Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English

[finalcut62]

Thx for the super fast reply. However, the model I mentioned does seem to end in a "2". Sorry pardon me for being a total noob, but would it then work nevertheless.

 

[routerr]

Hi i have DS-2CD2032F-I V5.3.0_150513 what firmware i must use?

 

[whoslooking]

The original downgrader if it's a Chinese region camera.

 

[routerr]

I tried to upload this 5.3.0 to 5.2.5 Downgrader for CH Camera's https://www.dropbox.com/s/3hy72q4oss...rader.rar?dl=0 but camera don't responds

[2016-01-09 19:09:37] Device[192.0.0.64] test tftpserver
[2016-01-09 19:09:46] Connect client[192.0.0.64] success
[2016-01-09 19:09:46] Start file[C:\Users\route\Desktop\kamera\digicap.dav] transmitting
[2016-01-09 19:10:15] Completed file[C:\Users\route\Desktop\kamera\digicap.dav] transmit
[2016-01-09 19:10:38] Device[192.0.0.64] system update completed!

After this operation, camera IP is 192.168.1.64, but can not connect to it using a browser

 

[whoslooking]

The camera after the downgrade will have the IP 192.0.0.64
The IP won't be 192.168.1.64 that's why you can't connect.

 

[routerr]

After "system update completed!" i can't ping it on 192.0.0.64 but it appeared 192.168.1.64. I can ping this address (192.168.1.64) when camera is connected to LAN.
Mayby i uploaded wrong firmware. I bought it on ebay.com. I tried to update and then it stopped working.
Before I tried update I had Polish and English language.

 

[gilu]

Hi,
could someone please advise me which firmware i should use to downgrade DS-2cd3t35 camera so it will become multilanguage? I know 2cd3t35 models are beeing sold with multilanguage firmware, but i cannot find proper solution to "fix" it. Thanks in advance.

 

[SteveJ3333]

I too have a DS-2CD2532F-IS , I downloaded 5.3.0 from Europe website and added language hack and upgraded. Upgrade completed, SADP can see the camera, but I cannot access it via web interface or NVR.
Are you saying the downgrade tool will not work on this camera?

 

[whoslooking]

Yes it will.

 

[SteveJ3333]

Thanks Whoslooking, I downgraded back to 5.2.5 from your link above, but had to use Hikvision's Batch Upgrade Tool as couldn't get your one to work (operator error I'm sure).
Then carried out the MTD Hack to get it back to English. All because the Mic on the camera is giving no sound. An ongoing subject in this forum.

 

[whoslooking]

It seems everyone tries to use tftp first, rather than using the web upgrade which works just as good.

 

[SteveJ3333]

And even greater thanks to Whoslooking - after all this, the sound now works on my camera.
Oh yes!!

 

[whoslooking]

Another winner lol

 

[gilu]

Seems like nobody wants to talk about DS-2CD3T35 camera on this forum at all. I just wonder what is the reason of such situation. Is this camera not popular and there is no knowledge about it? I've found few threads on this forum where users were asking about this cam unfortunetelly all of them were left without any answer.
Why's that?

 

[whoslooking]

I wouldn't recommend buying to be honest, I would say go for Huisun mini ptz both run around the same price and that Model of HIK is ugly as F**£

 

[Antimosh]

Hi Guys, Going back to post #183 I also have some similar 2CD3132F-IW with firmware v5.30_150513 year 11/2015.

I did the TFTP downgrade but never got a system update complete message.
The device still appears in SADP but cant get to the page in the web browser. (And I did remember to put the IP range back to normal )

 

[a523309]

Thanks a ton for the firmware whoslooking and it save my bacon on three bricked 2032-I however it doesn't seem to work on the 2032F-I. It should be the same firmware for both right?

 

[nugget]

hi all,

finally got myself another 2732 but this one seems to be on fw 5.3.0.
i was under the impression this fw did not go well with if you wanted a non chinese interface
(the cam has kanji marks on top)
however it does work perfectly as any other english cam and my official ds-7608 recognises it perfectly
i thought starting from the 5.3.0. Hik did intent to screw us up with incompatibility issues etc.

it seems i may have been mistaken?
thanks for shortly clearing up any confusion

-----------------------------------------------------
Serial No. DS-2CD2732F-IS20151125CCCH5********
Firmware Version V5.3.0 build 150814
Encoding Version V5.0 build 150327

 

[whoslooking]

Thanks a ton for the firmware whoslooking and it save my bacon on three bricked 2032-I however it doesn't seem to work on the 2032F-I. It should be the same firmware for both right?

It will work, but only if it's a 5.30 if it's older then follow the other way s to downgrade.

 

[Bodyguard]

@whoslooking

Hi! I bought a DS-2DE3304W-DE mini PTZ chinese only with FW 5.3.10. I have the language missmtatch problem with IVMS-4200 Problem. Can I make my camera multi lingual and working with IVMS-4200?

Thanks in advance