Dahua Firmware Mod Kit + Modded Dahua Firmware

Thx corvet35,

Can I execute this script from /tmp on the camera?
 
marigo said:
Thx corvet35,

Can I execute this script from /tmp on the camera?
Click to expand...
I suggest making a new folder on the NFS/NAS mount or SD card.
Not sure how you'll get it off of /tmp otherwise.
Also /tmp might be too small?
 
Thank you for your suggestion.
I will try to see if I can dump the image.

EDIT: The image is copied to a NAS share (see image)

(sorry all noob questions)
Do I need to make a *.bin file from this output?
 

Attachments

  • image_cam.JPG
    image_cam.JPG
    38.1 KB · Views: 69
Last edited:
It looks like the firmware Mod-kit could not extract img in new firmware. But binwalk can extract it. Maybe Dahua has changed the header of image file and it's a Non-Standard SquashFS Images. @cor35vet: pls take a look.
Thanks
 
nhocti said:
It looks like the firmware Mod-kit could not extract img in new firmware. But binwalk can extract it. Maybe Dahua has changed the header of image file and it's a Non-Standard SquashFS Images. @cor35vet: pls take a look.
Thanks
Click to expand...
A link to the firmware would be helpful ...
 
Oleglevsha said:
you need this firmware version
DH_IPC-HX4XXX-Eos4_Chn_PN_Stream3_V2.600.0000.4.R.20170605.bin
If you change anything in this version of the firmware, change the checksums and the firmware will not to update
Click to expand...

Yes you get an error when trying to install on IPC-HDW4233C-A-V2. I think this is an Eos4 series.

@cor35vet
Is it possible to create a firmware for the Eos4 series?

Device Type IPC-HDW4233C-A-V2
Software Version 2.600.0000.2.R, Build Date: 2017-03-18

2017-06-05 firmware link:
http://download.dahuatech.com/kitDo...4_Chn_PN_Stream3_V2.600.0000.4.R.20170605.bin
 
The error message is: "File unmatch, Upgrade failed! Some functions have been closed, reboot device now?"
 
I have IPC-HDBW4431R-ZS camera in chinese. i have downloaded firmware For NAND-Eos (-ZS) cameras but it does not look like it liked it and upgrade was not done as at same version in Chinese.
current firmware 2.420.Dahua 00.22.R, build: 2016-12-09

Please help
 
Try to hard reset the camera (hold reset switch on mainboard for about 10 seconds while the camera is powered) and then apply the modded firmware (NAND version from OP).

Apperently there are two version of this camera:
  • build 2016-12-09
  • build 2016-07-24
But this model (HDBW4431R-ZS) is not listed anywhere on Dahua's site.
Maybe someone does have the original firmware of this camera and want to share it?
 
cor35vet said:
A link to the firmware would be helpful ...
Click to expand...
It seems Dahua uses new version of squashfs that the mod-kit could support. I took a look at the header of 2 img files of DH_NVR4XXX-4KS2 and 4K and saw that it's different.
Attachments are files header comparison and config file for NVR4XXX-4KS2 which I created and used.
@cor35vet: any news?
 

Attachments

On vacation until Tuesday, don't really want to look into it here.
 
I buy 6 Dahua 4431r-zs,one from this cam not working, i cant find it in configtool.what i can do to repair it.i can give my firmware from working cam, but you must say how i can get it from cam
 
Maximlis said:
I buy 6 Dahua 4431r-zs,one from this cam not working, i cant find it in configtool.what i can do to repair it.i can give my firmware from working cam, but you must say how i can get it from cam
Click to expand...
Does the IR even light up when you power it up?
Can you connect it directly to your Ethernet port and run Wireshark on it?
 
