djangel
Pulling my weight
- Joined
- Aug 30, 2014
- Messages
- 336
- Reaction score
- 149
Make sure your Discovery port in BlueIris is the same as your camera's http port. Also, use the OXML profile under the PTZ/Control. I'm almost certain that OXML = Onvif XMLWith the camera I didn't set up manually as per djangel's method, I still have no PTZ. Can you let me know what the camera and PTZ selections should be please? I see there's no Huisun option under PTZ any more.
Also, make sure you are using the correct userid and password when using the Find/Inspect option in BI.
Last edited by a moderator: