a Dahua DH-XVR5108H-4KL-I Recorder. We've got a reasonably big Setup with 6 HDCVI and 7 IPC-HFW3849T1-ZAS IP Cameras hooked up to the Recorder which were all installed by a Security company at my mothers place. The idea is that the IP cameras in the most...- ParanoidAndroid
- Thread
- alarm alarm event dahua ivs smd tripwire
- Replies: 5
- Forum: Dahua
-
L
Dahua IVS setup "Working Period" - Can't Edit?
I'm in the learning phase with several cameras purchased recently. The same issue is seen on both T5442TM-AS and 2431T-AS models I have: When setting up IVS there is a field for "Working Period" that looks like a schedule. It shows SUNbox in red with it's box checked & grayed out. I can check... -
only partial IPC features available after adding it to XVR (hybrid NVR + DVR of Dahua)
(XVR has only coax input connectors + a single IP input for network connectivity. it can get though an IP input as well). I've added a Dahua IPC (ipc-hdw5442tm-ase) to my XVR ( XVR5104HS-4KL-I3). Currently the entire video stream from this IPC is being recorded into my XVR HDD. Adding an IP... -
2
Dahua Tioc 2.0 IVS
Hi, I am wondering when the dahua TIOC 2.0 camera is ‘armed’, for it to only trigger on my IVS ruling of line crossing. At the moment I am having the issue of the camera strobe and siren go off whenever it detects a human walking past the house. As it is installed at the front of my house to...- 21 Savage
- Thread
- alarm dahua tioc 2.0 ivs
- Replies: 1
- Forum: Camera Installation Questions
-
SMD on Wifi Series (IPC-HFW1430DS-SAW)- opinions?
Hello there, I've had my eye on the wifi Series because it would spare me some money/trouble on cables extension ( particularly the IPC-HFW1430DS-SAW), and noticed that it had Smart Motion Detection (but only for humans), which suites me just fine since I would point it to my garden. Anyone else...- scottgerry32
- Thread
- dahua ivs smd
- Replies: 2
- Forum: Dahua
-
Dahua (Amcrest) IVS triggers to BI
New member, so sorry in advance. I have read several posts on here with little luck. I bought 2 Dahua's from Andy, and an Amcrest (also Dahua). I can't get any IVS events to integrate into BI. I see them logged in the camera itself, but it never triggers in BI. I occasionally get a Event... -
K
Dahua IP Camera, no IVS events inside camera log.
Hello, Dahua owners can someone explain it is normal behavior that camera do not log IVS event? My setup: IP camera IPC-HDBW2431E-S-S2, latest firmware from dahua site. Camera supports IVS, tripwire and intrusion. Camera records video to my ftp server. When i use motion detection , everything... -
5442's with audio linkage?
I've looked at most all of the 5442s I could find and I dont see that they have a built-in speaker like the Color4K-X does for audio out. I am trying to blast out the "you are under surveillance" audio recording when the IVS is triggered, i.e. Audio Linkage. I can't find a 5442 that supports... -
alarm wire from IPC-B5442E-Z4E
Couple questions about this guy. I have 5 skinny wires coming form the IPC-B5442E-Z4E. Where is the best place to find compatible devices that work with the Dahua cameras? I looked on the Dahua site but didn't see anything. I am looking for a siren and light, something that will generate sound... -
H
Dahua (Andy) and Blue Iris(Deepstack)
Hi All, do not know if its the right place or if it should be in the Dahua section, but here it goes :) I just bought 6 IPC-HDW5442TM-AS (Andy version) and added them to my Blue Iris system, so fare a happy owner of both the cams but also the software :D By question is, I have been reading a lot... -
A
Dahua camera LED only has flash/strobe setting, how can i make the LED stay on with a motion event? **SOLVED**
Hello everyone, i have followed with hundreds of these threads and loved the knowledge you all have so here is my question.. Just purchased a Dahua 2MP active deterrent IPC camera to add to the front door, (Model IPC-HDW5241H-AS-PV) I specifically chose this model as when i walked in the...- AymBro
- Thread
- dahua ivs led motion solid strobe light wizense
- Replies: 14
- Forum: IP Cameras
-
IVS scheduler
I bought the NVR608-32-4KS2 from Andy. I got everything working for the most part. The only thing I can't seem to figure out is the IVS Scheduler. No matter what I schedule, the audio alarm triggers once the tripwire is broken. Anyone know what might be the problem? I've tried google and... -
N
Dahua SD50225 IVS rules lost PTZ option
I have a Dahua SD50225 (amongst others) and I noticed something very strange. In the camera I have set up many IVS rules, some for intrusion, some on tripwires. Intrusion is used with autotracking, but the tripwires make the camera look in another direction. In short, IVS rule 1, with a...- NetEyeD
- Thread
- dahua ivs ptz sd50225 tripwire
- Replies: 11
- Forum: Camera Installation Questions
-
C
Ivs vs SMD and the length of detection
Hi there Thinking about using a 5 series dahua cameras for my companys outdoor area that needs to be protected. Can't decide what analytics I should go for. Should I go for the ivs human detection or smd? The important part is that I want as little false alarm as possible. And with the... -
N
DAHUA TiOC IVS misses human intrusions
Hi, I have a little problem with the Dahua TiOC cameras (5Mp, bullet and turret). Well, while fully aware of the fact that the general recommended height is above 3m I choose to mount mines at about 6m height. I know, I know... The reason for this choice is that my priority was that the flash... -
False alerts with IVS on new camera
I currently have 2 5442 cameras deployed with Dahua's IVS rules. One is a varifocal turrent, the other a 6mm fixed lens. The 6mm fixed lens is triggering constantly, I assume due to reflections and/or shadows. This is strange, as I have not had issues with the other camera. I assume this is due...- EyeOfSauron
- Thread
- dahua ivs trigger
- Replies: 5
- Forum: Dahua
-
A
Snapshot problem
Hello, I have a problem with FTP screenshots. I have IVS rules enabled, and "Log" checkbox is on, but somehow I'm getting 0kb screenshots every few seconds, while nothing is happening on screen. I think I checked every possible setting but i'm still getting those 0kb screenshots something. Does... -
D
IVS barely functioning
I just got a new setup. At the moment I only have 2 cameras and I've set them up inside to familiarize myself with them til my cat5 shows up so I can install them permanently. I have the N52B2P2 NVR with a N45EM63 4MP night color and a N42BJ62 4MP. The N42BJ62 is IVS enabled, and aside from the... -
S
IVS and Alarm Centre help
Hi all, I am having a frustrating time trying to figure out how to use the new upgraded user platform and the alarm centre with IVS activations. I have 4 x IPC-HDW4431EM-ASE, on a NVR4108-8P-4KS2 running the new V4.001.0000003.1 software. I think the new software is fantastic but can't seem to... -
L
SmartPSS error exporting footage with IVS/ intelligent sections using time clip [solved]
Hello all, I have IVS tripwires setup in some of my cameras but, until recently, could not export footage containing sections when they were triggered (they are recorded as Intelligent sections, orange in colour). I am using SmartPSS V2.003.0000001.0 2020-04-13. After selecting the required... -
P
Disabling IVS rules on Dahua NVR
So I've got my system with Dahua NVR and multiple Dahua POE cameras working pretty well but I still am trying to be able to enable and disable having an IVS rule trigger an alarm or an email via the http API. I've searched a number of the latest Dahua http API documents and still can't find an...- photogeek54
- Thread
- api dahua ivs nbvr
- Replies: 0
- Forum: NVR's, DVR's & Computers