Yes the ir light up when power on, and i hear sounds of lens . When i reset this cam lens move ,but reset not help me,on ali shop xinray say if i cant find this cam througt configtool i can send it back.But i dont want to spend a lot of time and money for sending. I start wireshark , but it can not see anything
 
Maximlis said:
Are this camera has uart?
Click to expand...
Yeah, check out the recovery link in my signature on tips how to find the UART pins.
If you get a U-Boot shell you can do setenv dh_keyboard 0 and then boot to see the log and get a shell on UART.
 
nhocti said:
It seems Dahua uses new version of squashfs that the mod-kit could support. I took a look at the header of 2 img files of DH_NVR4XXX-4KS2 and 4K and saw that it's different.
Attachments are files header comparison and config file for NVR4XXX-4KS2 which I created and used.
@cor35vet: any news?
Click to expand...
nhocti said:
It looks like the firmware Mod-kit could not extract img in new firmware. But binwalk can extract it. Maybe Dahua has changed the header of image file and it's a Non-Standard SquashFS Images. @cor35vet: pls take a look.
Thanks
Click to expand...
Contact me !
 
Hello! I have four IPC-HFW4300r-z. I try to update firmware to new DH_IPC-HX5(4)XXX-Adreia_Eng_P_Stream3_V2.420.0009.0.R.20151106.zip (from dahua site)
3 of them updated success, but 1 not.
I don`t now why HWID changes to another type camera. (HFW2300R-Z, my camera is HFW4300R-Z)
Firmware updating process is good, but camera not avalible on port 80. It`s going bootloop (i'm using ping command to know about it). There are open ports: 23, 3800, 42323.
I think the trouble is wrong HWID. How can i change it to right one by telnet? Please, help me. And sorry for my English.
Here info:
cpu info
~ # cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 5 (v6l)
BogoMIPS : 526.25
Features : swp half fastmult edsp java
CPU implementer : 0x41
CPU architecture: 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5

Hardware : Coconut
Revision : 13ec300a
Serial : 0000000000000000
Click to expand...

netstat
~ # netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:42323 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:3800 0.0.0.0:* LISTEN
tcp 0 0 :::telnet :::* LISTEN
tcp 0 219 ::ffff:192.168.3.104:telnet ::ffff:10.8.0.4:54188 ESTABLISHED
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 627 /tmp/aaa
Click to expand...

bootpara
~ # cat /proc/dahua/bootpara
Status: idle
appauto:1
dh_keyboard:1
ethaddr:3c:ef:8c:cb:f4:96:
ID:2G01237PAA00136
fd:-1
debug:0
HWID:IPC-HFW2300R-Z:01:02:02:1F:0A:00:01:00:00:00:00:210:00:00:02:00:00:00:06:00:100
Click to expand...
printenv
~ # printenv
USER=root
LD_LIBRARY_PATH=/usr/local/lib:/usr/lib:/mnt/mtd/
HOME=/
LOGNAME=root
TERM=linux
PATH=/usr/bin:/usr/sbin:/bin:/sbin
SHELL=/bin/sh
PWD=/
Click to expand...

ps
~ # ps
PID USER TIME COMMAND
1 root 0:03 init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/u:0]
6 root 0:00 [khelper]
7 root 0:00 [kworker/u:1]
462 root 0:00 [sync_supers]
464 root 0:00 [bdi-default]
466 root 0:00 [kblockd]
556 root 0:00 [rpciod]
557 root 0:08 [kworker/0:1]
565 root 0:00 [kswapd0]
566 root 0:00 [fsnotify_mark]
567 root 0:00 [aio]
568 root 0:00 [nfsiod]
570 root 0:00 [crypto]
610 root 0:00 [mtdblock0]
615 root 0:00 [mtdblock1]
620 root 0:00 [mtdblock2]
625 root 0:00 [mtdblock3]
630 root 0:00 [mtdblock4]
635 root 0:00 [mtdblock5]
640 root 0:00 [mtdblock6]
645 root 0:00 [mtdblock7]
650 root 0:00 [mtdblock8]
655 root 0:00 [mtdblock9]
660 root 0:00 [mtdblock10]
665 root 0:00 [mtdblock11]
670 root 0:00 [mtdblock12]
678 root 0:00 [ubi_bgt0d]
726 root 0:00 [ubi_bgt1d]
733 root 0:00 [ubi_bgt2d]
740 root 0:00 [ubi_bgt3d]
747 root 0:00 [ubi_bgt4d]
754 root 0:00 [ubi_bgt5d]
758 root 0:00 [ubifs_bgt5_0]
763 root 0:00 [ubi_bgt6d]
767 root 0:00 [ubifs_bgt6_0]
772 root 0:00 [ubi_bgt7d]
776 root 0:00 [ubifs_bgt7_0]
794 root 0:00 /var/tmp/telnetd
803 root 0:00 [OSA_801_1]
831 root 0:00 [OSA_823_3]
844 root 0:00 [OSA_823_4]
869 root 0:00 syshelper yshelper 60
870 root 0:00 /var/tmp/upgraded
878 root 0:00 [OSA_875_5]
879 root 0:00 [dsplogd]
880 root 0:00 [encode_guard]
898 root 0:00 [flush-ubifs_6_0]
917 root 0:00 [OSA_915_6]
951 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
953 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
954 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
955 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
956 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
957 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
959 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
960 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
961 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
962 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
964 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
970 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
971 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
972 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
973 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
976 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
977 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
978 root 4:38 ./VideoDaemon EX2 AEWB AF MOTOR TVOUT
988 root 0:00 /bin/sh /etc/init.d/appauto
992 root 0:00 pppd
998 root 0:00 pppd
1006 root 0:00 /bin/sh ./usr/etc/app.sh
1008 root 0:05 /usr/bin/sonia
1009 root 0:05 /usr/bin/sonia
1010 root 0:05 /usr/bin/sonia
1011 root 0:05 /usr/bin/sonia
1012 root 0:05 /usr/bin/sonia
1013 root 0:05 /usr/bin/sonia
1014 root 0:05 /usr/bin/sonia
1015 root 0:05 /usr/bin/sonia
1016 root 0:05 /usr/bin/sonia
1017 root 0:05 /usr/bin/sonia
1018 root 0:05 /usr/bin/sonia
1019 root 0:05 /usr/bin/sonia
1020 root 0:05 /usr/bin/sonia
1021 root 0:05 /usr/bin/sonia
1022 root 0:05 /usr/bin/sonia
1023 root 0:00 -sh
1049 root 0:00 ps
Click to expand...

Here is updating log (update by config tool using port 3800):
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.08.28 12:24:00 =~=~=~=~=~=~=~=~=~=~=~=
/usr/sbin/upgraded
[m

[m[0;32;32m[OSA-APP] OSA Build on Dec 5 2014 at 14:54:43.
[m[0;32;32m[OSA-APP] SVN NUM: 2587.

[m[0;32;32m[libpdi] libpdi.so Build on Dec 5 2014 at 15:08:45.
[m[0;32;32m[libpdi] SVN NUM: 17543.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 4,patSize = 100000,rwSize = 800,ersSize = 20000
[0;32;32m12:24:10|[crypt] crypt_open ok!
[m[0;32;32m12:24:10|[crypt]

Crypt Build on Dec 5 2014 at 14:23:54.
[m[0;32;32m12:24:10|[crypt] SVN NUM: 1797.

[m[m[0;32;32m[libpdi] phyaddr= 0xc8bfe000, memLen= 0x2000
[0;32;32m12:24:10|[pdc] Both of Chief and Backup File CRC check OK!
[m[mName: upgraded, bulid date: Dec 5 2014 14:11:56, svn: 255
[0;32;32m[libpdi] >-------getSystemInfo------->
[mFail to get env authcode!
[0;32;32m[libpdi] Get authcode error
[1;33m12:24:17|[pdc] WARN (MISC_ioctl|537): Get SdCard cfg failed !
[m[m[0;32;32m[libpdi] deviceType: IPC-HFW4300R-Z
[m[0;32;32m[libpdi] processorType: 10
[m[0;32;32m[libpdi] hardwareVersion: 1.60
[m[0;32;32m[libpdi] appAutoStart: 1
[m[0;32;32m[libpdi] serialNumber: 2G01237PAA00136
[m[0;32;32m[libpdi] deviceClass: IPC
[m[0;32;32m[libpdi] noPtz: 1
[m[0;32;32m[libpdi] noSdCard: 1
[m[0;32;32m[libpdi] bandWidth: 48
[m[0;32;32m[libpdi] <-------getSystemInfo-------<
[mUPGRADED_MSG: Can't Open /mnt/mtd/Config/passwd
UPGRADED_MSG: Login success!
UPGRADED_MSG: Kill 1008 successful
[0;32;32m[libpdi] Read: blkIndex: 1,pageIndex: 0,byteIndex: 0 ,fLag: ff
[m[0;32;32m[libpdi] Write: blkIndex: 1,pageIndex: 0,byteIndex: 0 ,fLag: 0
UPGRADED_MSG: Received : 31239456, FileSize : 31239456
UPGRADED_MSG: Download Complete
UPGRADED_MSG: DoDownLoad success!
UPGRADED_MSG: Flash init success
UPGRADED_MSG: hwid file success!
Fail to get env native!
UPGRADED_ERR: LINE: 1074: invalid file: Install.lua
UPGRADED_MSG: zip file total size: 41797380
[0;32;32m[libpdi] >-------getSystemInfo------->
[mFail to get env authcode!
[0;32;32m[libpdi] Get authcode error
[1;33m12:26:29|[pdc] WARN (MISC_ioctl|537): Get SdCard cfg failed !
[m[m[0;32;32m[libpdi] deviceType: IPC-HFW4300R-Z
[m[0;32;32m[libpdi] processorType: 10
[m[0;32;32m[libpdi] hardwareVersion: 1.60
[m[0;32;32m[libpdi] appAutoStart: 1
[m[0;32;32m[libpdi] serialNumber: 2G01237PAA00136
[m[0;32;32m[libpdi] deviceClass: IPC
[m[0;32;32m[libpdi] noPtz: 1
[m[0;32;32m[libpdi] noSdCard: 1
[m[0;32;32m[libpdi] bandWidth: 48
[m[0;32;32m[libpdi] <-------getSystemInfo-------<
[mUPGRADED_MSG: packet.name: SD6XXX, board.name: IPC-HFW4300R-Z
UPGRADED_MSG: packet.hardver: , board.hardver:
UPGRADED_MSG: packet.name: IPC-HX3XXX, board.name: IPC-HFW4300R-Z
UPGRADED_MSG: packet.hardver: , board.hardver:
UPGRADED_MSG: Verify version success

Header CRC Checking ... OK
Image Name: dhboot.bin.img
Image Type: dhboot.bin.img (gzip compressed)
Data Size: 317504 B, Bytes = 0.30 MB
Load Address: 0X200000
Data CRC Checking ... OK
Programing start at: 0X200000

[0;36m[libpdi] write update Flag
[m[0;32;32m[libpdi] Read: blkIndex: 0,pageIndex: 0,byteIndex: 0 ,fLag: ff
[m[0;32;32m[libpdi] Write: blkIndex: 0,pageIndex: 0,byteIndex: 0 ,fLag: 55
[m[0;36m[libpdi] Flash_createPartionTab:0
[m[0;36m[libpdi] Erase Partion: 0
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x200000,blkNum:8, blkSize:0x20000,len:0x100000
<5>UBIFS: un-mount UBI device 2, volume 0
<5>UBIFS: un-mount UBI device 4, volume 0
[m
Upgrade : Complete Total 0%...
Upgrade : Complete Total 0%...
Upgrade : Complete Total 0%...
Header CRC Checking ... OK
Image Name: kernel.img
Image Type: kernel.img (gzip compressed)
Data Size: 2547012 B, Bytes = 2.43 MB
Load Address: 0XC80000
Data CRC Checking ... OK
Programing start at: 0XC80000

[0;36m[libpdi] Flash_createPartionTab:6
[m[0;36m[libpdi] Erase Partion: 6
[m[0;32;32m[libpdi] FlashErase: addr= 0x0xc80000,blkNum:44, blkSize:0x20000,len:0x580000
[m
Upgrade : Complete Total 1%...
Upgrade : Complete Total 1%...
Upgrade : Complete Total 1%...
Upgrade : Complete Total 2%...
Upgrade : Complete Total 2%...
Upgrade : Complete Total 2%...
Upgrade : Complete Total 2%...
Upgrade : Complete Total 3%...
Upgrade : Complete Total 3%...
Upgrade : Complete Total 3%...
Upgrade : Complete Total 4%...
Upgrade : Complete Total 4%...
Upgrade : Complete Total 4%...
Upgrade : Complete Total 5%...
Upgrade : Complete Total 5%...
Upgrade : Complete Total 5%...
Upgrade : Complete Total 6%...
Upgrade : Complete Total 6%...
Upgrade : Complete Total 6%...
Upgrade : Complete Total 6%...
Header CRC Checking ... OK
Image Name: partition-x.cramfs.img
Image Type: partition-x.cramfs.img (gzip compressed)
Data Size: 4160 B, Bytes = 0.00 MB
Load Address: 0X500000
Data CRC Checking ... OK
Programing start at: 0X500000

[0;36m[libpdi] Flash_createPartionTab:3
[m[0;36m[libpdi] Erase Partion: 3
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x500000,blkNum:8, blkSize:0x20000,len:0x100000
[m
Upgrade : Complete Total 6%...
Header CRC Checking ... OK
Image Name: romfs-x.ubifs.img
Image Type: romfs-x.ubifs.img (gzip compressed)
Data Size: 7340096 B, Bytes = 7.00 MB
Load Address: 0X1200000
Data CRC Checking ... OK
Programing start at: 0X1200000

[0;36m[libpdi] Flash_createPartionTab:7
[m[0;36m[libpdi] Erase Partion: 7
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x1200000,blkNum:64, blkSize:0x20000,len:0x800000
[m
Upgrade : Complete Total 7%...
Upgrade : Complete Total 7%...
Upgrade : Complete Total 7%...
Upgrade : Complete Total 8%...
Upgrade : Complete Total 8%...
Upgrade : Complete Total 8%...
Upgrade : Complete Total 9%...
Upgrade : Complete Total 9%...
Upgrade : Complete Total 9%...
Upgrade : Complete Total 9%...
Upgrade : Complete Total 10%...
Upgrade : Complete Total 10%...
Upgrade : Complete Total 10%...
Upgrade : Complete Total 11%...
Upgrade : Complete Total 11%...
Upgrade : Complete Total 11%...
Upgrade : Complete Total 12%...
Upgrade : Complete Total 12%...
Upgrade : Complete Total 12%...
Upgrade : Complete Total 13%...
Upgrade : Complete Total 13%...
Upgrade : Complete Total 13%...
Upgrade : Complete Total 14%...
Upgrade : Complete Total 14%...
Upgrade : Complete Total 14%...
Upgrade : Complete Total 15%...
Upgrade : Complete Total 15%...
Upgrade : Complete Total 15%...
Upgrade : Complete Total 15%...
Upgrade : Complete Total 16%...
Upgrade : Complete Total 16%...
Upgrade : Complete Total 16%...
Upgrade : Complete Total 17%...
Upgrade : Complete Total 17%...
Upgrade : Complete Total 17%...
Upgrade : Complete Total 18%...
Upgrade : Complete Total 18%...
Upgrade : Complete Total 18%...
Upgrade : Complete Total 19%...
Upgrade : Complete Total 19%...
Upgrade : Complete Total 19%...
Upgrade : Complete Total 20%...
Upgrade : Complete Total 20%...
Upgrade : Complete Total 20%...
Upgrade : Complete Total 20%...
Upgrade : Complete Total 21%...
Upgrade : Complete Total 21%...
Upgrade : Complete Total 21%...
Upgrade : Complete Total 22%...
Upgrade : Complete Total 22%...
Upgrade : Complete Total 22%...
Upgrade : Complete Total 23%...
Upgrade : Complete Total 23%...
Upgrade : Complete Total 23%...
Upgrade : Complete Total 24%...
Upgrade : Complete Total 24%...
Header CRC Checking ... OK
Image Name: pd-x.ubifs.img
Image Type: pd-x.ubifs.img (gzip compressed)
Data Size: 1704000 B, Bytes = 1.63 MB
Load Address: 0X940000
Data CRC Checking ... OK
Programing start at: 0X940000

[0;36m[libpdi] Flash_createPartionTab:5
[m[0;36m[libpdi] Erase Partion: 5
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x940000,blkNum:26, blkSize:0x20000,len:0x340000
[m
Upgrade : Complete Total 24%...
Upgrade : Complete Total 25%...
Upgrade : Complete Total 25%...
Upgrade : Complete Total 25%...
Upgrade : Complete Total 25%...
Upgrade : Complete Total 26%...
Upgrade : Complete Total 26%...
Upgrade : Complete Total 26%...
Upgrade : Complete Total 27%...
Upgrade : Complete Total 27%...
Upgrade : Complete Total 27%...
Upgrade : Complete Total 28%...
Upgrade : Complete Total 28%...
Header CRC Checking ... OK
Image Name: user-x.ubifs.img
Image Type: user-x.ubifs.img (gzip compressed)
Data Size: 20447296 B, Bytes = 19.50 MB
Load Address: 0X2200000
Data CRC Checking ... OK
Programing start at: 0X2200000

[0;36m[libpdi] Flash_createPartionTab:9
[m[0;36m[libpdi] Erase Partion: 9
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x2200000,blkNum:204, blkSize:0x20000,len:0x1980000
[m
Upgrade : Complete Total 28%...
Upgrade : Complete Total 29%...
Upgrade : Complete Total 29%...
Upgrade : Complete Total 29%...
Upgrade : Complete Total 30%...
Upgrade : Complete Total 30%...
Upgrade : Complete Total 30%...
Upgrade : Complete Total 31%...
Upgrade : Complete Total 31%...
Upgrade : Complete Total 31%...
Upgrade : Complete Total 31%...
Upgrade : Complete Total 32%...
Upgrade : Complete Total 32%...
Upgrade : Complete Total 32%...
Upgrade : Complete Total 33%...
Upgrade : Complete Total 33%...
Upgrade : Complete Total 33%...
Upgrade : Complete Total 34%...
Upgrade : Complete Total 34%...
Upgrade : Complete Total 34%...
Upgrade : Complete Total 35%...
Upgrade : Complete Total 35%...
Upgrade : Complete Total 35%...
Upgrade : Complete Total 36%...
Upgrade : Complete Total 36%...
Upgrade : Complete Total 36%...
Upgrade : Complete Total 36%...
Upgrade : Complete Total 37%...
Upgrade : Complete Total 37%...
Upgrade : Complete Total 37%...
Upgrade : Complete Total 38%...
Upgrade : Complete Total 38%...
Upgrade : Complete Total 38%...
Upgrade : Complete Total 39%...
Upgrade : Complete Total 39%...
Upgrade : Complete Total 39%...
Upgrade : Complete Total 40%...
Upgrade : Complete Total 40%...
Upgrade : Complete Total 40%...
Upgrade : Complete Total 41%...
Upgrade : Complete Total 41%...
Upgrade : Complete Total 41%...
Upgrade : Complete Total 41%...
Upgrade : Complete Total 42%...
Upgrade : Complete Total 42%...
Upgrade : Complete Total 42%...
Upgrade : Complete Total 43%...
Upgrade : Complete Total 43%...
Upgrade : Complete Total 43%...
Upgrade : Complete Total 44%...
Upgrade : Complete Total 44%...
Upgrade : Complete Total 44%...
Upgrade : Complete Total 45%...
Upgrade : Complete Total 45%...
Upgrade : Complete Total 45%...
Upgrade : Complete Total 46%...
Upgrade : Complete Total 46%...
Upgrade : Complete Total 46%...
Upgrade : Complete Total 47%...
Upgrade : Complete Total 47%...
Upgrade : Complete Total 47%...
Upgrade : Complete Total 47%...
Upgrade : Complete Total 48%...
Upgrade : Complete Total 48%...
Upgrade : Complete Total 48%...
Upgrade : Complete Total 49%...
Upgrade : Complete Total 49%...
Upgrade : Complete Total 49%...
Upgrade : Complete Total 50%...
Upgrade : Complete Total 50%...
Upgrade : Complete Total 50%...
Upgrade : Complete Total 51%...
Upgrade : Complete Total 51%...
Upgrade : Complete Total 51%...
Upgrade : Complete Total 52%...
Upgrade : Complete Total 52%...
Upgrade : Complete Total 52%...
Upgrade : Complete Total 52%...
Upgrade : Complete Total 53%...
Upgrade : Complete Total 53%...
Upgrade : Complete Total 53%...
Upgrade : Complete Total 54%...
Upgrade : Complete Total 54%...
Upgrade : Complete Total 54%...
Upgrade : Complete Total 55%...
Upgrade : Complete Total 55%...
Upgrade : Complete Total 55%...
Upgrade : Complete Total 56%...
Upgrade : Complete Total 56%...
Upgrade : Complete Total 56%...
Upgrade : Complete Total 57%...
Upgrade : Complete Total 57%...
Upgrade : Complete Total 57%...
Upgrade : Complete Total 57%...
Upgrade : Complete Total 58%...
Upgrade : Complete Total 58%...
Upgrade : Complete Total 58%...
Upgrade : Complete Total 59%...
Upgrade : Complete Total 59%...
Upgrade : Complete Total 59%...
Upgrade : Complete Total 60%...
Upgrade : Complete Total 60%...
Upgrade : Complete Total 60%...
Upgrade : Complete Total 61%...
Upgrade : Complete Total 61%...
Upgrade : Complete Total 61%...
Upgrade : Complete Total 62%...
Upgrade : Complete Total 62%...
Upgrade : Complete Total 62%...
Upgrade : Complete Total 62%...
Upgrade : Complete Total 63%...
Upgrade : Complete Total 63%...
Upgrade : Complete Total 63%...
Upgrade : Complete Total 64%...
Upgrade : Complete Total 64%...
Upgrade : Complete Total 64%...
Upgrade : Complete Total 65%...
Upgrade : Complete Total 65%...
Upgrade : Complete Total 65%...
Upgrade : Complete Total 66%...
Upgrade : Complete Total 66%...
Upgrade : Complete Total 66%...
Upgrade : Complete Total 67%...
Upgrade : Complete Total 67%...
Upgrade : Complete Total 67%...
Upgrade : Complete Total 68%...
Upgrade : Complete Total 68%...
Upgrade : Complete Total 68%...
Upgrade : Complete Total 68%...
Upgrade : Complete Total 69%...
Upgrade : Complete Total 69%...
Upgrade : Complete Total 69%...
Upgrade : Complete Total 70%...
Upgrade : Complete Total 70%...
Upgrade : Complete Total 70%...
Upgrade : Complete Total 71%...
Upgrade : Complete Total 71%...
Upgrade : Complete Total 71%...
Upgrade : Complete Total 72%...
Upgrade : Complete Total 72%...
Upgrade : Complete Total 72%...
Upgrade : Complete Total 73%...
Upgrade : Complete Total 73%...
Upgrade : Complete Total 73%...
Upgrade : Complete Total 73%...
Upgrade : Complete Total 74%...
Upgrade : Complete Total 74%...
Upgrade : Complete Total 74%...
Upgrade : Complete Total 75%...
Upgrade : Complete Total 75%...
Upgrade : Complete Total 75%...
Upgrade : Complete Total 76%...
Upgrade : Complete Total 76%...
Upgrade : Complete Total 76%...
Upgrade : Complete Total 77%...
Upgrade : Complete Total 77%...
Header CRC Checking ... OK
Image Name: custom-x.ubifs.img
Image Type: custom-x.ubifs.img (gzip compressed)
Data Size: 1704000 B, Bytes = 1.63 MB
Load Address: 0X600000
Data CRC Checking ... OK
Programing start at: 0X600000

