telnet

Hi everyone, i am new here. Here is my issue: I bought this H.264 Network DVR back in 2014. I need to connect using telnet to DVR, i got telnet on pc, the DVR is connected to router and ip pings with no problem, i can use the web browser interface connecting trough local ip, but when i try to...

I am looking to buy a low cost IP security camera whose stock firmware allows ssh/telnet access or with basic software and/or port forwarding tweaks (no debug UART wire attachment effort possible for me). Can anyone suggest some cheap (in the range of 2500-3000 INR) available in India that I can...

Hi, I have a DS7608HUHI-K1 DVR which is password locked. I have tried to reset the password on the device using TFTP on IP 192.0.0.128 but the DVR does not request the file when turned on. I have then connected to the device using the 4 pin connection to force the device to request the firmware...

Does anyone know how to connect Dahua nvr2108hs-8p-s2 via telnet Firmware : 3.205.0 build 2017-10-13 When I scan the open ports on my nvr I don't have telnet 23 open (see nmap result below) Nmap scan report for Dahua_NVR (192.168.1.15) Host is up (0.0045s latency). Not shown: 65531 closed...

I'm looking for an IP camera with a web interface (like a router) and/or telnet access to set it up as a streaming server in my LAN. I would record rtsp output with a Raspberry. In other words I don't wish to have to use CMS applications, smartphone apps, Onvif apps etc. to access to camera...

I'm sure most people here are aware of the security issues with having telnet access to your DVR/NVR/IP Cam open at all times. Especially with the Mirai botnet taking over defaulted (username and pass) Dahua and XM devices on a daily basis. While looking for a firmware the other day I ran...

Hi All, I have 3518c ip cams busybox installed. I have telnet access to them. Those cams has fixed timestamp and and model name as OSD on their stream. After each reboot cams times are not correct, mostly 1-2 minutes behind the current time. I did a search and it is commonly said Busybox don't...

Hi All, I have 3518c ip cams busybox installed. I have telnet access to them. Everytime I login cams using http browser panel and change main and substream kbps and fps value. But on every reboot cams turn to default settings. Is there a way to change cams default settings via telnet command...

Hi Dear IPCAMTalk'ers, I am stucked login HI3518 processor ipcam through telnet. I don't have root username and pass. I tried whole possibilities mentioned on google but no help. Does anyone help me how to find root username and password.. Warm Regards!

I received recently an Chiness Sunba 805-DG20X Camera, the camera has very good image, but probably bugy software because when I tried to change software option from 2 streams to 3 streams,the camera was not allowed to return to login, it show login screen, but don´t do anything when you hit OK...

*Problem solved* Finally got the davinci fix to work... Hi! I'm pretty sure I read somewhere that you could fix the NAS issue by sending some telnet commands that disabled some checks that caused the issues. The problem would return after reboot but that is ok for me. Does anyone know these...