[0;36m[libpdi] Flash_createPartionTab:4
[m[0;36m[libpdi] Erase Partion: 4
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x600000,blkNum:26, blkSize:0x20000,len:0x340000
[m
Upgrade : Complete Total 77%...
Upgrade : Complete Total 78%...
Upgrade : Complete Total 78%...
Upgrade : Complete Total 78%...
Upgrade : Complete Total 78%...
Upgrade : Complete Total 79%...
Upgrade : Complete Total 79%...
Upgrade : Complete Total 79%...
Upgrade : Complete Total 80%...
Upgrade : Complete Total 80%...
Upgrade : Complete Total 80%...
Upgrade : Complete Total 81%...
Upgrade : Complete Total 81%...
Header CRC Checking ... OK
Image Name: web-x.ubifs.img
Image Type: web-x.ubifs.img (gzip compressed)
Data Size: 7733312 B, Bytes = 7.38 MB
Load Address: 0X1A00000
Data CRC Checking ... OK
Programing start at: 0X1A00000

[0;36m[libpdi] Flash_createPartionTab:8
[m[0;36m[libpdi] Erase Partion: 8
[m[0;32;32m[libpdi] FlashErase: addr= 0x0x1a00000,blkNum:64, blkSize:0x20000,len:0x800000
[m
Upgrade : Complete Total 81%...
Upgrade : Complete Total 82%...
Upgrade : Complete Total 82%...
Upgrade : Complete Total 82%...
Upgrade : Complete Total 83%...
Upgrade : Complete Total 83%...
Upgrade : Complete Total 83%...
Upgrade : Complete Total 84%...
Upgrade : Complete Total 84%...
Upgrade : Complete Total 84%...
Upgrade : Complete Total 84%...
Upgrade : Complete Total 85%...
Upgrade : Complete Total 85%...
Upgrade : Complete Total 85%...
Upgrade : Complete Total 86%...
Upgrade : Complete Total 86%...
Upgrade : Complete Total 86%...
Upgrade : Complete Total 87%...
Upgrade : Complete Total 87%...
Upgrade : Complete Total 87%...
Upgrade : Complete Total 88%...
Upgrade : Complete Total 88%...
Upgrade : Complete Total 88%...
Upgrade : Complete Total 89%...
Upgrade : Complete Total 89%...
Upgrade : Complete Total 89%...
Upgrade : Complete Total 89%...
Upgrade : Complete Total 90%...
Upgrade : Complete Total 90%...
Upgrade : Complete Total 90%...
Upgrade : Complete Total 91%...
Upgrade : Complete Total 91%...
Upgrade : Complete Total 91%...
Upgrade : Complete Total 92%...
Upgrade : Complete Total 92%...
Upgrade : Complete Total 92%...
Upgrade : Complete Total 93%...
Upgrade : Complete Total 93%...
Upgrade : Complete Total 93%...
Upgrade : Complete Total 94%...
Upgrade : Complete Total 94%...
Upgrade : Complete Total 94%...
Upgrade : Complete Total 94%...
Upgrade : Complete Total 95%...
Upgrade : Complete Total 95%...
Upgrade : Complete Total 95%...
Upgrade : Complete Total 96%...
Upgrade : Complete Total 96%...
Upgrade : Complete Total 96%...
Upgrade : Complete Total 97%...
Upgrade : Complete Total 97%...
Upgrade : Complete Total 97%...
Upgrade : Complete Total 98%...
Upgrade : Complete Total 98%...
Upgrade : Complete Total 98%...
Upgrade : Complete Total 99%...
Upgrade : Complete Total 99%...
Upgrade : Complete Total 99%...
Upgrade : Complete Total 100%... [0;32;32m[libpdi] Read: blkIndex: 0,pageIndex: 1,byteIndex: 0 ,fLag: ff
[m[0;32;32m[libpdi] Write: blkIndex: 0,pageIndex: 1,byteIndex: 0 ,fLag: aa
[mUPGRADED_MSG: will reboot system
[0;32;32m[libpdi] rebootSystem: i will reboot
[m[0;32;32m[libpdi] Read: blkIndex: 1,pageIndex: 0,byteIndex: 0 ,fLag: ff
[m[0;32;32m[libpdi] Write: blkIndex: 1,pageIndex: 0,byteIndex: 0 ,fLag: 0
[m[0;32;32m[libpdi] pdi:system will reboot!!
Click to expand...
 
Last edited:
You must log in or register to reply here.
Top Bottom